ASP Roundhead build

Broch · 09-26-2012, 09:44 PM

In preparation for Winter, and Sprint Pump Event, I bought a roundhead. It just showed up in the mail today. I'm wanting to build something really special, and a great shooter. I'm not so concerned about rare or unique.

So, those of you who may have embarked on this, or who offer products to do such a build, this is your solicitation!!!! What works, what doesn't, etc....

Mine came used, and with no manual. It did come with two o-rings in a little baggie, that I have no idea what to do with...

Help!

Mishotaki · 09-26-2012, 09:51 PM

the 2 o-rings are the detents, they go in the 2 holes on the bottom of the body to stop double-feeds and roll-outs. you just insert them there and when the grip is screwed on, it will keep them pushed in there.

good luck with your build ^_^

Stitch · 09-26-2012, 09:55 PM

recommend that you size them and get some spares sooner than later =) (the o-rings)

otherwise setting mine up was a breeze - depending on what barrel you are going to use (since its cocker thread) you might need an undercocking kit or a modified pump (CCI sells them bored out for 1in barrels)

beyond that I cant think of anything else really different.

idkfa · 09-26-2012, 09:56 PM

Do remember that the detente are in place.

I have lost several sets and washed one set down the sink drain because I absentmindedly took my gun apart for cleaning.

Broch · 09-26-2012, 10:14 PM

Quote:

Originally Posted by Stitch

recommend that you size them and get some spares sooner than later =) (the o-rings)

otherwise setting mine up was a breeze - depending on what barrel you are going to use (since its cocker thread) you might need an undercocking kit or a modified pump (CCI sells them bored out for 1in barrels)

beyond that I cant think of anything else really different.

The only components I currently have are the body and a barrel. Am I better off buying a donor phantom out of bst and scavanging parts off of it, or am I best off to get the components one at a time.

Stitch · 09-26-2012, 10:16 PM

depends on what you want really

Some folks want NEW - most folks here dont mind used to some degree or another

You can certainly find some good deals right now - just keep in mind depending on your barrel OD you might need to work on the pump options

honestly most phantoms can be had in such good shape.....

good luck and post pics when yer done =)

Broch · 09-26-2012, 10:24 PM

For the Pump, I would ideally want to go with a CCM undercocker.

Donut SD · 09-26-2012, 10:36 PM

Quote:

Originally Posted by Broch

For the Pump, I would ideally want to go with a CCM undercocker.

If you find more other than your search, do share

been looking for some. They were vendettas right? With a ccm handle?

Broch · 09-26-2012, 10:44 PM

I believe so, yes!

-=ArchAngel=- · 09-26-2012, 11:42 PM

do u have a frame yet? The stock CCI frame is quite decent, but if u want something a bit different, look into the RTR gargoyle frame which has a slide trigger or Dukies DSP frame+valve combo that allows ingrip 12g changer.
Super Stanchy i believe has a performance kit which a lot of ppl have been liking so far.

09-26-2012, 09:44 PM	#1 (permalink)
Broch MCB Member Join Date: Jul 2008 Location: Ottawa, IL	ASP Roundhead build In preparation for Winter, and Sprint Pump Event, I bought a roundhead. It just showed up in the mail today. I'm wanting to build something really special, and a great shooter. I'm not so concerned about rare or unique. So, those of you who may have embarked on this, or who offer products to do such a build, this is your solicitation!!!! What works, what doesn't, etc.... Mine came used, and with no manual. It did come with two o-rings in a little baggie, that I have no idea what to do with... Help! __________________ I finally decided to start a thread for my Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Rocking it for the Fringe Division! https://www.facebook.com/pages/Fring...616810?fref=ts

09-26-2012, 09:51 PM	#2 (permalink)
Mishotaki Apple Sucker Join Date: Nov 2011 Location: The Great White North	the 2 o-rings are the detents, they go in the 2 holes on the bottom of the body to stop double-feeds and roll-outs. you just insert them there and when the grip is screwed on, it will keep them pushed in there. good luck with your build ^_^ __________________ My feedback

09-26-2012, 09:55 PM	#3 (permalink)
Stitch Pump Dinosaur Join Date: Dec 2007 Location: in a van, by the river	recommend that you size them and get some spares sooner than later =) (the o-rings) otherwise setting mine up was a breeze - depending on what barrel you are going to use (since its cocker thread) you might need an undercocking kit or a modified pump (CCI sells them bored out for 1in barrels) beyond that I cant think of anything else really different. __________________ Stitch FC www.final-chapter.org my mcb feedback

09-26-2012, 09:56 PM	#4 (permalink)
idkfa Stock Class Aficionado Join Date: Mar 2007 Location: Vancouver, BC, Canada	Do remember that the detente are in place. I have lost several sets and washed one set down the sink drain because I absentmindedly took my gun apart for cleaning. __________________ MCB Feedback eBay Feedback

09-26-2012, 10:16 PM	#6 (permalink)
Stitch Pump Dinosaur Join Date: Dec 2007 Location: in a van, by the river	depends on what you want really Some folks want NEW - most folks here dont mind used to some degree or another You can certainly find some good deals right now - just keep in mind depending on your barrel OD you might need to work on the pump options honestly most phantoms can be had in such good shape..... good luck and post pics when yer done =) __________________ Stitch FC www.final-chapter.org my mcb feedback

09-26-2012, 10:24 PM	#7 (permalink)
Broch MCB Member Join Date: Jul 2008 Location: Ottawa, IL	For the Pump, I would ideally want to go with a CCM undercocker. __________________ I finally decided to start a thread for my Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Rocking it for the Fringe Division! https://www.facebook.com/pages/Fring...616810?fref=ts

09-26-2012, 10:44 PM	#9 (permalink)
Broch MCB Member Join Date: Jul 2008 Location: Ottawa, IL	I believe so, yes! __________________ I finally decided to start a thread for my Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html Rocking it for the Fringe Division! https://www.facebook.com/pages/Fring...616810?fref=ts

09-26-2012, 11:42 PM	#10 (permalink)
-=ArchAngel=- Post Whore Join Date: Oct 2009	do u have a frame yet? The stock CCI frame is quite decent, but if u want something a bit different, look into the RTR gargoyle frame which has a slide trigger or Dukies DSP frame+valve combo that allows ingrip 12g changer. Super Stanchy i believe has a performance kit which a lot of ppl have been liking so far.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search