Custom handmade leather holsters

Butch · 04-08-2006, 03:21 AM

Not sure which catagory this should be in, so if I put this in the wrong one, please tell me and I'll take it down ASAP.

PICS added from KP's site 2/24/07 On a sidenote, I'm not sure how to size, so if anyone can tell me how to make it all uniform I'd appreciate it.

This was a holster I made. I did not make the belt, though this is that a western rig looks like.

Sorry for so many pics, just trying to show off my work.

If this is wrongly posted please shoot me a Pm, Thanks.

These prices reflect me learning a bit more about my own abilities time constraints and such. These do not affect the current projects I'm working on. These prices are for rough estimates and such. Nothing more nothing less. I will be basing all prices off of this. The holster pricing reflects any pistol type marker, though the holster itself will be built around your specific one. All purchases will have 6 coats of clear coat applied before being sent, along with a small amount of leather clear coat/conditioner and directions for leather care and where to get the conditioner.

Plain holster, includes the following: (See wolf holster)
Dye color of your choice
quick release strap (if doable) using snap.
Belt loop

-$50

Low rider holster (attaches to users own belt): (See Pug holster)
Dye color of your choice
quick release snap strap if doable
Allows adjustment for how high or low the holster sits.
wrap around leg strap to minimize "bounce"

-$80

Western style holster and belt rig (See western looking rig)
(attaches to specific belt included)
*Requires person for sizing and exact height or holster placement
Dye of your choice
Quick release snap strap if doable
Wrap around leg to minimize "bounce"
Loops on belt sewn to fit either 12 grams or 10 rd tubes. 12 loops.

-$125

Tactical holster (see Umbrella/ spiky holsters)
Optional ALICE clip system
Dye of your choice
Quick release strap if doable
Leg support straps to keep tight to leg and eliminate "bounce"

-$140

Shoulder holster (See shoulder harness)
4 points of adjustment for nearly any user
6 angles or possible adjustment for the marker
Quick release snap strap if doable
Holster "cap" to reduce friction on marker
Dye color of your choice

-$150

Scabbard- think army of darkness/mad maxx

-Priced by quote. Options below can be applied.

Armor- By quote only. Options below can be applied.

Belts- By quote only. Options below can be applied.

Wallets- By quote only. Options below can be applied.

Other- By quote only. Options may be applied.

These are extra options that can be added for the pricing listed.

*Lacing (replaces lock stitching)- $1 for every inch laced around the edge. Price of this cannot be determined until marker has been recieved. This is strong, but mainly for cosmetics.

*Pouches for 12 grams- $5 per 12 gram in pouch. This has a snap flap.

*Loops for 12 grams or 10 rd tubes $2 per loop.

*Tooling:
2" by 2" or smaller are $25
2" by 2" to 5" by 5" are $50
5" by 5" to 10" by 10" are $75
Larges by quote. Prices reflect time put into designing the image, transfering to leather, carving, and tooling time. This is a long process and thus the pricing.
** This tooling price does not reflect border tooling now basketweaves.

* basket weave tooling is $1 for every 1" by 1"

*Border tooling (barbed wire as of 8/31/06) is $1 for every 2" of edge.

Prices do not reflect shipping. However if an order gets beyond $200 I will cover shipping.

Whew, sorry about that. If there are any questions or comments please feel free to PM me. Thank you and have a nice day

-Butch
Updated 3/25-07

PS I would like to thank Dave Seley as well as KP customs for the pictures

shartley · 04-08-2006, 07:43 AM

Very nice work. I like the leg strap design.

mark · 04-08-2006, 01:52 PM

Your holsters make me want to buy a pistol, just so I can buy one.

Cleric · 04-09-2006, 03:20 PM

Very nice looking. Have you made one of your tactical rigs yet for a Squall? I have a 'Phoon setup with a 15 round spring fed magazine and vertical ASA with the 12 gram changer mounted. Have you any ideas for something along those lines.

Butch · 04-09-2006, 04:54 PM

Shartley- Thanks that means alot coming from the stock class Guru

Mark- Thanks man, always nice to hear shtuff like that

Cleric- I can't say as i have done a holster for a squall, in fact have only done my Sydarm a 3774 (I think thats the name...) and a customized PGP. I am positive I can make a holster for any sized marker you'd want, I would need the gun to work with however.

Butch · 04-13-2006, 12:01 AM

I am willing to take trades, preferably the brass kind, or anything that catches my eye.

I can tool the following:

Skull & crossbones
Anarchy symbol
yin/yang
skull
rose
celtic knot

Pretty much anything you can come up with, I don't charge more foor tooling and can carve the name of you or your gun into the holster for personalizing it.

Surge-NS · 04-15-2006, 10:06 AM

Have you ever done a tac 8? I saw someone that asked you to do one on another forum I think, but I'm not sure.

Butch · 04-16-2006, 01:30 PM

I haven't done a tac8 as of yet, but I am 100% positive that I can make a holster for it.

Butch · 04-29-2006, 11:56 PM

K&P has been kind enough to let me put my work on his site.
Please send inquiries there, but i will check here as well.

http://www.kpcustoms.net/KPCS/forumdisplay.php?f=76

-Kris "Butch" Gross

Butch · 06-05-2006, 06:09 PM

Nobody interested? I need pics of my SC harness up here...

