Ideas for bodies drilled for eyes. - Page 3

Sly1 · 05-05-2008, 12:17 AM

should have used some neosporin.. cuts recovery time in half

Altec · 05-05-2008, 12:29 AM

You don't get the cool scares though...

Sly1 · 05-05-2008, 01:10 AM

true, I'm more of a "leave the wd 40, and gear grease in the wound" sort of fella.. I figure eventually the scar will look like jesus, and I can sell the digit on ebay for a mint...

pump · 05-05-2008, 03:15 AM

fill in holes with putty, use wet cotton swab to remove excess, and bust out the "Bling it on"

Paintballer50505 · 05-08-2008, 12:39 AM

a quad detent setup would cover all the holes would be one of the more difficult conclusions and pretty unneeded with a closed bolt but why the **** not

jwigum · 05-08-2008, 01:17 AM

I've seen some snipers with name plates in place of eye covers...

Sly1 · 05-08-2008, 01:31 AM

you could just put a gaping hole there also.. like a 1/4 in..

Cunha · 05-08-2008, 01:50 AM

Weld it shut. Thread in a detent in the right spot. The little spot remaining if anything will be barely noticable. Re anodize and it will be like it was never there.

Sly1 · 05-08-2008, 01:53 AM

except, I'm pretty sure the heat would either distort the tube, or it wouldn't weld because of the annodized surface, or It would annodize a different color because of heat dispersion.

alpha434 · 05-08-2008, 05:20 PM

The idea for making the eyes into another detent would not work.

They would keep the balls from feeding.

I REALLY like the japanese sword decorations. I might just put that to use...

EDIT: Also, heat dispersion doesn't affect annodizing. But reannoing a part and annoing a virgin part (the weld spot) will come out slightly different. This all depends on who's doing the annodizing and who is doing the prep work.

05-05-2008, 12:17 AM	#21 (permalink)
Sly1 Post Whore Join Date: May 2007 Location: Oregon Posts: 1,110	should have used some neosporin.. cuts recovery time in half __________________ Boom Feedback-

05-05-2008, 12:29 AM	#22 (permalink)
Altec Active Member Join Date: Oct 2006 Location: Maryland Posts: 445	You don't get the cool scares though... __________________ PROJECT'S Confederate Ballers! -Official Avatar Maker-

05-05-2008, 01:10 AM	#23 (permalink)
Sly1 Post Whore Join Date: May 2007 Location: Oregon Posts: 1,110	true, I'm more of a "leave the wd 40, and gear grease in the wound" sort of fella.. I figure eventually the scar will look like jesus, and I can sell the digit on ebay for a mint... __________________ Boom Feedback-

05-05-2008, 03:15 AM	#24 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp Posts: 611	fill in holes with putty, use wet cotton swab to remove excess, and bust out the "Bling it on" __________________ Hawaiipb.com Hawaii's Paintball forum NIB Warp Feeds FS Autotriggers for Sliders and Dye Pivots FS

05-08-2008, 01:31 AM	#27 (permalink)
Sly1 Post Whore Join Date: May 2007 Location: Oregon Posts: 1,110	you could just put a gaping hole there also.. like a 1/4 in.. __________________ Boom Feedback-

05-08-2008, 12:39 AM	#25 (permalink)
Paintballer50505 Active Member Join Date: Jul 2007 Location: New Jersey Posts: 148	a quad detent setup would cover all the holes would be one of the more difficult conclusions and pretty unneeded with a closed bolt but why the **** not

05-08-2008, 01:17 AM	#26 (permalink)
jwigum MCB Member Join Date: Apr 2006 Posts: 343	I've seen some snipers with name plates in place of eye covers...

05-08-2008, 01:50 AM	#28 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA Posts: 4,016	Weld it shut. Thread in a detent in the right spot. The little spot remaining if anything will be barely noticable. Re anodize and it will be like it was never there. __________________ If you're not moving, there is no movement. Some small things for sale.

05-08-2008, 01:53 AM	#29 (permalink)
Sly1 Post Whore Join Date: May 2007 Location: Oregon Posts: 1,110	except, I'm pretty sure the heat would either distort the tube, or it wouldn't weld because of the annodized surface, or It would annodize a different color because of heat dispersion. __________________ Boom Feedback-

05-08-2008, 05:20 PM	#30 (permalink)
alpha434 Rec Poster Join Date: May 2008 Location: Denver, CO Posts: 74	The idea for making the eyes into another detent would not work. They would keep the balls from feeding. I REALLY like the japanese sword decorations. I might just put that to use... EDIT: Also, heat dispersion doesn't affect annodizing. But reannoing a part and annoing a virgin part (the weld spot) will come out slightly different. This all depends on who's doing the annodizing and who is doing the prep work.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search