mcarterbrown.com  

Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!

Reply
 
Thread Tools Search this Thread
Old 11-28-2008, 11:03 PM   #1 (permalink)
is in the left gate...
 
jwigum's Avatar
 
Join Date: Apr 2006
Send a message via AIM to jwigum

Blazer 2k/Pyre barrel turning spec

So, blazer barrel length and OD are shown in the picture below, but it doesn't note the OD of the bolt, and how far it goes into the barrel. I know that if you're getting an insert kit turned for a Blazer(or Pyre), the bolt needs to be accounted for at the start of the insert.


Anyone know the OD of the bolt, and the distance it enters the barrel? What's the recommended ID of the bolt area, and how far does it need to extend into the barrel?

Is the Pyre exactly the same as the 2K barrel spec?
__________________
Quote:
Originally Posted by Mayvik
My town is more impoverished and poorly maintained than yours, and my neighbors have endured greater hardship. Now let us resort to fisticuffs!
Quote:
Originally Posted by advantagepb=virtue
To turn ramping off at anytime, simply tap the power button, or hold the trigger for 2 seconds. There is no indicator to show when ramping is shut off.

Also, if the marker is not fired for 90 seconds,
ramping is turned off.
jwigum is offline   Reply With Quote
Old 11-28-2008, 11:28 PM   #2 (permalink)
MCB Member
 
freedom's Avatar
 
Join Date: Apr 2006
Location: jerzzeeee shore!

i have a .685 barrel and if i push it all the way in, it catches the bolt on my 2k blazer.
first time i used that barrel, it took me a minute to figure out why my blazer didn't want to shoot...
__________________
'The only thing necessary for the triumph of evil is for good men to do nothing.' - Edmund Burke

past & present http://www.freewebs.com/non-inflammable/

my feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

Barack Hussein Obama = Biggest Fraud Ever Perpetrated Upon the American People

freedom is offline   Reply With Quote
Old 11-29-2008, 01:55 PM   #3 (permalink)
GWC Lifetime Member
 
Al Ray's Avatar
 
Join Date: Mar 2006
Location: Grand Junction, Colorado

Yeah I purchased an AC barrel adaptor from palmers and the bolt constantly stuck up. First I took care of the inside edge of the adaptor, why it was left blunt and not rheemed is beyond me, you would think they would pay more attention to that. Also ditched the front delron "O-ring" in favor of a standard one. Thing works fine now.
Al Ray is offline   Reply With Quote
Old 11-30-2008, 02:50 AM   #4 (permalink)
is in the left gate...
 
jwigum's Avatar
 
Join Date: Apr 2006
Send a message via AIM to jwigum

Thanks much guys. I'm looking to get good figures so I can have an SM kit turned down for one.
__________________
Quote:
Originally Posted by Mayvik
My town is more impoverished and poorly maintained than yours, and my neighbors have endured greater hardship. Now let us resort to fisticuffs!
Quote:
Originally Posted by advantagepb=virtue
To turn ramping off at anytime, simply tap the power button, or hold the trigger for 2 seconds. There is no indicator to show when ramping is shut off.

Also, if the marker is not fired for 90 seconds,
ramping is turned off.
jwigum is offline   Reply With Quote
Old 12-02-2008, 12:20 AM   #5 (permalink)
is in the left gate...
 
jwigum's Avatar
 
Join Date: Apr 2006
Send a message via AIM to jwigum

I called PPS today, and they said the bolt enters the barrel for 3/8 of an inch.
__________________
Quote:
Originally Posted by Mayvik
My town is more impoverished and poorly maintained than yours, and my neighbors have endured greater hardship. Now let us resort to fisticuffs!
Quote:
Originally Posted by advantagepb=virtue
To turn ramping off at anytime, simply tap the power button, or hold the trigger for 2 seconds. There is no indicator to show when ramping is shut off.

Also, if the marker is not fired for 90 seconds,
ramping is turned off.
jwigum is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Custom Projects / Custom Questions

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 03:01 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC