Lapco 8" Cocker-threaded dust black SMALL BORE barrels!!! (Micro Shot)

Brewtt · 07-02-2008, 10:51 PM

Lapco 8" Cocker-threaded dust black SMALL BORE barrels!!! (Micro Shot)

Lapco has recently done an EXTREMELY LIMITED run of 8" SMALL BORE Lapco one-piece "gun-drilled barrels" in .684 (Micro Shot) bore size!

These barrels were made because of my continual pestering for a short, cocker-threaded small bore one-piece Lapco barrel. Because of this Lapco agreed to do a SMALL run of 18 of these barrels for us(Fatal Paint) and to gauge interest elsewhere.

We (Fatal Paint) bought 7 before they were available to the public.

Here they are...

As of NOW there are about 8 left at Lapco.

Price? Please call Lapco tomorrow for this EXACT info. I'm sure it's on par with all Lapco's one-piece barrels. Relatively inexpensive and precisely machined.

Here's the original thread on Lapco forums started by ajnin of Fatal Paint touting the sheer brilliance of this barrel.

I did something today that made me smile.

If you want to own a 1 of 18 run barrel and are in need of a SHORT SMALL BORE precisely gun-drilled barrel... then look no further and call Lapco tomorrow. There are FEW remaining. (Less than 8).

If you are LUCKY enough to call early tomorrow and claim one of these barrels... please mention me, Brewtt, my team Fatal Paint and/or especially MCB! Thanks to all at MCB!

Contact information for you for Lapco Paintball:

Lapco Paintball
Phone:
Toll Free: 800-640-8085
Local: 661-295-6815

Harbinger[TG] · 07-02-2008, 11:02 PM

Damn those are sexy. Nice going Brewtt.

PJ · 07-02-2008, 11:12 PM

Checked the LAPCO website, they have them listed at $53. Wish I could....

drg · 07-02-2008, 11:23 PM

Very tempting to do a small sniper project ...

Railgun · 07-02-2008, 11:49 PM

I LOVE smaller barrels. I ended up getting one because I could and I've been a good boy so I deserve it.

It's also the most money I've ever paid for a barrel. But I love my other Lapcos so I know it'll get used.

And it's bringing my mini Superbolt Sniper project that much closer to the light of day....

LoneWolf · 07-03-2008, 10:57 AM

Damn - if only they were a little larger bore.....I've only run into that small of paint a few times.

If they'd do it in a .687 or .690, I'd pick one up in a heartbeat.....

redthirst · 07-03-2008, 02:20 PM

Just ordered one... man, this thing's gonna look sweet on a BT TM-7...

Thanks for the heads up, Brewtt.

Mayvik · 07-04-2008, 09:06 PM

Damn, these are nice barrels..would look perfect on a dust black Micromag...thanks for the heads up Brewtt

I would totally buy one of these if I hadn't just bought a 10" dust Scepter kit for my cocker/micro.

Tugboater203 · 07-04-2008, 09:24 PM

How much are they?
Tug

PJ · 07-05-2008, 02:04 AM

Quote:

Originally Posted by PJ

Checked the LAPCO website, they have them listed at $53. Wish I could....

Quote:

