mcarterbrown.com  

Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!

Reply
 
Thread Tools Search this Thread
Old 06-27-2017, 03:35 PM   #1 (permalink)
MCB Member
 
Spydercam's Avatar
 
Join Date: Apr 2016
Location: Germany

Universal Compact Boxmag

Hi,
here iīm going to build me a max. compact boxmag, finaly for fit on my TMC but you have all Options, you just Need to build your box to fit on your Magwell.

I took the gearbox housing etc., board etc. from my HaloToo and fit the Slim cyclonefeed on top. So you have a very Slim and real looking size Setup !!!

Here on pic one i set it like i go build the box for my TMC, it will be not much more than the cyclonehousing Diameter in wide(left and right side), high will be the line top of the grip max. so i Count with ca. 100rounds !?!?!? We gonna see after i build the box !!!

Here a test vid. of:

http://www.youtube.com/watch?v=9w-eNiNOUg4








Last edited by Spydercam; 06-27-2017 at 03:51 PM.
Spydercam is offline   Reply With Quote
Old 06-27-2017, 08:56 PM   #2 (permalink)
WOOP WOOOOOOOOP
 
iKNOWaFATman's Avatar
 
Join Date: Jul 2016

CCM Fan
Brass and Wood Fan
PPS Fan
Thats small home made bix set up. Cant wait to see it finished.
iKNOWaFATman is offline   Reply With Quote
Old 06-28-2017, 03:53 PM   #3 (permalink)
MCB Member
 
Spydercam's Avatar
 
Join Date: Apr 2016
Location: Germany

Me too !!!

Here i build a Testbox to figure out the size, what would fit in etc.

Need to think about what material i go use and what Kind of doors, may Change design to have less sqaure looking etc. !?!?!?







Spydercam is offline   Reply With Quote
Old 06-29-2017, 05:42 PM   #4 (permalink)
MCB Member
 
Spydercam's Avatar
 
Join Date: Apr 2016
Location: Germany

Here i build the new final connector axle, i found the (to long) rod in my cocker parts. Now i got 2 Solutions of making it set right: 1st build a spacer out of a pipe and use a nut or 2nd cut the rod and glue it in. I also build out of an alu pipe a connector for the cyclonefeed arms. The engine is now well fixed by ...
so the internals are done and just build the box is left !!!






Spydercam is offline   Reply With Quote
Old 06-30-2017, 09:56 PM   #5 (permalink)
WOOP WOOOOOOOOP
 
iKNOWaFATman's Avatar
 
Join Date: Jul 2016

CCM Fan
Brass and Wood Fan
PPS Fan
Interested to see your box. Are you going to do a whole fiberglass box?
iKNOWaFATman is offline   Reply With Quote
Old 07-01-2017, 02:46 PM   #6 (permalink)
Post Whore
 
punisher068's Avatar
 
Join Date: Mar 2009
Location: Santa Cruz Mountains

That's pretty awesome
Always enjoy the ingenuity and fabrication on your builds
__________________
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
My feedback
http://www.mcarterbrown.com/forums/f...-feedback.html
punisher068 is offline   Reply With Quote
Old 07-04-2017, 07:01 AM   #7 (permalink)
MCB Member
 
Spydercam's Avatar
 
Join Date: Apr 2016
Location: Germany

The box still not done !!! Main i go use alu sheet metal for the box and may if ... some Fiberglas for deatils, high precission parts or like for closing holes etc.

Thanks, i do my best with what i got !

Itīs getting smaller a bit, but also i get more Volume by cut the cyclone housing and feedneck.

So iīve got the final plan:
The box will be out of three main parts. 1st one the top Piece includes door, mag adaptor and strong Frame for connect to Piece 2. the lower box which is just an empty box. Piece 3 will be the engine, cyclone etc. unit which you just put into the lower box.

As soon i got the sheet metal i will go on !!!











Last edited by Spydercam; 07-04-2017 at 08:35 AM.
Spydercam is offline   Reply With Quote
Old 07-04-2017, 09:54 AM   #8 (permalink)
Seasoned Member
 
Join Date: Apr 2016

Don't forget to move the mic. I moved mine to the top front of the box with long wires. Little tape holds it in its new hole. Easy to move for maintenance.
__________________
Spyder MR1 - the classy rec.
Spyder MR2 Low Pressure w/eyes mod
Spyder Victor
Spyder E-MR5 - for those huge scenario games
seajay is offline   Reply With Quote
Old 07-04-2017, 10:20 AM   #9 (permalink)
MCB Member
 
big jim's Avatar
 
Join Date: Sep 2006
Location: Dodge City Kansas, kind of like the Old West

I just mounted the whole board to the top door. It sure made a big difference in picking up the sound.
__________________
Big Jim

Quote:
Originally Posted by Mr. Furious View Post
You'll have a tough time finding a nicer group of people on the internet(even if our opinions all suck).

Quote:
Originally Posted by Vitalsilence View Post
I've dealt with canadians several times and I usually undercharge by 2-5 dollars cause I feel bad for them sometimes. Just my 2cents.

feedback http://www.mcarterbrown.com/forums/f...k-big-jim.html
big jim is offline   Reply With Quote
Old 07-04-2017, 11:30 AM   #10 (permalink)
MCB Member
 
Spydercam's Avatar
 
Join Date: Apr 2016
Location: Germany

My mic is just in that Position cause my board had an accident a Long time ago with some fiberglas, thatīs why the Switch isnīt stock too !!!

Iīm optimistic that the Shooting noise of the TMC is loud enough, so i donīt have to move mic or board(in my A5 Boxmag it worked well). The mag Adapter(modified AR Mag.) sitīs super tight(much better than stock magazines), so each shake of the marker will Comes to the box !!!
Spydercam is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Custom Projects / Custom Questions

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:57 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC