Pmi-II getting pimped(not completed)

BenoitOWN · 06-25-2008, 09:38 PM

From this:

To this!!!:

So this is my Sheridan Pmi-II. It not completed yet but it almost. Waiting on a package from Tidus that I bought today and a special order from Noxx55 that is not completed yet. And a piece from tunamart that I placed my order today(That included other part toward other project).

There is a chance that the Cooper-T bolt aluminium get changed to a Cooper-T delrin bolt.

For now with a 12grams it seem I can do about 18-20 good shot per 12 grams but can do up to around 30. I don't know if it had a palmer work on the valve.

Tell me what you think guy.

Titus · 06-25-2008, 09:54 PM

Looks good so far, the APP hopper is now in Canada, wow that got alot of miles on it quickly.

Where's the pump handle?

BenoitOWN · 06-25-2008, 09:57 PM

Quote:

Originally Posted by Titus

Where's the pump handle?

Noxx55 got that part but for now it a bolt action since I sold all of my pump handle.

Marbo40k · 06-27-2008, 05:09 PM

Nice grips. Did you make those? What kind of wood are they?

BenoitOWN · 08-07-2008, 12:21 AM

Talked with him and: Pump handle will be refunded and I will look at another kind of pump handle in wood. The dummy will be replaced. I will keep the loudner.

Now next: rainman229 and Palmer

A.C. Basbas · 08-07-2008, 12:25 AM

Quote:

Originally Posted by BenoitOWN

http://img359.imageshack.us/img359/1961/dsc01035uc5.jpg

This is kinda an update, pump handle, loudner and the dummy adapter will get back to the sender and I requested a refund via pm. Burs all over the 2 parts I said, ruff inside and burs on the dummy adapter air hole for fitting. I tryed to get it out but it didn't fix the fitting.

I mean those parts would not even pass the quality control test at my previous school in the machinist department.

Dissapointed

Considered a wood pump at all? Theres some guy with a lathe looking for ideas currently... Matching the grips would look cool.

Also, Noxx55s loudeners get

from everyone. Definately worth the cash.

BenoitOWN · 08-07-2008, 12:29 AM

Already contacted someone for a wood pump handle.

For the loudner I will give it a try but I dislike the inside finish

BenoitOWN · 09-15-2008, 09:01 PM

Updated!!

Railgun · 09-15-2008, 11:23 PM

I lust after your lever changer...

Good choice on going with a wood pump handle. I trust it'll be done in the same wood as the grips? Anything less would be gauche ! ! ! ! ! !

And no need for a lathe owner unless you're truly after a round section pump handle. It's easy to make it more of a "duckslide" style with flat sides.

BenoitOWN · 09-15-2008, 11:34 PM

Mcb member jakeman7676 is making my woods handle in the same woods than my grip.

06-25-2008, 09:38 PM	#1 (permalink)
BenoitOWN Paintball Fox Join Date: Oct 2006 Location: Canada, QC Posts: 666	Pmi-II getting pimped(not completed) From this: To this!!!: So this is my Sheridan Pmi-II. It not completed yet but it almost. Waiting on a package from Tidus that I bought today and a special order from Noxx55 that is not completed yet. And a piece from tunamart that I placed my order today(That included other part toward other project). There is a chance that the Cooper-T bolt aluminium get changed to a Cooper-T delrin bolt. For now with a 12grams it seem I can do about 18-20 good shot per 12 grams but can do up to around 30. I don't know if it had a palmer work on the valve. Tell me what you think guy. Last edited by BenoitOWN; 06-25-2008 at 09:47 PM.

06-25-2008, 09:54 PM	#2 (permalink)
Titus Sunstar Paramedics Slave Join Date: Mar 2006 Location: The Group W Bench Posts: 7,773	Looks good so far, the APP hopper is now in Canada, wow that got alot of miles on it quickly. Where's the pump handle? __________________ Celani's Paintball Dealer for APP, CCI, Tippmann, JCS, etc Feedback Willing to be a 3rd party for shipments to Canada and outside of the US, just PM me.

06-27-2008, 05:09 PM	#4 (permalink)
Marbo40k Rec Poster Join Date: Oct 2007 Location: Oregon Posts: 84	Nice grips. Did you make those? What kind of wood are they? __________________

08-07-2008, 12:21 AM	#5 (permalink)
BenoitOWN Paintball Fox Join Date: Oct 2006 Location: Canada, QC Posts: 666	Talked with him and: Pump handle will be refunded and I will look at another kind of pump handle in wood. The dummy will be replaced. I will keep the loudner. Now next: rainman229 and Palmer Last edited by BenoitOWN; 08-07-2008 at 01:04 PM.

08-07-2008, 12:29 AM	#7 (permalink)
BenoitOWN Paintball Fox Join Date: Oct 2006 Location: Canada, QC Posts: 666	Already contacted someone for a wood pump handle. For the loudner I will give it a try but I dislike the inside finish Last edited by BenoitOWN; 08-07-2008 at 12:54 AM.

09-15-2008, 09:01 PM	#8 (permalink)
BenoitOWN Paintball Fox Join Date: Oct 2006 Location: Canada, QC Posts: 666	Updated!!

09-15-2008, 11:23 PM	#9 (permalink)
Railgun MCB Member Join Date: Oct 2006 Posts: 2,343	I lust after your lever changer... Good choice on going with a wood pump handle. I trust it'll be done in the same wood as the grips? Anything less would be gauche ! ! ! ! ! ! And no need for a lathe owner unless you're truly after a round section pump handle. It's easy to make it more of a "duckslide" style with flat sides. __________________ Witty saying to be plagarized soon.....

09-15-2008, 11:34 PM	#10 (permalink)
BenoitOWN Paintball Fox Join Date: Oct 2006 Location: Canada, QC Posts: 666	Mcb member jakeman7676 is making my woods handle in the same woods than my grip.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search