Buy, Sell, Trade

[dukie]

just so there are no questions later:



everything goes together just fine

[dukie]

All but the 4 going to tonsixers shipped. These are:


jeebus
cjottowa
mayvik
dm6rocker

Edit one is not going to tonsixers, my bad

[dukie]

I have 4 SLIDE & FRAME combos left to sell:

2 Vertical feed slides
2 right feed slides ( GONE)

3 Dust black frames ( 2 gone)
1 raw frame

(1) of the dust black frames is missing the bucket from the bucket changer. If you already have a bucket to use in its place I can send you a dust black bucket when I do my next batch of anodinzing. If you do not I can include a standard gloss black bucket.

$480 for each set + expedited shipping (25 canada, 30 usa )

PM me if you want to order one combo of your choosing.

I will not seperate the frames from the slides.

There will be 4 more vertical slides available later when I have a chance to finish them off.

first come first serve.

[honculada]

I'll take a right feed slide and dust frame combo.

[dukie]

Updated the first post with

ASSEMBLY VIDEOS FOR THOSE WITH RAW FRAMES

You can also use them for dissassembly and reassembly if you need it.

[dukie]

Originally Posted by Mayvik

I'm confused by the videos. When you say the shoulder is a boot flush, what does that mean? Is that some kind of poker terminology?

remove head from arse or stop puckering so much. its effecting your hearing.

oh and I fixed the first link. I left out the trigger install video

[dukie]

Originally Posted by Mayvik

Lookin' good! Have you found the loctite to be critical to keep things from backing out of their own accord? Not a huge fan of using it unless it's really needed (my sissy arms have a harder time getting stuff apart again).

blue is really easy to work with, even girly arms can turn those screws

[Mayvik]

Originally Posted by dukie

blue is really easy to work with, even girly arms can turn those screws

Let me rephrase. My girly arms that are currently bedridden in a cancer ward?

[dukie]

Originally Posted by ironchef97

Aw I want a right feed slide, any chance you'll be machining one of those soon?

i just started machinig dsg's so it wont be for a while at least.

[tiny]

I believe someone (Mayvik or Chopper Duke? The post got deleted so I have no idea...) asked if the DSP frame would work with a duckslide:



Honestly, it's like Dukie made the frame for use with the slide. I'm not sure if it is slightly wider than the standard phantom frame or what, but before the DSP frame the pump stroke on the slide was sloppy and had a dissapointing amount of side to side play. It is now much better but is not so tight that I would be concerned with scratching/binding. I did put a bit of lube on the contact areas just in case but I'm extremely happy with the combination so far.

edit: The screw for the grip panel is missing because I can't find it, there are no issues with grip screw clearance that I have encountered :P