FloryPB Sheridan Parts now Available

Paintballer50505 · 08-18-2010, 12:17 AM

FloryPB-Sheridan Parts

Just to start things off I made some velocity adjusters in brass and stainless. All velocity adjusters come with stainless steel hardware. Going to make some more things in brass stainless and aluminum stay tuned

Price is $20 shipped priority for stainless
$25 shipped priority for brass
$15 shipped priority for Aluminum

Front FeedCaps

I found some left over brass stock that I had and turned up three caps quickly. These will be available in stainless steel, aluminum and brass. Just let me know if you guys are interested in them in the other materials.

Two of them are made to match the velocity adjusters and the third is a slimmer version of the stock cap. All caps have a cupped backing instead of a flat wall to be a little nicer with paint.

Price:
Brass: $12.50 shipped priority with tracking
Stainless Steel: $10.00 shipped priority with tracking
Aluminum: $8.50 shipped priority with tracking

All of my phantom products are available here
FloryPB Phantom parts Custom Feedtubes and Bobbed Valves, have it your way variety

My Policies

I do not take money for parts that I have not produced.
Shipping outside of the US will cost more (price will be determined based on location)
Shipping method is priority with tracking
Price posted includes shipping and any other fees for customers state side (what you see is what you pay)
If you are having and problems with my products contact me right away and I will do what I can to make it right
Please allow two to three days for finishing and shipping.

Feedback here Paintballer50505's Feedback
Feedback PBN new PbNation - BST Feedback - paintballer50505

FloryPB

P.S. And remember all FloryPB products are mullet approved

rudz · 08-19-2010, 02:57 AM

nice stock...

Cunha · 08-19-2010, 04:40 AM

Those products look great and for a good price too.

Nice looking phantom..cool feed tube.

Paintballer50505 · 08-19-2010, 10:40 AM

Thanks guys now I just need people to buy some stuff. The phantom valve bodies are selling but crickets from the Sheridan people

the_chemist · 08-19-2010, 05:07 PM

Do the Brass RVA's have a hole tapped for the rear frame screw, also do the come with a spring guide(8 or 10d nail cut down)?

The spring guide is not so important but nice

I will get one if it has the tapped hole

Paintballer50505 · 08-19-2010, 05:16 PM

They are tapped for the rear frame screw. I will look into the spring guide currently no but ill see about that tonight

joedirt199 · 08-19-2010, 09:30 PM

would be looking for an RVA that is larger hole for spyder style springs. i bored out my hammer and would like to do my tuning with spyder springs since they are everywhere. anyway you can make one fit in stainless would be great.

Paintballer50505 · 08-19-2010, 11:41 PM

It can be done I need to find one of my spyders to snag some dimensions off of as well.

Updated pictures with the new spring guides thanks for the idea the chemist

Quote:

Originally Posted by joedirt199

would be looking for an RVA that is larger hole for spyder style springs. i bored out my hammer and would like to do my tuning with spyder springs since they are everywhere. anyway you can make one fit in stainless would be great.

the_chemist · 08-20-2010, 01:44 AM

Nice spring guide!
The other shops typically have a two part system , but less parts mean less lost

Paintballer50505 · 08-22-2010, 11:49 PM

im back in the shop have two projects lined up for tomorrow. One more possible sale on a velocity adjuster as well. I am going to start running some brass and aluminum bobbed phantom valves over the next few days as well as some other things hopefully

08-18-2010, 12:17 AM	#1 (permalink)
Paintballer50505 Post Whore Join Date: Jul 2007 Location: New Jersey	FloryPB Sheridan Parts now Available FloryPB-Sheridan Parts Just to start things off I made some velocity adjusters in brass and stainless. All velocity adjusters come with stainless steel hardware. Going to make some more things in brass stainless and aluminum stay tuned Price is $20 shipped priority for stainless $25 shipped priority for brass $15 shipped priority for Aluminum Front FeedCaps I found some left over brass stock that I had and turned up three caps quickly. These will be available in stainless steel, aluminum and brass. Just let me know if you guys are interested in them in the other materials. Two of them are made to match the velocity adjusters and the third is a slimmer version of the stock cap. All caps have a cupped backing instead of a flat wall to be a little nicer with paint. Price: Brass: $12.50 shipped priority with tracking Stainless Steel: $10.00 shipped priority with tracking Aluminum: $8.50 shipped priority with tracking All of my phantom products are available here FloryPB Phantom parts Custom Feedtubes and Bobbed Valves, have it your way variety My Policies I do not take money for parts that I have not produced. Shipping outside of the US will cost more (price will be determined based on location) Shipping method is priority with tracking Price posted includes shipping and any other fees for customers state side (what you see is what you pay) If you are having and problems with my products contact me right away and I will do what I can to make it right Please allow two to three days for finishing and shipping. Feedback here Paintballer50505's Feedback Feedback PBN new PbNation - BST Feedback - paintballer50505 FloryPB P.S. And remember all FloryPB products are mullet approved __________________ TopGun FP&PL Scrubs Theres no me in suck but there is always u Last edited by Paintballer50505; 11-05-2010 at 06:52 PM.

08-19-2010, 02:57 AM	#2 (permalink)
rudz BEO MAFIA Join Date: Aug 2006 Location: SoCal Riverside County	nice stock... __________________ SOMETIMES ITS GOOD TO BE EVIL BEO MAFIA

08-19-2010, 10:40 AM	#4 (permalink)
Paintballer50505 Post Whore Join Date: Jul 2007 Location: New Jersey	Thanks guys now I just need people to buy some stuff. The phantom valve bodies are selling but crickets from the Sheridan people __________________ TopGun FP&PL Scrubs Theres no me in suck but there is always u

08-19-2010, 05:16 PM	#6 (permalink)
Paintballer50505 Post Whore Join Date: Jul 2007 Location: New Jersey	They are tapped for the rear frame screw. I will look into the spring guide currently no but ill see about that tonight __________________ TopGun FP&PL Scrubs Theres no me in suck but there is always u

08-22-2010, 11:49 PM	#10 (permalink)
Paintballer50505 Post Whore Join Date: Jul 2007 Location: New Jersey	im back in the shop have two projects lined up for tomorrow. One more possible sale on a velocity adjuster as well. I am going to start running some brass and aluminum bobbed phantom valves over the next few days as well as some other things hopefully __________________ TopGun FP&PL Scrubs Theres no me in suck but there is always u

08-19-2010, 04:40 AM	#3 (permalink)
Cunha Post Whore Join Date: Apr 2006 Location: Monterey, CA	Those products look great and for a good price too. Nice looking phantom..cool feed tube.

08-19-2010, 05:07 PM	#5 (permalink)
the_chemist Post Whore Join Date: Jan 2010 Location: San Fran now	Do the Brass RVA's have a hole tapped for the rear frame screw, also do the come with a spring guide(8 or 10d nail cut down)? The spring guide is not so important but nice I will get one if it has the tapped hole

08-19-2010, 09:30 PM	#7 (permalink)
joedirt199 ur my sister Join Date: Apr 2009 Location: St Louis	would be looking for an RVA that is larger hole for spyder style springs. i bored out my hammer and would like to do my tuning with spyder springs since they are everywhere. anyway you can make one fit in stainless would be great.

08-20-2010, 01:44 AM	#9 (permalink)
the_chemist Post Whore Join Date: Jan 2010 Location: San Fran now	Nice spring guide! The other shops typically have a two part system , but less parts mean less lost

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search