|The Dead Zone Paintball Related Chat|
| ||Thread Tools||Search this Thread|
|11-16-2012, 05:32 PM||#1 (permalink)|
How to separate a glued UL barrel?
what can I use to separate a glued UL barrel?
username: bacreman, 100+, 100% positive
|11-16-2012, 05:51 PM||#2 (permalink)|
Join Date: Mar 2012
Location: Vancouver, BC
Those amazing biceps of yours might work.
Just kidding, I don't think that would be a good idea.....
|11-16-2012, 05:56 PM||#5 (permalink)|
Facta Non Verba
Heat and torque.
Strap wrenches will be your friend.
|11-16-2012, 05:56 PM||#6 (permalink)|
Join Date: Aug 2007
blow drier will probably be underpowered for the job... you could get away with careful use of propane, or possibly a heatgun with enough output.
edit: good call on the strap wrenches, Deuce. Couple of those are basically must have for something like this.
|11-16-2012, 06:05 PM||#9 (permalink)|
The Man With No Plan
thats what i had to do...
warmed it with the torch then i clamped on the back with our engine lathe, and pulled/twisted and she popped out
i also left an old sp phantom barrel in a bucket of solvent, and the tip popped off when i went to clean it...
|Thread Tools||Search this Thread|