Buy, Sell, Trade

[spankopotomous]

Originally Posted by y0da900

Yes, Vibe internals are the same as the XE. Material arrived for that version this week, hoping to get those at least part way finished this weekend.

Lmk when its ready I have a vibe, and I reaaaaaly wanna test this

[Leafy]

Mine is cursed, so far I've killed 2 boards and now blown out 2 QEV's for totally unknown reasons. I also have the old style back cap that doesnt require cutting but occasionally shoots off the back and hits you in the face. This new cap setup is much better. When I had it working irrc I shot a hopper out of a couple hundred psi from my 70/45, with a slight leak cause I kinked a hose installing it. I like it, shoots good, totally worth the 75 bucks.

[BMayo713]

If I still ha my ion I would love to have this...alas I gave it to my cousin so he could have a "real" gun...this was back in my tourney baller phase.

[Tyler_vanvoorthuijse]

Got mine a few days ago... I'm using a lucky can, and a mech setup. I solved the need for a force feed issue by milling the feedneck hole wider. I also keep blowing the doughnut off the can. I've tried more or less everything, but I think I'm gonna have to drill and tap the doughnut for a set screw or two like the old lucky doughnut so it won't keep blowing off. lol. In future models, I suggest doing that stock.

[y0da900]

Tyler, are you putting the snap ring into that groove in the donut before sliding it on? That's the reason that there is a cutout in the side of it, so the snap ring can be installed and accessed for removal with snap ring pliers. The older version did use set screws, this should be a much more reliable setup.

[Tyler_vanvoorthuijse]

Ok, got a snap ring (had to stretch a 5/8th cause the Lowes by me didn't have 11/16th) fitted on and now she shoots BEAUTIFULLY with no leaks at all. I can't wait to show her off at D-Day!

Pic of the finished product:

Vibe Shell
lucky firing can
ndz breech
wooden dowel fore-grip wraped in duck tape (gotta love it)
Palmer's female Stabilizer.

[y0da900]

Thanks for the update Tyler, definitely a cool looking setup. Vibe bodies are pretty nice looking, especially with a contrasting firing can like you are using.

What kind of pressure are you running?

[Tyler_vanvoorthuijse]

Not really sure, as I don't have a gauge on the stabilizer, but its REALLY low on its range as you can see by the almost totally backed out nut. I should really invest in a LP kit for the stabilizer.

[y0da900]

Most of them seem to run right around 100-110 psi using an Ion can (as in not devolumizing like an Epiphany).

[chadders]

question, could one of thease be set up for the 50 cal vibe? the micro as i want one for an rc tank project im building + closed bolt is so fun