mcarterbrown.com  

Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!

Reply
 
Thread Tools Search this Thread
Old 07-27-2008, 01:56 AM   #11 (permalink)
Inch of Gold
 
Mayvik's Avatar
 
Join Date: May 2007
Location: Denver

Fan of EMR
CCM Fan
Brass and Wood Fan
PPS Fan
NP..def post up if you have any Qs on these restorations. Getting them working isn't that hard, getting them pretty...well that's another story

BTW, do you have a Sheridan valve tool? You may or may not need to pop your valve guts out.
__________________
My Feedback
Mayvik is offline   Reply With Quote
Old 07-27-2008, 02:35 AM   #12 (permalink)
Post Whore
 
blackrain's Avatar
 
Join Date: Apr 2006
Location: America
Send a message via AIM to blackrain

right here.
Blackrain's project page -> Pirhana SB
Everything gets stripped and cleaned.
Later,
Blackrain
blackrain is offline   Reply With Quote
Old 07-27-2008, 10:50 AM   #13 (permalink)
Post Whore
 
Legion's Avatar
 
Join Date: Jul 2006
Location: Woods Cross, Utah

nice

I like the organisation of your web page. quite a project but you are sure to be happy with the end result and adding another marker to your collection is always fun.
__________________
Quote:
"You Legion, it's Mar! ... YEah, from MCB... SO, watch'a wearing? I'm in the bath right now..."
You can also reach me at bgpaintball@gmail.com or on facebook...Derek Jones
Visit my new group page at http://www.facebook.com/JonesGunWorks#!/JonesGunWorks
http://www.youtube.com/user/Legion99999?feature=mhee
Legion is offline   Reply With Quote
Old 07-27-2008, 03:00 PM   #14 (permalink)
Post Whore
 
blackrain's Avatar
 
Join Date: Apr 2006
Location: America
Send a message via AIM to blackrain

Thanks Legion. It's just a dump place where I put everything. Seems like alot of folks visit,but don't leave comments lol.
Later,
Blackrain
blackrain is offline   Reply With Quote
Old 07-27-2008, 04:04 PM   #15 (permalink)
1320
 
Altec's Avatar
 
Join Date: Oct 2006
Location: MD

Quote:
Originally Posted by blackrain View Post
Thanks Legion. It's just a dump place where I put everything. Seems like alot of folks visit,but don't leave comments lol.
Later,
Blackrain
I have mine setup so people can't post lol. I also use mine as a place to post projects, and stuff.
__________________

BEO Mafia
Altec is offline   Reply With Quote
Old 08-04-2008, 02:34 PM   #16 (permalink)
Post Whore
 
blackrain's Avatar
 
Join Date: Apr 2006
Location: America
Send a message via AIM to blackrain

I didn't take before pictures,because you can see what it looked like prior to receiving it. I have begun cleaning this project. I have noticed a few things wrong. The front of my barrel is not round. I'll have to either make some plugs to round it back out or just remove that small section of barrel. Looks like I will need to file as well. I have some raised metal on the tip. The body is stripped and polished. I was able to remove all markings of SNY and the rental number. The palmer flash suppressor will not fit at the monment due to the oblonged tip. So the barrel repair is the next step of repair. All and all it wasn't really that bad. The frame internals were so mucked with paint that the trigger would not even pull lol. Bolt seems to be in decent shape. I polished the hammer,but it still needs a little more work.
Later,
Blackrain

A few progression pics. All the paint and Markings have been removed. So armed with my chop saw and belt/disc sander,I chopped the barrel tip and now it's perfect. Just took about 3/16 off. Did a little filing inside and out. Fit the Palmer Flash hinder so well I can't get it off now lol.
Later,
Blackrain

blackrain is offline   Reply With Quote
Old 08-04-2008, 04:00 PM   #17 (permalink)
Post Whore
 
blackrain's Avatar
 
Join Date: Apr 2006
Location: America
Send a message via AIM to blackrain

Thank GOD for hot water. I was able to heat it in the correct area and remove it. You can see what a nice barrel chop I did. Like I said only took about 3/16 off. Also a top view so you can see the numbers and field marking are gone.
Later,
Blackrain



Last edited by blackrain; 08-04-2008 at 05:12 PM.
blackrain is offline   Reply With Quote
Old 08-04-2008, 04:24 PM   #18 (permalink)
Red=Moderator
 
Schmitti's Avatar
 
Join Date: Apr 2006
Location: Albany. NY

I had to take the pipe cutter to my beater sb also when I got it (just about trimmed off the same amount too). That's the problem with brass... it's just soft enough that some misuse will give it a good ding.

Looking nice so far!

E
Schmitti is offline   Reply With Quote
Old 08-04-2008, 04:38 PM   #19 (permalink)
Post Whore
 
blackrain's Avatar
 
Join Date: Apr 2006
Location: America
Send a message via AIM to blackrain

I was able to keep the site hole so that was a plus. Saved myself about $40.00 doing the repair. I still have to clean up the inside. I'll get some bottle brushes this week. The inside of the top tube will be ready for some Never Dull or Brasso. The brass took well to the ruff grit sand paper I used to remove the markings and numbers. It was about 30 mins of work between sanding and buffing.
Later,
Blackrain

Last edited by blackrain; 08-04-2008 at 04:46 PM.
blackrain is offline   Reply With Quote
Old 08-04-2008, 04:51 PM   #20 (permalink)
Post Whore
 
blackrain's Avatar
 
Join Date: Apr 2006
Location: America
Send a message via AIM to blackrain

I'm only out a barrel condom so far. I traded a member for a lower front cap. I could have made one,but I wanted all originol as possible.
Later,
Blackrain

Last edited by blackrain; 08-04-2008 at 05:34 PM.
blackrain is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Custom Projects / Custom Questions

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 06:36 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC