Hammer7 Stock Class Feed Blocks.***DISCONTINUED **
Finally got these down to a science when it comes to making them. They are cram and jam, use the stock mounting bolts. They can also be reversed and take phantom feed tubes.
One thing... this is THEdesign. There is no room for rails on the top, and I won't be changing the idea around to much. They are a bit a pain to make.
- $40 shipped.
The other way obstructs the screw to rotate the breach.
Will a speed wheel still fit? (with it pointed back of course..)
I'll take one!!
What's yer PP?
Jebus pm me for that....
Also, these are made to order so like a week turn around time depending on material that is in stock.
That is beautiful. I need to scrounge up $40!
I roughly measured the distance from my speed wheel to the start of the feed neck area and got .100". Looks like there is some over hang that may effect my wheels.
Yeah I am coming up .125 over where the rail normally would be for the feed port.
Is it necessary to have the over hang?
Don't fret though I have thumb screws on order that will fit... figure +$5 to include that
|All times are GMT -4. The time now is 05:44 PM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC