mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   The Dead Zone (http://www.mcarterbrown.com/forums/dead-zone/)
-   -   The Best "Stock Gun"? (http://www.mcarterbrown.com/forums/dead-zone/168942-best-stock-gun.html)

Kermit 07-15-2011 12:35 PM

The Best "Stock Gun"?
 
So as I was trying to fall asleep last night I had the thought, "What marker has the best stock parts?" so I'm going to ask MCB what their thoughts are. Most parts are all nearly on par, but I'd like to see everyone's opinions. These parts MUST come off of a stock marker, can't be aftermarket add-ons.

Barrel:
Reg(s):
ASA:
Trigger:
Feedneck:
Board:

I'll go first.


Barrel: Either the Phantom or Eclipse
Reg(s): Palmers or Eclipse
ASA: Eclipse POPS
Trigger: Eclipse Ego/Geo or newer Bob Long's for electro. SFL triger for mech.
Trigger Frame: CCI .45
Feedneck: Eclipse DEFTEK Offset feed
Board: Probably Eclipse

I can see why Ego's are so popular :p

russc 07-15-2011 12:38 PM

Quote:

Originally Posted by bigballa (Post 1918661)
Trigger Frame: CCI .45

The CCI .45 frame is a pretty bad frame in my opinion. The bottomline angle is annoying unless you are using stock CCI accessories. The grip panel screw placement puts actual 1911 grips way too low relative to the trigger. The trigger itself is kicked way forward of the rest of the hand. overall, it's an ergonomic nightmare. The CZ 75 grip from CCM completely changes that frame.

BigOldSkool 07-15-2011 12:39 PM

Bob's G6r.

It comes with a .685 barrel stock and already runs an aftermarket board.

Most people that I know that shoot them really stick a hopper and tank on it and go.

Crimson Death 07-15-2011 12:39 PM

DSG

Kermit 07-15-2011 12:46 PM

Quote:

Originally Posted by russc (Post 1918670)
The CCI .45 frame is a pretty bad frame in my opinion. The bottomline angle is annoying unless you are using stock CCI accessories. The grip panel screw placement puts actual 1911 grips way too low relative to the trigger. The trigger itself is kicked way forward of the rest of the hand. overall, it's an ergonomic nightmare. The CZ 75 grip from CCM completely changes that frame.

I was coming from an ergonomic standpoint, in which I found the frame to be VERY comfortable. I've got huge hands and I like small frames, it just fits.

noclue119 07-15-2011 12:47 PM

Quote:

Originally Posted by BigOldSkool (Post 1918672)
Bob's G6r.

It comes with a .685 barrel stock and already runs an aftermarket board.

Most people that I know that shoot them really stick a hopper and tank on it and go.

they give u a 1 piece barrel that a lot of the people won't use

alpha434 07-15-2011 12:47 PM

Quote:

Originally Posted by crimson death (Post 1918674)
dsg

:rotfl:

Deuce 07-15-2011 12:55 PM

Are you talking guns currently in production or still available?

I would say an AKA gun could fit many of the categories.

BigOldSkool 07-15-2011 12:59 PM

Quote:

Originally Posted by noclue119 (Post 1918681)
they give u a 1 piece barrel that a lot of the people won't use

Ever shoot a one piece barrel?

I wish more companies would make them again two pieces SUCK! I might as well be shooting an 6 inch barrel with a 8 inch muzzle break.

Kermit 07-15-2011 02:29 PM

Yeah any gun made


All times are GMT -4. The time now is 02:28 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC