A drop in Auto Trigger Kit?

Talfuchre · 12-13-2007, 05:23 PM

Who would be interested in a drop in Auto Trigger kit for Dye, Benchmark, and WGP slider frames. It would consist of a Slider Trigger, a AT Cam and arm, and possibly a tapped pump rod.

Would this be something that people would buy?

If so, what price range would be good?

TF

Cunha · 12-13-2007, 05:29 PM

I think it is. The way things are going, they would gobble these up.

It should probably work for all slider frames besides the ones that use older style trigger plates.

Andrewliu6294 · 12-13-2007, 05:49 PM

i would take one if it werent as expensive as the CCM ones.

Contour · 12-14-2007, 04:27 AM

I believe price is key, but when isn't it. Also depends on aesthetics in my opinion.

Grendel · 12-14-2007, 06:52 AM

Given you can beat the cost of a CCM Cam setup alone you could sell a "cubic butt load" in my area. It seems like all the guys who recently went to pump [Snipers] in the last couple of years are now wanting sexy auto-triggers to add to them.

Talfuchre · 12-14-2007, 09:39 AM

I agree Grendel. I want to design one and see if CCM would manufacture it with thier cam.

TF

thumper · 12-15-2007, 07:58 AM

Quote:

Originally Posted by Grendel

Given you can beat the cost of a CCM Cam setup alone you could sell a "cubic butt load" in my area. It seems like all the guys who recently went to pump [Snipers] in the last couple of years are now wanting sexy auto-triggers to add to them.

yup...

One that would work with my stock WGP delrin pump kits would be nice.

Ide be pretty tickeled with a few tapped pump arm that fits #4-40 for the cam arm and threaded on the ends to fit the standard WGP pump handle and back block...

lots of fellows around here like playing pump in scenario games - but there comes a time when Way Outnumbered its nice to get on the trigger. (or to have a trigger to get on..

)

Su8lime Paintball · 12-15-2007, 12:54 PM

I'd take one, certainly.

Would it just replace the pump rod on my CCM kit? Or would it require a new pump kit and/or modifications.

Talfuchre · 12-15-2007, 01:47 PM

The goal would be to have a drop in trigger plate - cam - screw - and pump arm - or any combo of these.

TF

pump · 12-15-2007, 08:20 PM

gimme a few weeks...hahahahaah

12-14-2007, 06:52 AM	#5 (permalink)
Grendel MCB Member Join Date: Apr 2006 Location: Lexington, SC	Given you can beat the cost of a CCM Cam setup alone you could sell a "cubic butt load" in my area. It seems like all the guys who recently went to pump [Snipers] in the last couple of years are now wanting sexy auto-triggers to add to them. __________________ "Rather fail with honor than succeed by fraud." -Sophocles My Pyre #PY008 RF Oak Grendel's Feedback on MCB

12-15-2007, 08:20 PM	#10 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp	gimme a few weeks...hahahahaah __________________ Hawaiipb.com Autotriggers For Sale

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

12-13-2007, 05:29 PM	#2 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA	I think it is. The way things are going, they would gobble these up. It should probably work for all slider frames besides the ones that use older style trigger plates.

12-13-2007, 05:49 PM	#3 (permalink)
Andrewliu6294 Active Member Join Date: Aug 2007	i would take one if it werent as expensive as the CCM ones.

12-14-2007, 04:27 AM	#4 (permalink)
Contour Active Member Join Date: Jun 2007	I believe price is key, but when isn't it. Also depends on aesthetics in my opinion.

12-15-2007, 12:54 PM	#8 (permalink)
Su8lime Paintball Banned Join Date: Nov 2007 Location: Maynard, Eastville, and Ludlow Massachusetts	I'd take one, certainly. Would it just replace the pump rod on my CCM kit? Or would it require a new pump kit and/or modifications.