mq`ed m98 custom ?

dauntless15 · 05-31-2008, 10:31 PM

is it possable ? iv been thinking about it and its totaly possable . i know that didint make sense . but i dont know enuf about it to make a final desision . i mean if you put one vertical froma cocker and build a custom bracket and cut a tippmann valve in half and then mount the mq valve being it . theres just no way that i can think of to move the bolt back anfd forth . any ideas? lets keep this civil , no flaming

i was thinking about makeing a bolt like an automag . or the deadlywind adedas or what ever for the thing is called . but that means i whould have to make a new breach with the sruing to return the bolt . i could put a ram on the side of the gun maybey that whould be good .

ravenlord · 05-31-2008, 11:24 PM

you would pretty much have to redesign the entire gun. It is possible, but a lot more effort then it is worth.

dauntless15 · 05-31-2008, 11:32 PM

well the gun can get shortend cuz there will be no hammer . and the vlave will be in halve

dauntless15 · 06-01-2008, 12:25 AM

whould anyone want to make a donation to this prodject? i need some ccker rams and an mq vlave and a e1 grip or a e2 and one of the electronic 3 ways or what ever is on the elelctronic cockers? anyone lol jk

pizzaluvr · 06-01-2008, 12:29 AM

I wouldn't make a donation to someone who can't spell the things they're working on...

mayor · 06-01-2008, 01:16 AM

so your basically saying "anyone wanna gimma $300?"

unreal

dauntless15 · 06-01-2008, 09:16 AM

oh im sorry . i got a new apple keybord and its taking getting used to .
and for you meat head who did not read the end of that post where i was asking for donations . the end says L O L JK now imo this means ( just joking ) if you want to be a complete moron and act like your all that then get out of my thread . but if you want to give me some insight on how to go about doing this project then by all means say it . and it says no flaming .

pizzaluvr · 06-01-2008, 01:00 PM

Ok.. Well the easiest way would be to use a cocker ram to cycle the bolt. Use an eblade solenoid and a universal t-board. I'm not sure if the double solenoid one is out yet, but if it is that's what you'd need.

dauntless15 · 06-01-2008, 01:02 PM

i thought of that but then whouldent i need the e1 or e2 grip with the planet eclipse 3 or 4o way ? where whould i mount that ? and how whould i build a mq in to the valve housieng . has this ever been done before?

pizzaluvr · 06-01-2008, 01:29 PM

No I don't think it has. I'm fairly sure the MQ outputs on the top, so that's one more hurdle to get around.

05-31-2008, 10:31 PM	#1 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	mq`ed m98 custom ? is it possable ? iv been thinking about it and its totaly possable . i know that didint make sense . but i dont know enuf about it to make a final desision . i mean if you put one vertical froma cocker and build a custom bracket and cut a tippmann valve in half and then mount the mq valve being it . theres just no way that i can think of to move the bolt back anfd forth . any ideas? lets keep this civil , no flaming i was thinking about makeing a bolt like an automag . or the deadlywind adedas or what ever for the thing is called . but that means i whould have to make a new breach with the sruing to return the bolt . i could put a ram on the side of the gun maybey that whould be good . Last edited by dauntless15; 05-31-2008 at 11:02 PM.

06-01-2008, 12:29 AM	#5 (permalink)
pizzaluvr Nazi-Treasure Hunter Join Date: Jun 2007 Location: Arkansas Posts: 2,834	I wouldn't make a donation to someone who can't spell the things they're working on... __________________ MCB Feedback +26/-0 PBN Feedback +2/-0 Rapper LE 14/25 OC/SC Feed-Side Car-CP barrel-Sniper-Mini-Midget-Halfblock I ball for Team Fracture

06-01-2008, 01:00 PM	#8 (permalink)
pizzaluvr Nazi-Treasure Hunter Join Date: Jun 2007 Location: Arkansas Posts: 2,834	Ok.. Well the easiest way would be to use a cocker ram to cycle the bolt. Use an eblade solenoid and a universal t-board. I'm not sure if the double solenoid one is out yet, but if it is that's what you'd need. __________________ MCB Feedback +26/-0 PBN Feedback +2/-0 Rapper LE 14/25 OC/SC Feed-Side Car-CP barrel-Sniper-Mini-Midget-Halfblock I ball for Team Fracture Last edited by pizzaluvr; 06-01-2008 at 01:28 PM.

06-01-2008, 01:29 PM	#10 (permalink)
pizzaluvr Nazi-Treasure Hunter Join Date: Jun 2007 Location: Arkansas Posts: 2,834	No I don't think it has. I'm fairly sure the MQ outputs on the top, so that's one more hurdle to get around. __________________ MCB Feedback +26/-0 PBN Feedback +2/-0 Rapper LE 14/25 OC/SC Feed-Side Car-CP barrel-Sniper-Mini-Midget-Halfblock I ball for Team Fracture

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-31-2008, 11:24 PM	#2 (permalink)
ravenlord Rec Poster Join Date: Jan 2008 Posts: 80	you would pretty much have to redesign the entire gun. It is possible, but a lot more effort then it is worth.

05-31-2008, 11:32 PM	#3 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	well the gun can get shortend cuz there will be no hammer . and the vlave will be in halve

06-01-2008, 12:25 AM	#4 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	whould anyone want to make a donation to this prodject? i need some ccker rams and an mq vlave and a e1 grip or a e2 and one of the electronic 3 ways or what ever is on the elelctronic cockers? anyone lol jk

06-01-2008, 01:16 AM	#6 (permalink)
mayor Active Member Join Date: Sep 2007 Location: Hawaii Posts: 225	so your basically saying "anyone wanna gimma $300?" unreal

06-01-2008, 09:16 AM	#7 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	oh im sorry . i got a new apple keybord and its taking getting used to . and for you meat head who did not read the end of that post where i was asking for donations . the end says L O L JK now imo this means ( just joking ) if you want to be a complete moron and act like your all that then get out of my thread . but if you want to give me some insight on how to go about doing this project then by all means say it . and it says no flaming .

06-01-2008, 01:02 PM	#9 (permalink)
dauntless15 Active Member Join Date: Sep 2007 Location: wyckoff nj Posts: 376	i thought of that but then whouldent i need the e1 or e2 grip with the planet eclipse 3 or 4o way ? where whould i mount that ? and how whould i build a mq in to the valve housieng . has this ever been done before?