mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Dealers Forum (http://www.mcarterbrown.com/forums/dealers-forum/)
-   -   Screw Kits and Cocker Parts Kit (http://www.mcarterbrown.com/forums/dealers-forum/225316-screw-kits-cocker-parts-kit.html)

maggot 02-03-2013 08:44 PM

Screw Kits and Cocker Parts Kit
 
Universal Screw Kit. These are high quality YFS screws in both stainless and black. Great for cockers and mags, but will also be useful for all markers. Includes: 4x ASA screws, 4x ASA plugs, 4x beavertail screws, 4x trigger frame screws, and 6x grip screws in two different thread sizes. A total of 96 screws!
$24 shipped (I will ship overseas, PM me for a quote).
http://www.otterpaintball.com/wp-con...ws-150x150.jpg


-------------------------------------------------


Autococker Parts Kit. This is a brand new Autococker parts kit that every Cocker owner should have. The following is included (everything pictured):
1x complete Autococker o-ring rebuild kit
1 sear pin to hold your sear in place
1 vertical ASA screw
1 valve jam nut
1 valve guide screw
4x set screws for timing rods (2 each of the two different sizes)
1x beavertail washer
8x trigger frame and beavertail screws (4 in stainless and 4 in black)
1 foot section of high quality black pneumatic hose - max pressure of 250 psi (more than twice the working pressure of an Autococker)
$18 shipped (I will ship overseas, PM me for a quote).
http://www.otterpaintball.com/wp-con...ts-150x150.jpg


-----------------------------------------------


Autococker Hose Kit. A total of 12 feet of high quality pneumatic hose with a max pressure of 250 psi (more than twice the working pressure of an Autococker).
The following is included (everything pictured): 12x 1 foot sections of hose (2 clear, 2 black, yellow, blue, red, green, ice blue, ice green, ice red, ice yellow)
$12 shipped (I will ship overseas, PM me for a quote).
http://www.otterpaintball.com/wp-con...se-150x150.jpg


------------------------------------------------


ASA Screw Kit. These are high quality YFS screws in both stainless and black. Includes: 4x ASA screws and 4x ASA plugs. A total of 40 screws!
$15 shipped (I will ship overseas, PM me for a quote).
http://www.otterpaintball.com/wp-con...ws-150x150.jpg


---------------------------------------------


Grip Screw Kit. These are high quality YFS screws in both stainless and black. Includes: 6x grip screws in two different thread sizes. A total of 48 screws!
$14 shipped (I will ship overseas, PM me for a quote).
http://www.otterpaintball.com/wp-con...ws-150x150.jpg


----------------------------------------------


Introducing the all new Super Light Pump Stroke (SLPS) spring kits. These lightened springs will reduce the amount of force needed to re-cock your pump or Autococker. A lighter pump stroke means more accurate follow up shots and auto-triggering. These springs are significantly softer than any of the springs found in the other spring kits.
How do they work? The key to the system is the lightened valve spring. A lighter valve spring means less force necessary to push the valve open and release the same amount of air. Since less force is needed, you can also use a lighter hammer spring which results in less force needed to re-cock.
You no longer need to purchase an expensive set of new internals to lighten your pump stroke. During my testing the biggest gains resulted on markers using stock WGP internals! Markers using stock internals had 20% to 25% reductions in the force needed to re-cock. You may even see gains in markers using high end internals. For instance, my sniper with an AKA valve and the very light yellow hammer spring had an 11.5% reduction in pump stroke using the SLPS spring kit.[/SIZE]
What is included: a brand new SLPS spring kit with replacement valve and hammer springs.
You need an Autococker valve tool to install the kit. You can purchase one here for $12 if you don't already have one: WGP Auto Cocker Valve Tool [WGPvlvtool] - $12.00 : Celanis Paintball, Online Store
Installation: Install the SLPS valve and hammer spring. If you are unable to achieve the desired FPS using this spring, re-install the stock hammer spring and leave your IVG most of the way backed out. Lowering your input pressure will often improve efficiency and help you achieve the proper FPS.
Note: the proper term for cocker pumps is snipers. Snipers are not to be confused with the new Empire sniper which uses a Spyder style valve. These springs will NOT work on Empire Snipers or Trilogy series Autocockers.
$12 shipped (Only $10 for each additional kit!)
http://www.otterpaintball.com/wp-con...PS-150x150.jpg


----------------------------------------------


These are brand new pre-98 Benchmark double finger sliders (no internals, but they do have the grip screws and set screws) in Gloss Red, Gloss Green, Gloss Blue, Gloss Purple, and Dust Black (I have a few in each color).
I bought out all the remaining stock of PTP's double finger sliders. They have no more, and won't produce any more... so this is your last chance to get one! They are new old stock and have spent their life in the thick plastic bags, still some may have minor shelf wear. As a side note, these actually work great as single finger trigger frames too. If you are looking for double trigger shoes, they are available here: double trigger shoe | eBay
$20 shipped each!
http://www.otterpaintball.com/wp-con...86-150x150.jpg
Optional add-ons
Grip frame mounting screws: $1
Benchmark grip panels: $3
Benchmark wrap arounds: $5

http://www.otterpaintball.com/wp-con...21-150x150.jpg


---------------------------------------------


These are custom made thick Delrin .45 grip panels. These 45 grips are CNC machined by a local Illinois machinist from ¼” thick delrin plates. This is real Delrin, not a cheapo knockoff. They are both tough and lightweight. My grips are thicker than the CCM panels are, and conform to your hands better. If you are unsure if they will fit your gun’s trigger frame, post a good picture here and we will tell you. They will fit most Autococker, Automag, Ion, and Spyder frames + more. If you are using unusually large trigger frame screws, such as 10/32, you will need to drill the holes wider just a bit. Being custom made, they have character. I used them for a full day of play recently and the smooth tops develop kind of a marbled look. They look awesome!
Price: $15 shipped per set of grips.
http://www.straightupcigars.com/wp-c...13-150x150.jpg
http://www.straightupcigars.com/wp-c...07-150x150.jpg
http://www.straightupcigars.com/wp-c...10-150x150.jpg

maggot 02-07-2013 10:48 AM

Got a couple sold. Bump!

maggot 02-19-2013 02:46 PM

Back to that top

maggot 03-13-2013 10:16 PM

bump!

maggot 04-04-2013 11:44 AM

bump!

D3adpool 04-08-2013 09:29 PM

Does the AC screw kit come in black as well? If so, I'd like a kit!

Pm me your details.

maggot 04-08-2013 09:31 PM

The universal screw kit (great for cockers) comes in black or stainless.
The Autococker specific kit comes only as pictured with a mixture of black and stainless parts.
I'll PM you. Thanks for the interest!

maggot 04-24-2013 09:58 AM

Might as well bump this one too ;)

maggot 05-06-2013 11:49 PM

I've revamped the screw sales, check out the new options!

Magoo 05-07-2013 10:07 AM

Do you know if the o ring kit work on an ANS GX3? I'm trying to build a GX3 body kit up, and I'm noticing some of the rings seem to have slightly different sizes.


All times are GMT -4. The time now is 04:36 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC