mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Dealers Forum (http://www.mcarterbrown.com/forums/dealers-forum/)
-   -   Sheridan Seal Kits, Valve Tools, Springs, Pump Arms and Misc Parts (http://www.mcarterbrown.com/forums/dealers-forum/149657-sheridan-seal-kits-valve-tools-springs-pump-arms-misc-parts.html)

MaD 02-04-2011 02:50 PM

Sheridan Seal Kits, Valve Tools, Springs, Pump Arms and Misc Parts
 
Sheridan Valve Tools

Was tired of selling seals and not having the valve tool for folks so I contracted a MCB forum machinist to make some for me. To keep the cost down they're steel (similar to the old factory ones which are no longer made).

Length is ~6" so slightly longer than most others. The jam nut end is the standard square with the hole bored in it.

He did something very neat on the valve pull end which was to counterbore it. This pushed the threads down in further. This means when you thread it into the valve it pushes all the way down to the back face of the valve guide so you're not just bending the stem around but using the valve itself for leverage.

$12.99 + shipping

http://i30.photobucket.com/albums/c3...psb4302c23.jpg

http://i30.photobucket.com/albums/c3...pse262576c.jpg


Seal Kits

The Co2 face seals are urethane seals which I punch myself. Note that these are just the seals for the valve. Bolt or other O-rings are not included.

Shipping is $2.00 for first class or $5.20 for priority mail (same price for one or multiple)

---------------

Old style valve (non-cartridge) $12.00 NONE AVAILABLE

Currently out of these. See Big Matt:
http://www.mcarterbrown.com/forums/m...rketplace.html


http://i30.photobucket.com/albums/c3...n/be2041a1.jpg

---------------

Cartridge valve $12.00 NONE AVAILABLE

Currently out of these. See Big Matt:
http://www.mcarterbrown.com/forums/m...rketplace.html


http://i30.photobucket.com/albums/c3...n/fde80ce9.jpg

---------------

CA Valve $7.00

http://i30.photobucket.com/albums/c3...A_Sheridan.jpg

---------------

12g Co2 face seals - $.60 ea or $1 for two

http://i30.photobucket.com/albums/c3...ce_seals-1.jpg

---------------

Replacement seals for the valve stem. $.60 ea or $1 for two

Note: This is a DIY process. It requires you to carefully pick out your old valve stem seal and get this one in. It's not rocket science and I've done it successfully many times now but I take no responsibility if you are not successful.

http://i30.photobucket.com/albums/c3...alve_seals.jpg

---------------



Other Parts
(Same deal with shipping costs as the seal kits)


Safety ball + spring $2.00

http://i30.photobucket.com/albums/c3...n/77cb54d9.jpg

---------------

Valve Spring (New) $2.00

http://i30.photobucket.com/albums/c3...n/0432fe7b.jpg

---------------

Short Main Spring (New) $3
Fits PGP and most "pistol" models

http://i30.photobucket.com/albums/c3...n/44dc2a2e.jpg

---------------

Long Main Spring (New) $6
2 1/2" Spring / KP length

http://i30.photobucket.com/albums/c3...n/8f7e2134.jpg

---------------

Action Fastener Screw Assembly $6.50
aka the "Pringle Screw" per Weltman

http://i30.photobucket.com/albums/c3...n/5a210ce2.jpg

---------------

Brass and Stainless Pump Arms (made to order)

6" = $8 /ea
Add $1 per additional inch (can make any length you need)

http://i30.photobucket.com/albums/c3...cking_Rods.jpg

http://i30.photobucket.com/albums/c3..._Stainless.jpg

Titus 02-04-2011 02:53 PM

Ohhh thank you for doing this.

CA Valve $7.00


Would that work for this?

http://www.mcarterbrown.com/forums/w...asty-pump.html

It looks different.

Magoo 02-05-2011 11:52 PM

I'll take that last non-cart valve kit. PM'd.

LUKE 02-06-2011 02:35 AM

I'll take the cartridge valve one. PM sent.

Usurper 02-06-2011 03:36 AM

I'll take a CA valve. PM'ing

MaD 02-06-2011 03:50 PM

All the 12g kits are currently sold. I'll work on ordering more valve stems if there's interest. I also want to make sure everyone is happy with the o-rings and seals provided so please let me know what you think when you receive your kits.

wrongbloke 02-06-2011 05:58 PM

interested in a couple non-cart kits when you have them (really just the orings and seals). LMK if and when they are back in stock.

matteekay 02-06-2011 11:50 PM

Bah, always too late. I'd also be in for a non-cartridge valve kit.

Morhaughn 02-08-2011 11:38 PM

I'll take 4 ca valves if you still have them let me know

chl2onic 02-20-2011 01:17 AM

Still got 12g face seals laying around? I got a pt extreme that needs one in order to get another friend to be willing to play limited ammo, pump/ pistols only.

Plus I could keep come for just in case my beloved p68 ever wrecks one.


All times are GMT -4. The time now is 06:14 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC