mcarterbrown.com  

The Dead Zone Paintball Related Chat

Reply
 
Thread Tools Search this Thread
Old 06-18-2011, 09:35 PM   #1 (permalink)
OnTarget Photography
 
jtusa181's Avatar
 
Join Date: Feb 2010
Location: FL

CCM Fan
Azodin Kaos-D major problem

So since there is no Azodin Armory section........

So went to use my Kaos-D today and noticed a very slight leak in the breach. Waved it off as a oring probably and used another gun today. Well, just got around to tinkering with it. Took it all apart and all orings look perfectly fine. So threw some oil on them. Aired it up, still had the breach leak. Took one shot, it emptied all 1,500psi in my tank in under 10 seconds.....yeah....help?

-Dalton
jtusa181 is offline   Reply With Quote
Old 06-18-2011, 10:03 PM   #2 (permalink)
Marq's Man
 
Algae's Avatar
 
Join Date: Oct 2010

Sounds like it could be the valve. Maybe the Zero system isn't resetting the poppit like it should?
__________________
I want to buy a Sydarm!

Algae's B/S/T Feedback:
http://www.mcarterbrown.com/forums/f...-feedback.html
Algae is offline   Reply With Quote
Old 06-19-2011, 12:33 PM   #3 (permalink)
on temporary hiatus
 
usagi_tetsu's Avatar
 
Join Date: Aug 2006
Location: Columbia/Jeff City, MO

Or the cup seal on the valve isn't seating properly. Clean it real good, don't oil it real heavily, and dry fire it 10 to 15 times, see if that doesn't work for you.
__________________
Want to improve your game? The best thing to buy is more paint and more field fees.

I can't dumb it down to your level because I'm scared of heights.

A shark is an animal that dies if it stops moving.

My feedback
usagi_tetsu is offline   Reply With Quote
Old 06-20-2011, 12:15 AM   #4 (permalink)
OnTarget Photography
 
jtusa181's Avatar
 
Join Date: Feb 2010
Location: FL

CCM Fan
Did put a thin layer of oil on the orings and dry fired w/out air. Took it apart again, thinking maybe the orings got blown out after pushing out that much air, but, looked fine still. Guess ill have to give in and get a oring kit and replace them and see. Im at a loss otherwise what it could be.
jtusa181 is offline   Reply With Quote
Old 06-20-2011, 12:58 AM   #5 (permalink)
MCB Member
 
Fubarius's Avatar
 
Join Date: Apr 2006
Location: New Richmond, WI
Send a message via AIM to Fubarius Send a message via Yahoo to Fubarius

AKA Fan
Brass N Wood Fan
Palmers Fan
What pressure are you running at? Those balanced valves are usually setup to run at a pretty low pressure and tend to do odd things when over pressured.

I haven't had much experience with the Azodin regulators, but the Spyder VS2 had a similar valve (though a different layout, balanced at the front of the valve pin instead of at the back), and had really crappy regulators. Most of the issues with those were fixed by putting a better reg on the thing.
__________________
David Johnson
aka Fubarius

000110 200 11202 10 000020
012211 021 22110 22 121101
222001 222 10220 00 022212
Fubarius is offline   Reply With Quote
Old 06-20-2011, 01:03 AM   #6 (permalink)
OnTarget Photography
 
jtusa181's Avatar
 
Join Date: Feb 2010
Location: FL

CCM Fan
Put my CP on it, no difference.
jtusa181 is offline   Reply With Quote
Old 06-20-2011, 12:30 PM   #7 (permalink)
Howdy!
 
Chubs's Avatar
 
Join Date: Jul 2010
Location: Austin, TX

CCM Fan
Brass N Wood Fan
Palmers Fan
RTP Fan
I've never fixed a Kaos-D, but I have worked with a few of their other guns. The valves can be touchy, like Fubarius said. I usually replace both the valve body orings, clean the bottom edge of the poppet that contacts the valve body and then put some tri-flo on it. Usually helps.
__________________

Metadyne: Replacing broken parts, with NEW broken parts so you still can't use your new gun.
Quote:
Originally Posted by PistolRogue View Post
Redheads, brass, and wood; it's an MCB thing....
MY FEEDBACK
Chubs is offline   Reply With Quote
Old 06-20-2011, 01:08 PM   #8 (permalink)
Wookie D*ck
 
russc's Avatar
 
Join Date: Apr 2006
Location: Vancouver, BC

Quote:
Originally Posted by Algae View Post
Sounds like it could be the valve. Maybe the Zero system isn't resetting the poppit like it should?
Did Azodin actually name part of their gun the Zero System? Nerds.

__________________
Quote:
Originally Posted by agentSmith View Post
oldschool play is about sportsmanship and respect, oldschool gear is available on Ebay.
russc is offline   Reply With Quote
Old 06-21-2011, 01:58 PM   #9 (permalink)
OnTarget Photography
 
jtusa181's Avatar
 
Join Date: Feb 2010
Location: FL

CCM Fan
Just got off the phone with an Azodin tech. Turned the zero spring in 3 turns, good to go. He said that he wasnt really sure why it happened. Said it usually only happens when someone mods the spring or using co2, neither of which I did. But fixed now
jtusa181 is offline   Reply With Quote
Old 07-13-2011, 01:33 PM   #10 (permalink)
Newbie
 
Join Date: Jul 2011

Same thing happened to me

So on the back of the gun where you adjust the FPS the gun shoots at, you tighten the outside of it, or the inner circle thing? Sorry im kinda new to this gun :P
Dadcuch is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Dead Zone

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 06:23 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC