|The Dead Zone Paintball Related Chat|
| ||Thread Tools||Search this Thread|
|07-11-2013, 10:18 AM||#1 (permalink)|
The Man With No Plan
ICS on a non-ICS gun?
anybody ever done it?
anybody put an ICS in a gun with a standard backblock?
what was your solution?
my ICS isnt here yet... and neither is the gun its goin on, but im tryin to think ahead...
Its a karni ICS
Its a spanky Cobra Body/backblock
sooo anybody ever done it?
pics? thought process?
I really wanna use the stock backblock....
Im thinkin I can either thread the backblock for a screw, and inside the screw can be the ICS thread.....
|07-11-2013, 10:59 AM||#2 (permalink)|
Slowly making progress
Join Date: Apr 2008
Location: Vail, AZ
Bill (CCM) had a solution/product once upon a time. Can't remember what it was called though.
Aha! Found it. Happy reading:
guess <- direct link to the post that the picture is in.
FS:4500PSI Shoebox Compressor
Broken eNMEy neck? I can fix that. Want the can threaded, I can do that too. Click here!
>>> Link to prototype Dust Devil<<<
Last edited by desertT1; 07-11-2013 at 11:16 AM.
|07-11-2013, 08:52 PM||#3 (permalink)|
Join Date: Jun 2007
Location: Charleston, SC
I buy Automags and Parts: if you need cash shoot me a pm
|07-13-2013, 04:32 PM||#4 (permalink)|
Did this a few yrs back. I threaded the back cocking rod hole, and made a plug that was threaded for it , then threaded the inside of the plug for the karni cocking rod
only pic I could find of it:
I probably still have that backblock floating around somewhere
My Custom Guns: http://smg.photobucket.com/albums/v6...Custom%20Guns/
WTB: RT (Robtown) Valve/hammer kit for 04 Excalibur
WTB: Racegun autocockers
|07-13-2013, 04:43 PM||#5 (permalink)|
Join Date: Aug 2007
Was thinking of doing this to my S5RF, going to add a hidden second guide rod to the back block for sure though.
There are a couple ways to do custom ICS without modifying critical parts too much, my current favorite being a puller sleeve retained to unmodified back block with a screw, the sleeve fits inside the mainspring and requires a bored out IVG, and a purpose made cocking rod. Can be done the other way around too (sleeve on hammer). I prefer the first method because it makes disassembly and maintenance easier.
Last edited by ApoC_101; 07-13-2013 at 04:51 PM.
|Thread Tools||Search this Thread|