Custom

[pump]

but then if your saying its an improvement then its evident you never worked on them properly

[Chaos]

Originally Posted by pump

but then if your saying its an improvement then its evident you never worked on them properly

I am a very experienced gun tech as many around this site can tell you and I've found the stock B2K to be lacking in quality and have see too many issues with them.Personally seeing someone making a pump gun out of this is a huge improvement (and it's cool to see someone doing something like this and not doing a hack job on it) and that is my opinon which I am intitled to.Comments such as yours are uncalled for and I'm not going to start up an arguement here...if you want to discuss this PM me.

[pump]

if you wanted this in the PMs you should of never posted this in the thread, and almost every gun stock at 400 has issues


but yes for now ill leave this be

[K_Obeastly]

so the velocity adjuster is the LPR tightening the valve spring?

The old LPR is now in the rear and it adjusts the hammer/main spring by moving the carrier (white delrin piece) backwards or forwards. It is basically a sheridan style gun w/ a redesigned hammer.

as for the quality of bushies, they do have some issues. Most of the issues are personal preferance but there are some real problems as well. The biggest one I see is the bore size of the top tube. It seems vary a bit from gun to gun. The wiring is also rather crappy. One of the things I have seen that earned them a crappy reputation was sending out guns w/o tuning the regs. I've seen multiple occasions where a kid gets a new bushy and ends up sitting in the staging area for an hour or more thinking his brand new gun is crap because the regs weren't adjusted right. Once I realize there is a problem I usually go help them out but I'm sure there are others that go through the same issues w/o anyone around to help them.