|The Dead Zone Paintball Related Chat|
| ||Thread Tools||Search this Thread|
|08-26-2013, 01:57 PM||#1 (permalink)|
Join Date: Sep 2012
U mag TPX
Do you think you could fit a U turn mag into a TPX the Zetamag looks cool but I think I would prefer a U turn mag so I wouldn't have to flip it With a U turn mag you could probably get 15 shots from a magazine that is the same length as a normal tru feed here is a ****y pic i did in paint its now to scale
here is a couple of normal U mags.
|08-26-2013, 02:10 PM||#2 (permalink)|
Not a chance... just no room with out making the frame so large you would need ET hands
RIP - Ed "BigDaddy" Roth and "Indian" Larry
Wild Geese - Coney Isand White Fish - ECA
What Serial Number Is Your Cocker? WTB
ECAP - "Making players dreams other players nightmares"
|08-27-2013, 12:57 AM||#3 (permalink)|
Join Date: Nov 2011
Location: Rice Lake, WI
|08-27-2013, 01:33 AM||#4 (permalink)|
Join Date: Feb 2012
Location: Martensville, SK
The paintballs would make the corner, but the spring/follower never would. That's why Milsig mags are as large as they are. You might be able to come up with something with a wider bottom end, like the top end of a TPX mag but the bottom half of a Milsig mag, but in all honesty the Zeta mags are a huge step forward. Something like this would be pointless/ugly/fairly useless considering the cost of a Zeta vs. what this would cost.
If the 'gh' in enough is pronounced 'f', the 'o' in women as a short 'i' sound, the 'ti' in nation as 'sh', and the 'i' in radio is pronounced as an 'ee' sound, then technically: "Ghotii" is pronounced "Fishy"
|08-27-2013, 09:17 AM||#5 (permalink)|
Official LL5 Dolphin-Dive
Not going to happen. There's a reason why te Milsig mags are as wide as they are, and that's so that the radius of the turn is gradual enough for then follower to move through. The tighter the radius the more spring pressure you'll need to make the turn and the more likely it will jam. In something the size of a TPX mag it just won't work.
|08-27-2013, 02:53 PM||#9 (permalink)|
Join Date: Feb 2011
Location: PEI, Canada
I think you might have better luck with a twin stack setup that is designed to carry a secondary stack beside/behind the first that will be moved into place when the first stack is depleted.
The tricky parts are designing a spring system for the first stack in such a way as to have it not get in the way when the second stack tilts into position, and a follower/pusher on the first stack that will activate the second while still moving out of the way as well.
|08-27-2013, 04:02 PM||#10 (permalink)|
Join Date: Oct 2009
|Thread Tools||Search this Thread|