mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Dealers Forum (http://www.mcarterbrown.com/forums/dealers-forum/)
-   -   FloryPB new year new ideas and the same ole goods (http://www.mcarterbrown.com/forums/dealers-forum/151869-florypb-new-year-new-ideas-same-ole-goods.html)

Paintballer50505 02-21-2011 10:18 PM

FloryPB new year new ideas and the same ole goods
 
Flory PB is expanding its product line for the new year. The new stuff will start coming out slowly. The main concept of my products is going to be compatibility and making things interchangeable, while still producing unique individual pieces.

Featured Special Item. I will be making non production parts and maybe guns throughout the year and will post new ones at the top of the thread. The idea behind these is to reward customer loyalty because there will be a discounted price for returning customers on these parts.

FloryPB is going black for fall. Just got back a run of polished black parts that I sent up to rainman to get anodized. he did a great job on the color I have never seen a deeper black anodizing then this. You know how some black looks purple this is not that black.

http://www.hunt101.com/data/500/medi...ackvalves1.jpg
4 black valves, still pick your ports. I have two flush valves and two bobbed valves

1 bobbed valve left!

Price $35 shipped
Price for returning customer $30 shipped

http://www.hunt101.com/data/500/medi...lackcrams1.jpg

Three cram and jams were done in this run, 2 cci crammers and 1 ccm crammer. (From left to right Angled Front CCi Crammer, CCM Crammer, Classic Front CCI crammer)

Price CCM Cram and Jam $50 Shipped
Price returning customer $45 Shipped SOLD!!!!!

Price CCI cram and Jam $45 Shipped
Price returning customer $40 Shipped

Only Angled Front crammer left!

Finally
http://www.hunt101.com/data/500/medi...blacktube1.jpg

A 12 round feedtube done with a classic nose and two long slots with other cosmetic milling.

Price $60 Shipped SOLD!!
Price returning customer $55 Shipped Sold!!

I know many have been asking about anodized parts, get your polished black parts now when you can I dont have plans setup to have another set of things anodized anytime soon.

This is under construction still

Paintballer50505 02-21-2011 10:27 PM

FloryPB Bobbed Valves have it your way variety
 
Bobbed valves are offered in stainless steel, polished aluminum, and brass. All bobbed valves are ported the way you wish.

http://www.hunt101.com/data/500/medi...1_16_06_24.jpg
(stainless steel bobbed valves)
http://www.hunt101.com/data/500/medi...1_16_19_49.jpg
http://www.hunt101.com/data/500/medi...1_16_20_00.jpg
http://www.hunt101.com/data/500/medi...823_213653.jpg

My standard bobbed valves can have any porting configuration you desire.
Price Aluminum: $20
Price Stainless Steel: $25
Price Brass: $30

New for 2011 flush mount bobbed valves. These valves sit flush with a cci trigger frame and offer an even smaller cleaner look without reducing any extra volume. These valves cannot have a side and rear port because their is not enough space you would need to pick side port(s) or rear port.

http://www.hunt101.com/data/500/medium/SBValveA1.jpg
http://www.hunt101.com/data/500/medium/SBValveA2.jpg
http://www.hunt101.com/data/500/medium/SBValveB2.jpg

Price Aluminum; $20
Price Stainless Steel: $25
Price Brass: $30

Paintballer50505 02-21-2011 10:27 PM

FloryPB Phantom one piece feedtubes and cci cram and jams
 
Just finished making the first run of cram and jams. They sit low on the body and fit the newer style tubes snuggly. Come with mounting screw which is the same as the screw used for the cci feed blocks. I can offer these in both raw polished aluminum and brass

http://www.hunt101.com/data/500/medium/fpbccicnj1.jpg
http://www.hunt101.com/data/500/medium/fpbccicnj2.jpg
http://www.hunt101.com/data/500/medium/fpbccicnj3.jpg
http://www.hunt101.com/data/500/medium/fpbccicnj4.jpg
http://www.hunt101.com/data/500/medium/fpbccicnj6.jpg
Three styles available currently.
Angled front
Classic front
Feyd Spike and the strange Feyd Spike

Cost:
Aluminum: $30 shipped
Brass: $40 shipped

These feedtubes are 10-12 round (can make smaller if desired) and are designed to be one piece with a very low profile. They are offered in polished aluminum and can be custom ordered in brass (no stainless yet guys). I have come up with some basic styles but no two tubes will be identical I have made these to be able to be made in small batches but still have each piece be unique. They include cci feedgates and the same 8-32 screw supplied by cci so replacements parts are very easy to get.


http://www.hunt101.com/data/500/medium/PIC_1474.JPG
http://www.hunt101.com/data/500/medium/PIC_1487.JPG
http://www.hunt101.com/data/500/medium/PIC_1476.JPG
http://www.hunt101.com/data/500/medium/PIC_1483.JPG
http://www.hunt101.com/data/500/medium/PIC_1479.JPG

Price Aluminum: $45
Price Brass: $90

Paintballer50505 02-21-2011 10:35 PM

FloryPB Sheridan odds and ends
 
FloryPB sheridan RVA's offered in Brass, Stainless, and Aluminum with one piece spring guides. All RVA's come with stainless steel screws


http://www.hunt101.com/data/500/medium/sva1.jpg
http://www.hunt101.com/data/500/medium/sva2.jpg
http://www.hunt101.com/data/500/medium/sva10.jpg
http://www.hunt101.com/data/500/medium/sva11.jpg
http://www.hunt101.com/data/500/medium/sva12.jpg
http://www.hunt101.com/data/500/medium/sva14.jpg

Price Aluminum: $15
Price Stainless Steel: $20
Price Brass: $25

FloryPB sheridan feedtube caps

These are made to match the velocity adjusters and I also offer a slimmer version of the stock cap. All caps have a cupped backing instead of a flat wall to be a little nicer with paint.

http://www.hunt101.com/data/500/medi...105_161944.jpg
http://www.hunt101.com/data/500/medi...105_161937.jpg
http://www.hunt101.com/data/500/medi...105_161954.jpg
http://www.hunt101.com/data/500/medi...105_161817.jpg
http://www.hunt101.com/data/500/medi...105_161904.jpg


Price Aluminum: $8.50
Price Stainless Steel: $10
Price Brass:12.50


FloryPB Feed Plugs

Under construction need some customer pictures for these

Paintballer50505 02-21-2011 10:42 PM

FloryPB Brass Sheridan Bolts
 
This is a work in progress at the moment.

These bolts have a modular two piece design. There will be individual bolt fronts for the different models of sheridans and universal bolt rears that will be offered in bolt action, standard pump handle, and custom versions.

Bolt fronts will be brass with all stainless steel hardware, all ball detents are plated (to prevent rust) magnetic ball bearings so they stay together and are hard to lose.

http://www.hunt101.com/data/500/medium/bpgpb3.JPG
http://www.hunt101.com/data/500/medium/florypb1.jpg
http://www.hunt101.com/data/500/medium/florypb3.jpg
http://www.hunt101.com/data/500/medium/florypb2.jpg

Price: not ready to sell just yet but pricing will range between $30-60 depending on combination ordered.

Paintballer50505 02-21-2011 10:50 PM

Reserved

Paintballer50505 02-21-2011 10:51 PM

Reserved 2

Paintballer50505 02-21-2011 10:53 PM

Policies
 
My Policies



Customers are now asked to provide pictures of your new merchandise because my picture taking skills are awful


All Prices include priority shipping with tracking inside the USA
I do not take money for parts that I have not produced. (no preorders here)
Shipping outside of the US will cost more (price will be determined based on location)
Shipping method is priority with tracking
Price posted includes shipping and any other fees for customers state side (what you see is what you pay)
If you are having and problems with my products contact me right away and I will do what I can to make it right
Please allow two to three days for finishing and shipping.


Feedback here http://www.mcarterbrown.com/forums/f...-feedback.html
Feedback PBN new PbNation - BST Feedback - paintballer50505

FloryPB

P.S. And remember all FloryPB products are mullet approved
http://www.hunt101.com/data/500/medium/diosmullet.jpg

Paintballer50505 02-21-2011 10:59 PM

Reserved for customer pictures

PM me your pics and I will post them in this post

http://img194.imageshack.us/img194/1498/1040050.jpg
http://img109.imageshack.us/img109/1998/1040047j.jpg
I8pie2Day's kp bolt action bolt
review
http://www.mcarterbrown.com/forums/m...p-bolt%5D.html


Custom Brass made for Chopper Duke
http://www.hunt101.com/data/500/medium/wraith1.jpg
http://www.hunt101.com/data/500/thumbs/wraith2.jpg
http://www.hunt101.com/data/500/medium/wraith5.jpg
http://www.hunt101.com/data/500/medium/wraith4.jpg
http://www.hunt101.com/data/500/medium/wraith3.jpg
Review
http://www.mcarterbrown.com/forums/m...ds-stocks.html


http://www.hunt101.com/data/500/medi...rassparts2.jpg
http://www.hunt101.com/data/500/medi...brassparts.jpg
matteekay's custom pgp with florypb pump handle, brass cocking rod, brass endcaps, and rva

Chaos 02-21-2011 11:45 PM

If you can make one of those Brass Bolts in a length for the PMI-1 then I want one!


Also any chance of getting a PPS Fasst Changer plug made out of Brass?


All times are GMT -4. The time now is 08:19 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC