|The Dead Zone Paintball Related Chat|
| ||LinkBack||Thread Tools||Search this Thread|
|09-18-2012, 03:07 PM||#11 (permalink)|
Well the 2000psi one is likely a ninja reg, the bottle I dont think it is theirs.
Only gun that could use 2000psi is a mag.
Currently a dealer for:
Bob Long / Goblin / Rap4 / Ninja Paintball / CCFC And Avratech patch / Alumagrips / TechT
PaintballGear / Ansgear
I am sponsored by(2010):
Point Of View Cameras - For your helmet camera needs
|09-23-2012, 09:04 PM||#12 (permalink)|
Trails Of Doom
Join Date: Aug 2011
Location: Oxford, Ohio
Got my compressed air tank back from it's re-hydro testing and took it to get it filled at the paintball field right down the street from my house... And the reg was leaking...
So I took that apart and replaced the o-rings that were bad... Then I figured I might as well see if the air pump would work.
It does, and in 5 minutes we had put in 500 psi! Pumping it by hand with the high pressure air pump! Pretty cool!
These air pumps only go to 3,600 psi, but my tank is a 3,000 anyway, so it is good for my needs, as I wanted one for testing purposes. So keep your eyes out for these pumps if you want to fill yours at home.
|09-23-2012, 11:51 PM||#13 (permalink)|
Heh, 30 minutes to get a 3000 PSI tank filled, LOL.
http://www.mcarterbrown.com/forums/f...-feedback.html My feedback
If we do a deal, where you are sending me something, please don't use UPS. Out of the last three packages, one was delivered to my neighbors next door (Damn thieves), one was delivered with an item that was grossly not what I had bought, and the third wasn't delivered, but claimed to be.
|09-25-2012, 11:53 AM||#14 (permalink)|
US ARMY SIG CORPS
Join Date: Dec 2010
Location: Spanaway, Washington
You can speed up the pump by using low pressure (30 - 40psi) shop air as an input to the pump, acting as a fist stage. I dont know if it can be done with yours, but someone else here did it. Good luck.
|Thread Tools||Search this Thread|