threshold blues/help!

Rockytop · 03-04-2011, 09:00 PM

Hey hey,I have a nice threshy,but it has developed a non working problem recently. When turned on and gased up it will not cycle when trigger is pulled,all it does is make a pfft.sound and air escapes inside the grip frame not from barrel.I have changed battery, inspected o-rings and relubed them.im at a loss as what to check next.any ideas would be appreciated, thanks

Disorderly Conduct · 03-05-2011, 09:12 AM

First don't over lube these markers get bolt stick easily a small amount of lube works wonders next check your reg make sure your input pressure didn't creep up, too much pressure will cause noid not to cycle. If input pressure is fine the noid in all DP guns are user serviceable there are several vids on you tube on how to service the noid it has the same one as the G3 G4 Spec-r and Rev-I if that doesn't work contact dp i hope this helps

03-04-2011, 09:00 PM	#1 (permalink)
Rockytop Rec Poster Join Date: Nov 2010	threshold blues/help! Hey hey,I have a nice threshy,but it has developed a non working problem recently. When turned on and gased up it will not cycle when trigger is pulled,all it does is make a pfft.sound and air escapes inside the grip frame not from barrel.I have changed battery, inspected o-rings and relubed them.im at a loss as what to check next.any ideas would be appreciated, thanks

03-05-2011, 09:12 AM	#2 (permalink)
Disorderly Conduct Newbie Join Date: Sep 2010	threshy issues First don't over lube these markers get bolt stick easily a small amount of lube works wonders next check your reg make sure your input pressure didn't creep up, too much pressure will cause noid not to cycle. If input pressure is fine the noid in all DP guns are user serviceable there are several vids on you tube on how to service the noid it has the same one as the G3 G4 Spec-r and Rev-I if that doesn't work contact dp i hope this helps

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search