mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Dealers Forum (http://www.mcarterbrown.com/forums/dealers-forum/)
-   -   Voodoo coatings thread (http://www.mcarterbrown.com/forums/dealers-forum/187383-voodoo-coatings-thread.html)

VooDoo_Coatings 01-05-2012 04:16 PM

Voodoo coatings thread
 
Not Accepting New Orders

russc 01-05-2012 04:25 PM

Nifty...

http://a8.sphotos.ak.fbcdn.net/hphot...41093043_n.jpg

B.R. 01-05-2012 05:27 PM

is it possible to mask areas off or is it all or nothing?
like a camo outside w/ the drylube inside on a phantom.
also is multicam possible?
thanks!

VooDoo_Coatings 01-05-2012 08:04 PM

Quote:

Originally Posted by B.R. (Post 2152359)
is it possible to mask areas off or is it all or nothing?
like a camo outside w/ the drylube inside on a phantom.
also is multicam possible?
thanks!

Yes, it is possible to using masking with both coatings. We use masking daily to protect sensitive areas on parts and/or to make camo patterns such as ACU or Multicam.

VooDoo_Coatings 01-05-2012 08:54 PM

Quote:

Originally Posted by russc (Post 2152266)

Also, this photo shows a often overlooked component that can benefit from the Dry Film Lubricant coating, the springs. Some springs when compressed will rub against other parts creating drag. Both the Dry Film Lubricant Coating and the Cerakote finish are very flexible and can be applied to springs. In fact we have coated pieces of foil here in the shop that we let customers wad up and flatten back out to demonstrate the durability and flexibility of the coating.

Jebus 01-05-2012 09:44 PM

I think I'll be sending a gun or two your way if you can do multi can. What would be a rough quote for an 06 black magic pump, and a boxgun?

VooDoo_Coatings 01-05-2012 09:59 PM

Quote:

Originally Posted by Jebus (Post 2152709)
I think I'll be sending a gun or two your way if you can do multi can. What would be a rough quote for an 06 black magic pump, and a boxgun?

Multicam is no problem. In fact we are doing a few runs on it next week and the week after so if you can get it in pretty soon I can run it with those orders. As for the price on the work I will send you a PM. If you have any questions or concerns just let me know.

Cnyberg 01-05-2012 10:06 PM

This is very cool! Definitely going to keep an eye on this.

Marathon 01-05-2012 10:32 PM

Very interesting.

The guns shown in the gallery all seem to be a dust (flat) finish. Do you offer any finishes in a gloss finish?

VooDoo_Coatings 01-05-2012 10:51 PM

Quote:

Originally Posted by Marathon (Post 2152774)
Very interesting.

The guns shown in the gallery all seem to be a dust (flat) finish. Do you offer any finishes in a gloss finish?

Sorry Cerakote is only available in Matte and Satin finishes. However we are looking into getting a oven cured Cerakote clear made so we can achieve high gloss finishes.


All times are GMT -4. The time now is 10:26 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC