Sterling asa Rails and Side tapped Valve bodys

Rainman229 · 03-28-2007, 08:47 PM

I have 5 valve body's and rails. There In raw alum.

4 valve body's are ported on the Right side

1 is left side ported

Rails allow vert Asa.

Rail and valve body $85 shipped for the set. Will not part sets unless there is each part is accounted for.

Ano Add $10 or the set single color

will have pictures later

medic49675 · 03-28-2007, 10:31 PM

Will these work on new and old style sterlings?

Rainman229 · 03-28-2007, 11:51 PM

Not Sure if they willwork on new ones. There basesd of older style with barrel threads. But should work on rentals too

Rainman229 · 03-29-2007, 01:44 AM

Rainman229 · 03-31-2007, 07:13 PM

Damn I must of been smoking something when i added up the price of this.

Rail $20 + valve body $45 = $65 Plus $5 shipping Total $70 shipped

chrisshanks · 04-05-2007, 03:19 PM

I'll take a set - where do I send the funds?

Also, what verticle ASA does it accommodate?

I am still looking for an 'undercocking' pump to work with this set too if you're interested

can let me know the paypal address via email if you want: chrisshanks@comcast.net

Rainman229 · 04-05-2007, 03:51 PM

I have a different rail setup for under cocking. Just need to find some time to run them. and also make the pump.

victor13 · 04-05-2007, 05:36 PM

Hmmm. I would like one of these if they fit on the new sterlings. Please email me if you ever find out they do work on the new sterlings.

flarpy at gmail.

chrisshanks · 04-05-2007, 06:37 PM

Quote:

Originally Posted by Rainman229

I have a different rail setup for under cocking. Just need to find some time to run them. and also make the pump.

cool, if you're not too busy, can we start a dialogue so that I can fund you properly before you take on (or after) the project?

Rainman229 · 04-06-2007, 01:27 AM

Quote:

Originally Posted by victor13

Hmmm. I would like one of these if they fit on the new sterlings. Please email me if you ever find out they do work on the new sterlings.

flarpy at gmail.

not sure if they would fit. not even sure if anything frame wise was changed. or anything else. haven't been lucky enough to get a new one in my hands.

Quote:

Originally Posted by chrisshanks

cool, if you're not too busy, can we start a dialogue so that I can fund you properly before you take on (or after) the project?

just send me a pm. May be awhile to i can get to making them. have a bunch a work here as is.

03-28-2007, 08:47 PM	#1 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj	Sterling asa Rails and Side tapped Valve bodys I have 5 valve body's and rails. There In raw alum. 4 valve body's are ported on the Right side 1 is left side ported Rails allow vert Asa. Rail and valve body $85 shipped for the set. Will not part sets unless there is each part is accounted for. Ano Add $10 or the set single color will have pictures later __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

03-28-2007, 10:31 PM	#2 (permalink)
medic49675 Pumpers use both hands. Join Date: Aug 2006 Location: Nicholasville, KY	Will these work on new and old style sterlings? __________________ Knowledge is the only good and ignorance the only evil.

03-28-2007, 11:51 PM	#3 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj	Not Sure if they willwork on new ones. There basesd of older style with barrel threads. But should work on rentals too __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

03-29-2007, 01:44 AM	#4 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj	__________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

03-31-2007, 07:13 PM	#5 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj	Damn I must of been smoking something when i added up the price of this. Rail $20 + valve body $45 = $65 Plus $5 shipping Total $70 shipped __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

04-05-2007, 03:19 PM	#6 (permalink)
chrisshanks Active Member Join Date: Sep 2006	I'll take a set - where do I send the funds? Also, what verticle ASA does it accommodate? I am still looking for an 'undercocking' pump to work with this set too if you're interested can let me know the paypal address via email if you want: chrisshanks@comcast.net

04-05-2007, 03:51 PM	#7 (permalink)
Rainman229 A god in my own mind Join Date: Apr 2006 Location: nj	I have a different rail setup for under cocking. Just need to find some time to run them. and also make the pump. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

04-05-2007, 05:36 PM	#8 (permalink)
victor13 Active Member Join Date: Nov 2006	Hmmm. I would like one of these if they fit on the new sterlings. Please email me if you ever find out they do work on the new sterlings. flarpy at gmail.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search