mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Dealers Forum (http://www.mcarterbrown.com/forums/dealers-forum/)
-   -   New "FURIOUS" Harness for ICD guns (http://www.mcarterbrown.com/forums/dealers-forum/168559-new-furious-harness-icd-guns.html)

Nobody 07-12-2011 07:44 AM

New "FURIOUS" Harness for ICD guns
 
Have problems with your wiring harness? Those wires starting to break when you look at them funny? Well, have no fear, you can replace those tired old wiring harness with brand new parts.

Welcome all, to the brand new beginning of the "Furious" harness. Bring a little fury to the field.

http://i290.photobucket.com/albums/l...9/101_0278.jpg

Orders will be submitted via post, with a PM conformation

All harnesses will come with 1 LED(colour of your choosing), 1 microswitch, 1 on/off(for blind harnesses), 1 set noid QDs and 24g wire.

Wire Lengths: (measured from crimp to part)
4" for the noid
2.5" for microswitch
2.5" for LED
3" to the on/off

copy this for the order, adding and subtracting what you want and don't want for each harness. please make note of multiple harness orders
Style: B2K (BKO is the same as B2K, working on PM and FS harnesses)
wire length and size: standard length (you can choose to have any wires shortened or lengthened for your need) & 24g or 22g wires
LED colour: (see below for colours)
QDs: only have Deans Micro for noids(others coming) and where you would like them, on the noid wires, micro switch, etc. if you can't solder and would like the QDs, you will have to send me the noid
PDS: yes or no - not available yet
battery connector: hard plastic or soft
notes:

Copy and paste this order form in the post
example:
Style:
wire length:
LED:
QDs:
battery connector:
notes:

example:
Style: B2K
wire length: standard / 24g
LED: Blue
QDs: on noid
battery connector: hard plastic
notes: USPS w/ delivery confirmation


Blind Harness Price: $25 shipped

PDS Harness Price: TBA

custom orders will be priced accordingly, depending on your requests

SUPER SAVER
You can send your harness in, to reuse the parts off your harness(microswitch, on/off, LED, battery connector or any combination of your old and new parts ), but with the thicker wires, and new bus.

Price: $12 for complete use of all your parts, add the individual prices below for the mix and match.

example: if you need a new on/off switch, add in $3 to the $12 for the Super Saver, at a total of $15 shipped.

individual pricing for parts:
micro switch(25 gram) - $3
http://i290.photobucket.com/albums/l...s/101_0273.jpg
on/off - $3
http://i290.photobucket.com/albums/l...s/101_0272.jpg
battery connectors - $2
hard plastic:
http://i290.photobucket.com/albums/l...s/101_0275.jpg
soft plastic:
http://i290.photobucket.com/albums/l...s/101_0274.jpg
LEDs(5mm unless noted otherwise): all colours - $3 each
sunset orange:
http://i290.photobucket.com/albums/l...s/101_0266.jpg
brilliant green (this is a clear water LED, not the old stock green LED)
http://i290.photobucket.com/albums/l...s/101_0267.jpg
yellow (yellow LED body- like the green stock LED)
http://i290.photobucket.com/albums/l...s/101_0268.jpg
red:
http://i290.photobucket.com/albums/l...s/101_0269.jpg
blue:
http://i290.photobucket.com/albums/l...s/101_0271.jpg
white:
<picture coming>

PDS transmitter:(not available yet)
<picture>
PDS receiver: (not available yet)
<picture>

eye holders: (not available yet)
3mm or 5mm
<picture>

ShockTech eye holders: (not available yet)
<picture>



https://www.paypalobjects.com/en_US/...ation_seal.gif
preferred payment method paypal: nobodylovesu@hotmail.com
can and will accept M.O.s, but will ship after payment is received.

shipping will be USPS, unless you would like a different delivery service (UPS, FedEx, carrier pigeon, Pony Express, Messenger Yak, you get the picture)
add $1 for Delivery Confirmation

please feel free to ask any questions, the worst i can say is no.

Supergyro 07-12-2011 09:54 AM

Still think the "Err'body" harness would have been a good name. =)

Nevit 07-12-2011 11:26 AM

I am greatly looking forward to the PDS harnesses! I have 2 promasters and 2 custom projects that use promaster boards. Can you provide leads from the board connector where we can solder in our own PDS wires for the time being?

I would also be interested in a few of the male and female noid QD fittings.

Nobody 07-12-2011 04:06 PM

Quote:

Originally Posted by Nevit (Post 1913828)
I am greatly looking forward to the PDS harnesses! I have 2 promasters and 2 custom projects that use promaster boards. Can you provide leads from the board connector where we can solder in our own PDS wires for the time being?

I would also be interested in a few of the male and female noid QD fittings.

not following the question? do you want the leads and parts, for an already existing harness? if i read you right, then it wouldn't be a problem on the parts. i will have(when parts are ready) wires crimped, on/off and eyes made up as a drop in, but you would have to solder on the one lead from the eyes and the one lead from the on/off to the microswitch. that makes it just a bit complicated. if i where to do that, i will provide a short diagram for people to do their own soldering.

i am working on the PDS, but the Promaster PDS is easier to deal with than a B2K harness.

i do need to get more pictures of the QDs and the harness its self(forgot about that :rolleyes:).

jtusa181 07-17-2011 09:45 PM

Free up

Nobody 07-26-2011 05:29 AM

front page news

Nobody 08-12-2011 01:59 AM

life on top

Myrkul 09-04-2011 08:32 PM

Pm in bound.

Nobody 09-22-2011 05:36 AM

still kicking it retro style

Nobody 11-06-2011 01:28 AM

now have test harnesses with alligator clips. so you can check out boards, noids or even LEDs, without having to take out a harness out of a gun.

$10 shipped


All times are GMT -4. The time now is 07:05 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC