|Dealers Forum Paintball Dealer? Having a Special? Let us know here.|
| ||Thread Tools||Search this Thread|
|03-22-2012, 01:34 PM||#1 (permalink)|
2ND run DSP air thru frames - MOD approved
This is the SECOND sales thread for the DSP air in grip frame.
Shown in the following photos but NOT included are:
Custom, TonSixer anodized DSP frame - close match to CCI's "dust slate".
Click images to open larger versions.
pics ( new production photos to be up shortly):
Installing the trigger / trigger pull adjustment
DSPInstalltrigger.mp4 video by duke737 - Photobucket
Installing the transfer port
DSPInstalltransferpin.mp4 video by duke737 - Photobucket
Installing grip adapter dowels
DSPinstalldowels.mp4 video by duke737 - Photobucket
Installing the port plug
DSPinstallplug.mp4 video by duke737 - Photobucket
DSPAssembly.mp4 video by duke737 - Photobucket
...AFTER THE LOCTITE HAS DRIED:
You can adjust the transfer port and the loctite will continue to seal it up. Assemble the frame with the rest of your phantom parts. If the frame will not sit flush with the body your transfer port is not in the transfer hole in the valve body or it isn't screwed into the frame enough. It ony needs very light contact with the oring in the valve body to seal.
Gas it up.
If it leaks, you need to screw the transfer port in further. if it does not charge the valve, or if you can hear it squeaking instead of charging up the valve unscrew the transfer port. It is 32/tpi so it moves 1/32" per full turn. use small adjustments to fine tune. You can get to the hex head in the transfer port by removing the ASA and inserting an allen key inside the air passage.
If it just will not seal up, the oring is missing from the valve body, or you didn't get a god enough seal with the loctite. The loctite is very forgiving. I would suspect adjustment or a missing oring.
FOR THOSE NOT USING STOCK PHANTOM INTERNALS
Trigger adjustment - if DSP fires on pumping forward
DSPAdjusttrigger.mp4 video by duke737 - Photobucket
If it will not fire after pumping you will need to shorten the trigger stop pin located inside the spring behind the trigger. That will make for a longer trigger pull though.
Last edited by dukie; 05-02-2012 at 08:00 PM. Reason: formatting 'cause I'm a layout savant + added new photos of custom ano'd frame
|03-22-2012, 03:47 PM||#3 (permalink)|
No thats fine, leave them there. Yours looks beautiful, but I didn't want to post up photos of a different color to confuse people in the opening post.
You had better be coming to castle so that I can see that in person! If I ever do one for myself I would likely go that color. As it stands I get to keep the scrap ones lol.
format nazi! ( I knew you were going to do something)
|03-23-2012, 12:40 AM||#6 (permalink)|
Mmmmmm sexy slate. I might have to make myself a slate toy next time around.
Yeah I think I will rarely see pp as that's when dwaynes little guys birthday usually lands. I'm debating on pump castle though.
|03-23-2012, 11:18 AM||#7 (permalink)|
great pics as always CJ.
I went up to edit and type in the NOT includes of the valve internals and panels but you already did that lol.
|03-27-2012, 06:13 PM||#8 (permalink)|
Moving on up from page 2....
Nobody in a rush to spend their tax return this year? Lol
Material purchased and in the van!
|Thread Tools||Search this Thread|