mcarterbrown.com
 

Dealers Forum Paintball Dealer? Having a Special? Let us know here.

Reply
 
Thread Tools Search this Thread
Old 03-09-2011, 07:16 PM   #1 (permalink)
Ridiculous MCB Member
 
storminnorman's Avatar
 
Join Date: Dec 2007
Location: Pump Night

T2 Slot Blocker

I started this project because I was having fps issues with my T2 due to the hammer getting dirty from debris falling in lower tube while playing. I noticed when the bolt was closed in the firing position the hammer slot was allowing any debris to get onto the hammer, due to it being exposed and unprotected. I found anything that made its way into the lower tube through the exposed hammer slot, no matter what it was resulted in fps lost. I was told to remove my hammer, clean it,and dry it, then reinstall it. This did fix the problem but only temporarily until something else would make its way into the slot. This problem was a result of having such perfect tolerances between the hammer and the lower tube, which I love about the T2. I hated fixing this issue every time I got debris in the exposed slot though. So I called Ccm to get a solution and I was sent to Rod to get my answers. Rod liked my idea and said Ccm didn't have plans on producing something like this and it was okay if I made my part. I called many times and was given many helpful suggestions and information. I had started the project to build a piece that would protect the exposed hammer slot, and still retain the aesthetic look of the T2. I wasn't alone in making this part, I had help from Richard Black my engineer/machinist and friend. Rick took the design and put it to the cad program for me. I now have the T2 slot blocker made by one of our own machinist here on MCB. They come back from the machinist then the polished parts are put through three vibrating tumblers and then buffed with white, red, and blue rouge for a mirror shine. The dust finish and the anodizing is done at Chico's metals which is the same company Ccm uses so I can get the best match possible. The T2 slot blocker is proudly made in the USA , and it is a world wide product. The T2 slot blocker works to keep your slot clean so you don't have to.

Past Issues:
I have had one problem with the screws that I bought for the slot blocker and that is that they were about 3/16 to long in some T2's but not all of them. I talked to Rod about this and he says its because the first run of T2 pump rods were not tapped as far in as the newer T2's are. So all screws are Torq heads and cut to the right length so there will be no issue.

WARNINGS:
Installing the slot blocker does not void your ccm T2 warranty. However ccm will not cover any parts under the warranty due to issues caused by the slot blocker, but will still continue providing warranty to the rest of your marker.

WHEN INSTALLING THE SLOT BLOCKER ON THE T2 MAKE SURE THAT YOU DO NOT OVER TIGHTEN THE SCREWS. THIS WILL CAUSE BINDING AND OTHER NEGATIVE ISSUES. IF YOU HAVE ANY ISSUES OR CONCERNS PLEASE CONTACT ME RIGHT AWAY. ALSO IF THE SCREW'S DON'T TIGHTEN DOWN ALL THE WAY DO NOT TRY TO FORCE THEM YOU MAY NEED A SHORTER SCREW/S PLEASE CONTACT ME RIGHT AWAY.

Pictures:







I have 1 gloss black T2 Slot Blockers that come with two new screws and will be $36 paypald and shipped. Shipping is included anywhere in the continental United States. Shipping quotes for outside the continental United States can be acquired by contacting me via personal message. Shipping to Canada just add an extra dollar.

I have 0 gloss Silver T2 Slot Blockers that come with two new screws and will be $36 paypald and shipped. Shipping is included anywhere in the continental United States. Shipping quotes for outside the continental United States can be acquired by contacting me via personal message. Shipping to Canada just add an extra dollar.

I have 31 dust black T2 Slot Blockers that come with two new screws and will be $32 paypald and shipped. Shipping is included anywhere in the continental United States. Shipping quotes for outside the continental United States can be acquired by contacting me via personal message. Shipping to Canada just add an extra dollar.

I have 14 dust silver T2 Slot Blockers that come with two new screws and will be $32 paypald and shipped. Shipping is included anywhere in the continental United States. Shipping quotes for outside the continental United States can be acquired by contacting me via personal message. Shipping to Canada just add an extra dollar.

I have 2 raw T2 slot blockers that come with two new screws and will be $28 paypald and shipped. Shipping is included anywhere in the continental United States. Shipping quotes for outside the continental United States can be acquired by contacting me via personal message. Shipping to Canada just add an extra dollar. The raw ones must be anodized before being installed. There can be some rough edges were the slot blocker meets the T2 on the raw model that will damage your T2 if not smoothed out so again, DO NOT INSTALL WITHOUT ANODIZING. CCM NO LONGER OFFERS TO ANODIZE ANY PART FROM ANY OTHER MANUFACTURER WHEN ORDERING A NEW MARKER.


Please pm me for payment information, please have your finish and what model marker its for in your pm. Your payment secures your slot blocker.



Testimonial's:

Video:
YouTube - Mopeds Magic Cover

Torture test:
This T2 was put through hell by a snake player on pump team Total Grief. You all know him as Cody Skullet Ross.

Now I was told he gets the dirtiest but this is ridiculous.

He sent me this picture of his T2 after a day of play in St Louis sand/mud is the best way to describe whats on it and all over it. I was told the trigger doesn't even work right but the the lower tube is clean and there is no fps loss.

Greg Hastings has also let me know that his slot blocker "Works great".


There is a review thread for more and feel free to add more.
T2 Slot blocker reviews

INSTRUCTIONS FOR INSTAllATION OF THE T2 SLOT BLOCKER
created for the T2 Paintball Marker Enclosed : T2 Slot Blocker and 2 Screws
INSTALLATION INSTRUCTIONS
1. Remove stock T2 sled torque screws. Check pump rod threads for old debris or loctite.
2. Align slot blocker with the flat end facing the T2 sled, with the curved end facing the back of the gun.
3. There are two curved areas or radii cut into the slot blocker. Make sure the larger radii of the slot blocker faces down and the small radii faces up. IF this is placed incorrectly, you will cause the slot blocker to drag on the body.
4. Prepare the new longer torque screws included with the slot blocker using blue Loctite. Only the ends are to be coated in blue Loctite as if you were doing it on the stock T2 sled screws for installation.
5. Ensure all parts are straight, and free of binding,or rubbing. Tighten down screws adequately, make sure all parts remain properly aligned.
6. Test by pumping to make sure there is no contact of the slot blocker with the body.
7. Go play some paintball with your T2 and now your slot will not get dirty! (c) Mike Pederson 2011

Last edited by storminnorman; 04-12-2014 at 09:21 AM.
storminnorman is offline   Reply With Quote
Old 03-09-2011, 08:34 PM   #2 (permalink)
Mind Detonator
 
ApoC_101's Avatar
 
Join Date: Aug 2007
Location: Vancouver, BC

Excellent work. every T2 owner should have one of these... exposed internals suck!
ApoC_101 is offline   Reply With Quote
Old 03-09-2011, 08:45 PM   #3 (permalink)
HI = A Pumper's Paradise
 
808raoul's Avatar
 
Join Date: Apr 2008
Location: Aiea, HI
Send a message via AIM to 808raoul

AKA Fan
These look awesome. I wouldn't mind getting one (gloss). I'll PM you storminnorman.
__________________
MCB Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html

Anybody gots to sell:
-Line SI Bushmaster Pointman handle
-Racegun Halfblock Backblock (newer ver.)
808raoul is offline   Reply With Quote
Old 03-09-2011, 08:53 PM   #4 (permalink)
Ridiculous MCB Member
 
storminnorman's Avatar
 
Join Date: Dec 2007
Location: Pump Night

No one likes a dirty slot lol. Thanks for the comments

Last edited by storminnorman; 03-09-2011 at 08:58 PM.
storminnorman is offline   Reply With Quote
Old 03-09-2011, 08:54 PM   #5 (permalink)
Rec Poster
 
Join Date: Jan 2010
Location: Lynnwood, WA

CCM Fan
I PM'd you storminnorman.
XeNoX is offline   Reply With Quote
Old 03-09-2011, 08:57 PM   #6 (permalink)
Ridiculous MCB Member
 
storminnorman's Avatar
 
Join Date: Dec 2007
Location: Pump Night

pmd back
storminnorman is offline   Reply With Quote
Old 03-09-2011, 08:57 PM   #7 (permalink)
Back to PUMP!
 
MattyLAW's Avatar
 
Join Date: Oct 2010
Location: 518 UpState, NY

CCM Fan
I want one, PMing you please get back to me as soon as you can with the paypal addy

Dust black please
__________________
TrashTalk Paintball: est. 2005 woods/scenario
Albany's 518th Brigade, WestPoint MVT Fall 2010
CCM J12: best pump in the world!!!
Vicious Ego10 and Geo3
www.TrashTalkPaintball.com
MattyLAW is offline   Reply With Quote
Old 03-09-2011, 09:02 PM   #8 (permalink)
Ridiculous MCB Member
 
storminnorman's Avatar
 
Join Date: Dec 2007
Location: Pump Night

pmd
storminnorman is offline   Reply With Quote
Old 03-09-2011, 10:10 PM   #9 (permalink)
Active Member
 
Join Date: Dec 2010

Pmd u but forgot to say I was in Guam 96929 us address on base though
dukduk is offline   Reply With Quote
Old 03-09-2011, 10:16 PM   #10 (permalink)
The Man With No Plan
 
super_stanchy's Avatar
 
Join Date: Nov 2008
Location: Oregon City, OR

CCM Fan
PBN Fan
no silver

hmmmm
super_stanchy is offline   Reply With Quote
Reply

  mcarterbrown.com » Buy, Sell, Trade » Dealers Forum

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 07:05 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC