semi-pgp Q ram,lpr,3way threads

BE_Rogue · 09-07-2006, 04:28 PM

I'ld like to know what the threads for autococker Rams, 3-ways, and LPRs are.
I tried matching them up at ACE but nothing seemed 'perfect'.

also where to get a spring to use for a stick/spring-feed ?

blackrain · 09-07-2006, 05:02 PM

3 way threads 15/32-32 you need a 15/32 drill bit to make the threaded hole.I had to special order the tap and drill bit. LPR is 1/8 NPT threads use an "S" or "R" drill bit.
Hope this helps.

blackrain · 09-07-2006, 05:05 PM

This should help you too.
http://haveblue.org/tech/autococker/
Later,
Blackrain

BE_Rogue · 09-07-2006, 05:34 PM

exactly what I wanted thanks.

09-07-2006, 04:28 PM	#1 (permalink)
BE_Rogue Active Member Join Date: Jul 2006 Location: central florida, Polk Posts: 149	semi-pgp Q ram,lpr,3way threads I'ld like to know what the threads for autococker Rams, 3-ways, and LPRs are. I tried matching them up at ACE but nothing seemed 'perfect'. also where to get a spring to use for a stick/spring-feed ? __________________ N.O.'M.A.A.M. #3 My Hungry Feedback Thread.

09-07-2006, 05:34 PM	#4 (permalink)
BE_Rogue Active Member Join Date: Jul 2006 Location: central florida, Polk Posts: 149	exactly what I wanted thanks. __________________ N.O.'M.A.A.M. #3 My Hungry Feedback Thread.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-07-2006, 05:02 PM	#2 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America Posts: 2,855	3 way threads 15/32-32 you need a 15/32 drill bit to make the threaded hole.I had to special order the tap and drill bit. LPR is 1/8 NPT threads use an "S" or "R" drill bit. Hope this helps.

09-07-2006, 05:05 PM	#3 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America Posts: 2,855	This should help you too. http://haveblue.org/tech/autococker/ Later, Blackrain