Originally Posted by Tugboater203

How much are they?
Tug

Ahem.....^^^^^^

07-02-2008, 10:51 PM	#1 (permalink)
Brewtt CHEERS! Join Date: Mar 2006 Location: Northern California Posts: 4,123	Lapco 8" Cocker-threaded dust black SMALL BORE barrels!!! (Micro Shot) Lapco 8" Cocker-threaded dust black SMALL BORE barrels!!! (Micro Shot) Lapco has recently done an EXTREMELY LIMITED run of 8" SMALL BORE Lapco one-piece "gun-drilled barrels" in .684 (Micro Shot) bore size! These barrels were made because of my continual pestering for a short, cocker-threaded small bore one-piece Lapco barrel. Because of this Lapco agreed to do a SMALL run of 18 of these barrels for us(Fatal Paint) and to gauge interest elsewhere. We (Fatal Paint) bought 7 before they were available to the public. Here they are... As of NOW there are about 8 left at Lapco. Price? Please call Lapco tomorrow for this EXACT info. I'm sure it's on par with all Lapco's one-piece barrels. Relatively inexpensive and precisely machined. Here's the original thread on Lapco forums started by ajnin of Fatal Paint touting the sheer brilliance of this barrel. I did something today that made me smile. If you want to own a 1 of 18 run barrel and are in need of a SHORT SMALL BORE precisely gun-drilled barrel... then look no further and call Lapco tomorrow. There are FEW remaining. (Less than 8). If you are LUCKY enough to call early tomorrow and claim one of these barrels... please mention me, Brewtt, my team Fatal Paint and/or especially MCB! Thanks to all at MCB! Contact information for you for Lapco Paintball: Lapco Paintball Phone: Toll Free: 800-640-8085 Local: 661-295-6815 __________________ Dabbling in the recreational paintball arts since 1991. Last edited by Brewtt; 07-02-2008 at 11:10 PM.

07-02-2008, 11:02 PM	#2 (permalink)
Harbinger[TG] The Watchmen Join Date: Apr 2007 Location: Florida Posts: 6,789	Damn those are sexy. Nice going Brewtt. __________________ TRAILGUNNERS SCENARIO \| RULES and FAQs My Mega Sale

07-02-2008, 11:12 PM	#3 (permalink)
PJ Hawaiian-shirted hooligan Join Date: Apr 2006 Location: Powell, TN Posts: 2,728	Checked the LAPCO website, they have them listed at $53. Wish I could.... __________________ Paul AIM: PJDarknight CPPA #1145 / PPIG #496 / LPPC #103 / POG #1047 / Team Rogue Cell #7 PJ's Gallery on MCB Feedback on MCB

07-02-2008, 11:23 PM	#4 (permalink)
drg Post Whore Join Date: Mar 2007 Posts: 1,364	Very tempting to do a small sniper project ... __________________ My feedback: PBN Old-New / AO / CC / MCB Halfcocker.com - The site for all things halfblock/midblock cocker HawaiiPB.com - Paintball forums for the state of Hawaii

07-02-2008, 11:49 PM	#5 (permalink)
Railgun MCB Member Join Date: Oct 2006 Posts: 2,340	I LOVE smaller barrels. I ended up getting one because I could and I've been a good boy so I deserve it. It's also the most money I've ever paid for a barrel. But I love my other Lapcos so I know it'll get used. And it's bringing my mini Superbolt Sniper project that much closer to the light of day.... __________________ Witty saying to be plagarized soon.....

07-03-2008, 10:57 AM	#6 (permalink)
LoneWolf Rec Poster Join Date: Apr 2006 Posts: 32	Damn - if only they were a little larger bore.....I've only run into that small of paint a few times. If they'd do it in a .687 or .690, I'd pick one up in a heartbeat.....

07-03-2008, 02:20 PM	#7 (permalink)
redthirst I Shoot First Join Date: Oct 2006 Location: SC Posts: 284	Just ordered one... man, this thing's gonna look sweet on a BT TM-7... Thanks for the heads up, Brewtt. __________________ Mercy is the mark of a great man, stab guess I'm just a good man, stab well... I'm all right. Feedback: Spec Ops, MCB, PbN, eBay

07-04-2008, 09:24 PM	#9 (permalink)
Tugboater203 www.yankeepaintball.com Join Date: Mar 2006 Location: Oxford,CT Posts: 1,565	How much are they? Tug __________________ Connecticut has a new field! Bookmark www.yankeepaintball.com Open Now! Paintball is Fun! What others think of me Tugs Feedback Upcoming Yankee Paintball events: Scenario/ Big Game Oct 18 Pump Day/ Swap Meet Oct 26 3 Man Speedball Tourney Nov 16

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search