Custom work needed

wycked54 · 04-08-2008, 05:27 PM

I need a direct feed for a Sheridan and to have it soldered onto an old 68 magnum body. PM me with price and estimated time table.

Any Takers?

kidneythief · 04-08-2008, 06:17 PM

If nobody bits I could do it for you.

My bench is kinda full right now so it would be a bit before I could take it on.

-Jake

chplnstone · 04-12-2008, 01:14 AM

same story as above...

BigOldSkool · 04-12-2008, 01:38 AM

I can make the feed but wont want to do the soldering.. Not my thing..

Smiley · 04-12-2008, 02:55 AM

Is the body empty and clean ? is it bare brass, original finish or painted ?
which type of feed do you want PMI or Palmers ? All these things would factor in to the price. you might also consider selling or trading for a Long Barrel DF body or gun.Do you have the magnum feed block ?

wycked54 · 04-12-2008, 09:09 AM

Quote:

Originally Posted by Smiley

Is the body empty and clean ? is it bare brass, original finish or painted ?
which type of feed do you want PMI or Palmers ? All these things would factor in to the price. you might also consider selling or trading for a Long Barrel DF body or gun.Do you have the magnum feed block ?

The barrel is empty but the valve is still in the lower tube due to a lack of proper tools. The factory paint is stripped but the body is raw (not polished). I don't care about the type of feed just want it on there. I do have the feed block but the last time i played I broke the PVC elbow off. I like the body for some unknown reason and since I got the gun for $5 I don't really want to trade it. I might just rig the block to work I was just looking at prices and time tables to see which route would be the easiest. My off time is limited due to my job. Last week I put in 107 hours over 7 days.

P.S. Chplnstone I have seen some of your work before at My old Job (#1 Paintball) A young man came in from Tenn. I think, and he was very pleased with the work you had done to his 68SC and all of the younger players and a few of the older ones as well were drooling all over it. I think he had to polish it twice.

wycked54 · 04-12-2008, 01:01 PM

After the last post I decided to try and salvage the feed block. So I took a trip to Lowe's.

10 min and $1.97 later I fixed it. Thanks for the help guys.

chplnstone · 04-12-2008, 01:12 PM

looks good, quick and cheap...if you decide to switch to brass for the neck, let me know and i'll send you a piece of valve tube stock, it's the same size pps uses for their feednecks...i'm trying to remember who had a p68sc in Tenn., i don't mess with p68's too often, did it look like this?

wycked54 · 04-12-2008, 11:47 PM

I don't recall exactly where he was from, it was somewhere in the southeast possibly Mississippi. It had a K-frame but he said that you did everything else. That could have been it.

Would the valve tube from a PGP2 work? I have a body sitting around that I gutted all of the parts out of.

chplnstone · 04-13-2008, 12:23 AM

maybe one of these, then...how's the quick fix working? worried the copper might be too soft...
http://i195.photobucket.com/albums/z..._2768_0001.jpg
http://i195.photobucket.com/albums/z...afty/sale6.jpg

04-08-2008, 05:27 PM	#1 (permalink)
wycked54 I Play Wreckball Join Date: Dec 2006 Location: Tomball Texas Posts: 59	Custom work needed I need a direct feed for a Sheridan and to have it soldered onto an old 68 magnum body. PM me with price and estimated time table. Any Takers?

04-08-2008, 06:17 PM	#2 (permalink)
kidneythief Lord humungus the Mod Join Date: Mar 2006 Location: Home Finally!!! Posts: 2,447	If nobody bits I could do it for you. My bench is kinda full right now so it would be a bit before I could take it on. -Jake __________________ "I wish simply to be a decent person, yet I will always fear the retards" -Brian Hindt(geech) "Every man knows he is, basically, a complete sissy compared to Johnny Cash." - Bono LPPC member #24 MCB Moderator Machinist for hire Kidney Machine

04-12-2008, 01:14 AM	#3 (permalink)
chplnstone bringing back the dead Join Date: Jan 2007 Location: pensacola, florida Posts: 884	same story as above... __________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out...

04-12-2008, 01:38 AM	#4 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY Posts: 1,902	I can make the feed but wont want to do the soldering.. Not my thing.. __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" http://www.myspace.com/eastcoastanarchypaintball

04-12-2008, 02:55 AM	#5 (permalink)
Smiley MCB Member Join Date: Oct 2007 Posts: 199	Is the body empty and clean ? is it bare brass, original finish or painted ? which type of feed do you want PMI or Palmers ? All these things would factor in to the price. you might also consider selling or trading for a Long Barrel DF body or gun.Do you have the magnum feed block ? __________________ Things on my WTB list are: Autococker threaded Nelson body Assault Line "L" stock for Nelson or sheridan P series. Send me a PM if you have any of these to sell. My feedback

04-12-2008, 01:01 PM	#7 (permalink)
wycked54 I Play Wreckball Join Date: Dec 2006 Location: Tomball Texas Posts: 59	After the last post I decided to try and salvage the feed block. So I took a trip to Lowe's. 10 min and $1.97 later I fixed it. Thanks for the help guys.

04-12-2008, 01:12 PM	#8 (permalink)
chplnstone bringing back the dead Join Date: Jan 2007 Location: pensacola, florida Posts: 884	looks good, quick and cheap...if you decide to switch to brass for the neck, let me know and i'll send you a piece of valve tube stock, it's the same size pps uses for their feednecks...i'm trying to remember who had a p68sc in Tenn., i don't mess with p68's too often, did it look like this? __________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out...

04-12-2008, 11:47 PM	#9 (permalink)
wycked54 I Play Wreckball Join Date: Dec 2006 Location: Tomball Texas Posts: 59	I don't recall exactly where he was from, it was somewhere in the southeast possibly Mississippi. It had a K-frame but he said that you did everything else. That could have been it. Would the valve tube from a PGP2 work? I have a body sitting around that I gutted all of the parts out of. Last edited by wycked54; 04-13-2008 at 12:39 AM.

04-13-2008, 12:23 AM	#10 (permalink)
chplnstone bringing back the dead Join Date: Jan 2007 Location: pensacola, florida Posts: 884	maybe one of these, then...how's the quick fix working? worried the copper might be too soft... http://i195.photobucket.com/albums/z..._2768_0001.jpg http://i195.photobucket.com/albums/z...afty/sale6.jpg __________________ happy with me? http://www.mcarterbrown.com/forums/f...-feedback.html sales thread: http://www.mcarterbrown.com/forums/r...new-brass.html myspace: http://profile.myspace.com/index.cfm...ndid=106059990 chivalry isn't dead, just taking a long dirt nap... home from california and tired as all get out...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search