Buy, Sell, Trade

[dukie]

Here it is, the sales thread for First run of DRVs. For other information go here:

The DRV Revolver

Here is ( approximately) what you will be ordering:

PICS



Rough prototype image, the final prodcution model will be similar and prettier lol. The grips will not include electrical tape and dirt. They will be stained and sealed, but I have not decided on a color yet. Likely something dark.



I am going to attempt an internal air line on the right side. This will replace the airline trigger guard and the little plate seen on the right side. It should be possible with the changes that have been made in the prototype stage. There will not be a top strap.


Here are the specs:

- .68 Cal
- SINGLE ACTION
- Cocking the hammer rotates the cylinder and latches the hammer. Pull the trigger and it fires. Repeat for each shot.
- A hammer safety will be included. I have not decided what it will be yet.
- Under barrel spring feed ~10 round. The spring feed is used to reload the cylinder as it rotates. You must pull the cylinder to refill the springfeed.
- 12 gram powered
- CCI 12gram bucket changer is integrated into the grip. In theory this could be removed and a remote line installed.
- The valve comes out the back without dissasembly of the rest of the marker
- Cocker barrel threading
-External velocity adjustment.
-Dust black anodizing
-Serial numbers will be hand stamped. "DRV - XXX" If you "reserved" a serial number you can keep it until the middle of january. Then it goes up for grabs to whoever pays first.

OK, now to the down and dirty, the price:

As shown, standard design DRV: $750 USD plus shipping. No barrel included

Canadians ( or anyone else for that matter) can pay in Canadian funds but you must tell me when you order. The invoiced amount is what you pay no matter what the rates do before you pay.

Shipping will depend on the final packaging that I choose. I include $10 for pachaging materials and handling, $10 goes towards insurance and the rest is shipping. Use the following for a baseline ( agian this depends on the packaging):

Shipping in Canada $30 USD
Shipping to the US $40 USD

This includes Canada post expedited parcel delivery service and insurance for full value.

If you choose to remove stock parts from your order, I take no responsibility whatsoever how your parts fit, function or look with the parts I have supplied. That being said, if you would like to save yourself some money you can order the marker without some of the off the shelf parts. I have also provided some optional parts that just aren’t cost effective for me to supply in the base price. A “-“ in front means you remove that price from the base price, a “+” means that you add that to the base price, or a combination of the two.

+25 US Extra cylinder.

-15 US replace springfeed with a plug

+12 US Get both the plug AND springfeed

+10 US Custom length SHORTER springfeed

+15 US SEMI Gloss black ( IE basically not dust ).

+5 US Raw aluminum parts, you take car of your own anodizing.

The way it works

If you decide to order one ( or 5 if you want )
-PM me with what you want to order. INCLUDE YOUR PAYPAL ADDRESS so I can invoice you.

-Post in the thread as well what you wanted to order so that there is an easily accessible “paper” trail in case you ( or I ) lose your PM’s.

-I will send you a paypal invoice for 50% of what you are ordering ( excluding shipping). You will get my name, address, the amount of the invoice, details of what you have ordered.

-pay the invoice.

-The sales deadline will be JANUARY 31st. You have to pay on or before this date!!

-Any changes/customization that you ask for ( other than those listed) will be completed at the end of the manufacturing process. I can handle any customization that you want, but it puts your shipment to the end of the list. I want this production process to proceed as smoothly as possible, building 10 completely custom makers when I am supposed to be building 10 identical markers is not efficient.

-Any changes to your order will change the amount of down payment required, that difference is due when you request the change.

-Customizing will be charged according to hours and materials used. Payment is due before I ship.

-Based on my current schedule, I believe I can complete fabrication in 12 weeks for up to 20 markers. Less than 20 may or may not be less, more than 20 will likely be more.

- Your down payment is part of the contract with me. It shows that you have ordered in good faith and wish to complete the transaction. It is non refundable, don’t ask for a refund. The only way that you will get that money back is if I cannot complete the order.

-You will recieve the second invoice for the other half of your payment,plus shipping when yours is ready to ship. Other shipping options are available for an additional charge.

USEFUL STUFF:


Some videos are up:

DRV :: DRVvalveinstal.mp4 video by duke737 - Photobucket

DRV :: DRVvalveremoval.mp4 video by duke737 - Photobucket

DRV :: DRVSideplate.mp4 video by duke737 - Photobucket

DRV :: DRVpallspringadjust.mp4 video by duke737 - Photobucket

DRV :: DRVdetentinstal.mp4 video by duke737 - Photobucket

How to modify your cocking pall:

http://s325.photobucket.com/albums/k...difiedpall.mp4

making a new pall spring:

http://s325.photobucket.com/albums/k...pallspring.mp4

[Deuce]

Question on Anno. If we order raw to have our own anno can it come back to you for assembly?

[Crimson Death]

Awesome!!!

I'm ready to order.

PM sent with all my info

Thanks
AJ

[dukie]

Originally Posted by Dirty Deuce

Question on Anno. If we order raw to have our own anno can it come back to you for assembly?

I don't have any problem with that provided you pay for any fees/shipping.

Originally Posted by Crimson Death

awesome!

I'm ready to order.

Dude you must have edited that while I was reading. Thats not what it said a minute ago! Send me your paypal addy and I will send you an invoice.

[Crimson Death]

Originally Posted by dukie

Dude you must have edited that while I was reading. Thats not what it said a minute ago! Send me your paypal addy and I will send you an invoice.

Yea I was so excited I didn't read everything and answered my own question after I actually read your post fully.

Payment sent!

[Ivan]

Just sent a PM.

Would like a DRV in CDN funds. With the serial # 1984.

Thanks!

Dust black please.
+3 extra cylinders
+ lanyard ring
+ extra 5 round springfeed

[dukie]

Originally Posted by Crimson Death

Yea I was so excited I didn't read everything and answered my own question after I actually read your post fully.

Payment sent!

Got it!

Originally Posted by Ivan

Just sent a PM.

Would like a DRV in CDN funds. Left Raw, with the serial # 1984.

Thanks!

Sent you an invoice

2 down, many many more to go

[CrazyBoy78]

I told myself I wouldn't buy while unemployed but EI just paid me a ton of back pay/compensation. So I'm in.

I'll pay in CDN funds, just gimme a stock DRV with the SN# 078

Also PM'ed ye!

[aldumil]

I'll take a normal DRV with SN# 5 if the other guy doesn't take it.

[dukie]

Originally Posted by CrazyBoy78

I told myself I wouldn't buy while unemployed but EI just paid me a ton of back pay/compensation. So I'm in.

I'll pay in CDN funds, just gimme a stock DRV with the SN# 078

Also PM'ed ye!

Invoice sent!

Originally Posted by aldumil

I'll take a normal DRV with SN# 5 if the other guy doesn't take it.

Invoice sent and payment recieved!