Brass Freak compatible inserts
4/15/11 - Update
I have added .685 inserts to my product line.
4/30/10 - Update
I now have 0.670 inserts for sale. These are of limited quantity, and I may not be able to get any more of the base stock in the future.
I currently have 14 in stock.
I have 0.670, 0.675, 0.680 and 0.685 brass Freak compatible inserts for sale.
0.670 = $30
0.675 = $30
0.680 = $30
0.685 = $30
The Mayvik marking method is standard on all inserts. There will be one line scribed around the 0.675 insert, two lines scribed around the 0.680 insert and three lines scribed around the 0.685 insert.
Up to 4 inserts per mailer. For quantites above 4 inserts contact me about shipping.
Shipping is $7.00
(Yes, I know this is more than the going rate, but it covers packing materials also.)
Item(s) will be packed in 2" diameter tubes with plenty of bubble wrap.
I accept Paypal, checks and money orders. Please include your MCB screen name, item(s) and type of shipping with any form of payment. Checks or money orders must be made out to Joseph McNeer so they match my official ID
Paypal'd items ship as soon as possible, which is usually next day. Check and money order paid for items ship after the payment clears.
Here is the original thread about these.
I will add reviews a people write them. I encourage constructive criticism, as I wish to perfect my products and make customers happy.
If you experience any problems with my inserts, please contact me via PM or telephone, before posting anything negative. I endeavor to have nothing but happy customers.
Weight of insert:
13 grams for a SP aluminium
50 grams for a brass insert
On to the pictures!
On the left, three 0.675 inserts (the leftmost is the prototype), in the center an original SP Freak insert and on the right, three 0.680 inserts (the rightmost is the prototype).
The Mayvik marking method.
0.680 inserts on the left and 0.675 inserts on the right.
Close up of the double line on the 0.680 insert and the single line on the 0.675 insert
Some more eye candy...
The top row is all 0.680 inserts. The lower left side group is all rejects for quality control. The lower right sider group is all 0.675 inserts!
Thanks for looking,
Current order status:
ironchef97 - one .675 one .680 - Shipped 02-16-10
LiqTenExp - one .680 - Shipped 02-16-10
Mann - one .675 one .680 - Shipped 02-16-10
wrongbloke - one .675 - Shipped 02-16-10
joedirt199 - one .675 - Shipped 02-19-10
Mayvik - one .675 one .680 - Shipped on 02-19-10
Splattttttt - one .675 one .680 - Shipped on 02-24-10
tencent - one .680 - Shipped on 02-24-10
Castro #66 - one .680 one .675 - Shipped on 02-24-10
Leafy - one .675 - Shipped on 02-24-10
chopper duke - one .675 - Shipped on 02-24-10
Mayvik - one .675 one .680 - Replacements - Shipped on 03-18-10
d4m4don3 - one .680 - Shipped on 03-18-10
wolverine85929 - two .680 two .675 - Shipped on 03-18-10
flyinggobbo - one .675 - Shipped on 03-18-10
KingAcquisitions - one .675 - Shipped on 03-18-10
Nicad - one .680 - Shipped on 03-18-10
BryceLarson - one .675 - Shipped on 03-18-10
Mar - one .675 one .680 - Shipped on 03-18-10
rudz - one .680 - Shipped on 03-18-10
Snowzone - one .675 - Shipped on 03-18-10
jk_6109 - one .675 one .680 - Shipped on 03-18-10
Daze - two .675 - Shipped on 03-18-10
sonixr7 - one .675 one.680 - Shipped on 03-18-10
Meph - one .675 one .60 - 03-22-10
BigDaddyT - two .680 - 03-22-10
Small Block - one .675 one .680 - Shipped on 03-27-10
ApoC_101 - one .675 one .680 - Paid - Shipped on 03-30-10
Dirge - one .675 one .680 - Paid - Shipped on 03-30-10
docfire - one .675 - Paid - Shipped on 03-30-10
SSP - one .675 one .680 - Shipped on 03-30-10
dundadun - one .675 one .680 - Shipped on 04-04-10
Robo - one .680 - Shipped on 04-04-10
IWAP57 - one .675 - Shipped on 04-04-10
Hellion360 - one .675 - Shipped on 04-04-10
grayghost - three .675 one .680 - Shipped on 04-04-10
nefarious_one - one .680 - Shipped on 04-15-10
Crimson Death - one .675 one .680 - Shipped on 04-15-10
Old_B4LL3R - one .675 one .680 - Shipped on 04-15-10
Sevier - one .675 one .680 - Shipped on 04-15-10
Old_B4LL3R - replacement .675 - Shipped on 05-04-10
slider_68 - one .670 one .675 one .680 - Shipped on 05-04-10
HMB - one .675 one .680 - Shipped on 05-04-10
HItransplant - one .675 one .680 - Shipped on 05-04-10
Ced23Ric - one .675 one .680 - Shipped on 05-04-10
joliandthai - one .670 one .675 - Shipped on 05-04-10
Hmudd13 - one .675 - Shipped on 05-04-10
woodwose - one .680 - Shipped on 05-04-10
sonixr7 - one .670 - Shipped on 05-04-10
Ghost 334 - one .675 one .680 - Shipped on 05-04-10
cjottawa - one .675 - awaiting payment
LP qwerty - one .675 - awaiting payment
EDDAKA - one .680 - awaiting payment
How long do you plan on doing these? I would love to build a set from your inserts & Palmer's for my current project. Hell its far from finished but I am going to get the UL back bored.
I plan to produce them until orders stop or I run into insurmountable problems.
what do we need to do to send a payment. all i need is a .675 without engraving since it will probably be the only one i have. have paypal.
Mentioned this in chat, but I'll bring it up here and cross post between tymcneer and the PPS threads:
How about instead of laser engraving, just etching notches in the OD, similar to what AGD does on the Level 10 carriers? e.g. 1 notch for .675, 2 notches for .680, 3 notches for .685, 4 notches for .690, or whathaveyou?
Since I'm assuming these are hanging out on a lathe during fabrication anyway, that would eliminate the need for another operation or bringing the inserts to a different tool / engraving shop for identification.
Ty, as soon as I get some cashola, I'll get getting a .675 one fo sho!
Mayvik... I will start doing this method.
Chopper Duke... Catch me when you have the funds, and I will be more than happy to send you one out, or you can catch me at Tunaball, assuming you will be there.
Sweet, I'll take one of each. I guess do a single notch on the .675 and two notches on the .680?
Sounds like a plan Mayvik. PM me for details about shipping and payment
|All times are GMT -4. The time now is 08:02 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC