|The Dead Zone Paintball Related Chat|
| ||Thread Tools||Search this Thread|
|09-04-2013, 06:45 PM||#1 (permalink)|
Join Date: Oct 2009
Even more questions about my pm7 frame. Now with pic goodness.
imgur: the simple image sharer
The first circle, is there supposed to be a magnet or spring there?
What sort of board is this?
The second circle, what is that plug for? It's not for wired eyes is it?
|09-07-2013, 03:06 AM||#3 (permalink)|
Old school from way back!
Join Date: Oct 2012
Location: Mentor, Ohio
I just sold my PM7 and I had to replace the eyes on it. The second circle is where the stock eyes go on that stock board. Unfortunately it took me near a month to find stock eyes for my PM7. I actually thought I may have to buy an aftermarket board just so I could install aftermarket eyes.
Started with a Splatmaster, moved onto a Nelspot 007, then came the Autocockers, then a STERLING Pump, next was a Bob Long defiant then a PM7. As of now I have 4 Sterling Pumps, 2 Phantom for SC and 2 Spyder's plus a bunch of extra parts.
|09-07-2013, 03:28 AM||#4 (permalink)|
Join Date: May 2013
I've rigged pm8 eyes in a pm7. Also ive seen mods where the put dm eyes in
E - Everybodys
G - Got
O - One
|09-07-2013, 04:25 AM||#5 (permalink)|
No Effects, just cooler
Join Date: Nov 2008
First circle is for a spring. Typically owners remove said spring and just run directly on the micro switch.
It is a stock PM UL board. This is a pretty important distinction because of the second circle. That isn't a plug for wired eyes. Your eye port is actually just left of the micro switch. It actually looks like there is a broken eye ribbon still in the connector in your pic.
Now if you replace the board with a DM board and modify your eye covers/ body/ frame, you could run wired DM eyes.
|Thread Tools||Search this Thread|