04-08-2006, 03:21 AM	#1 (permalink)
Butch Active Member Join Date: Apr 2006 Posts: 369	Custom handmade leather holsters Not sure which catagory this should be in, so if I put this in the wrong one, please tell me and I'll take it down ASAP. PICS added from KP's site 2/24/07 On a sidenote, I'm not sure how to size, so if anyone can tell me how to make it all uniform I'd appreciate it. This was a holster I made. I did not make the belt, though this is that a western rig looks like. Sorry for so many pics, just trying to show off my work. If this is wrongly posted please shoot me a Pm, Thanks. These prices reflect me learning a bit more about my own abilities time constraints and such. These do not affect the current projects I'm working on. These prices are for rough estimates and such. Nothing more nothing less. I will be basing all prices off of this. The holster pricing reflects any pistol type marker, though the holster itself will be built around your specific one. All purchases will have 6 coats of clear coat applied before being sent, along with a small amount of leather clear coat/conditioner and directions for leather care and where to get the conditioner. Plain holster, includes the following: (See wolf holster) Dye color of your choice quick release strap (if doable) using snap. Belt loop -$50 Low rider holster (attaches to users own belt): (See Pug holster) Dye color of your choice quick release snap strap if doable Allows adjustment for how high or low the holster sits. wrap around leg strap to minimize "bounce" -$80 Western style holster and belt rig (See western looking rig) (attaches to specific belt included) Requires person for sizing and exact height or holster placement Dye of your choice Quick release snap strap if doable Wrap around leg to minimize "bounce" Loops on belt sewn to fit either 12 grams or 10 rd tubes. 12 loops. -$125 Tactical holster (see Umbrella/ spiky holsters) Optional ALICE clip system Dye of your choice Quick release strap if doable Leg support straps to keep tight to leg and eliminate "bounce" -$140 Shoulder holster (See shoulder harness) 4 points of adjustment for nearly any user 6 angles or possible adjustment for the marker Quick release snap strap if doable Holster "cap" to reduce friction on marker Dye color of your choice -$150 Scabbard- think army of darkness/mad maxx -Priced by quote. Options below can be applied. Armor- By quote only. Options below can be applied. Belts- By quote only. Options below can be applied. Wallets- By quote only. Options below can be applied. Other- By quote only. Options may be applied. These are extra options that can be added for the pricing listed. Lacing (replaces lock stitching)- $1 for every inch laced around the edge. Price of this cannot be determined until marker has been recieved. This is strong, but mainly for cosmetics. Pouches for 12 grams- $5 per 12 gram in pouch. This has a snap flap. Loops for 12 grams or 10 rd tubes $2 per loop. Tooling: 2" by 2" or smaller are $25 2" by 2" to 5" by 5" are $50 5" by 5" to 10" by 10" are $75 Larges by quote. Prices reflect time put into designing the image, transfering to leather, carving, and tooling time. This is a long process and thus the pricing. * This tooling price does not reflect border tooling now basketweaves. * basket weave tooling is $1 for every 1" by 1" Border tooling (barbed wire as of 8/31/06) is $1 for every 2" of edge. Prices do not reflect shipping. However if an order gets beyond $200 I will cover shipping. Whew, sorry about that. If there are any questions or comments please feel free to PM me. Thank you and have a nice day -Butch Updated 3/25-07 PS I would like to thank Dave Seley as well as KP customs for the pictures Last edited by Butch; 07-31-2007 at 10:25 PM. Reason: new pricing*

04-08-2006, 07:43 AM	#2 (permalink)
shartley COWBOY UP Join Date: Mar 2006 Location: Concord, NH Posts: 1,604	Very nice work. I like the leg strap design. __________________ POG #934 / CPPA #2157 / LPPC #1 / BLACKLEAF OUTFITTERS "Post because you have something to contribute, not because you want to contribute to your post count." - Me A5OG / STRIKE FORCE MEMBER

04-08-2006, 01:52 PM	#3 (permalink)
mark I'll split your arrow! Join Date: Mar 2006 Location: Rural northwestern Illinois Posts: 500	Your holsters make me want to buy a pistol, just so I can buy one. __________________ 1. hurricane An temporary alliance formed between the ocean and the sky with the goal of killing people. The ocean's ability to attack the land is limited, so it lends the sky some of its water and energy so it can assault people farther inland then it normally could. Hurricanes are far more powerful then the storms the sky creates on its own. They are just another reason the ocean must be destroyed.

04-09-2006, 03:20 PM	#4 (permalink)
Cleric Custom Gunslinger Join Date: Mar 2006 Location: Sarasota, FL Posts: 615	Very nice looking. Have you made one of your tactical rigs yet for a Squall? I have a 'Phoon setup with a 15 round spring fed magazine and vertical ASA with the 12 gram changer mounted. Have you any ideas for something along those lines. __________________ "Tread softly because you tread on my dreams" - W.B. Yeats "Courage is not the absence of fear, it's the control of fear." My Gallery Feedback at MCB Feedback at SCP

04-15-2006, 10:06 AM	#7 (permalink)
Surge-NS Devious Penguin Mod Join Date: Mar 2006 Location: Brookfield, IL Posts: 893	Have you ever done a tac 8? I saw someone that asked you to do one on another forum I think, but I'm not sure. __________________ Now that's special. One case; One kill. What do you want, a cookie? I am Scourge! Mod: Ask The Experts, Events, PBC Reviews, The Dead Zone

04-09-2006, 04:54 PM	#5 (permalink)
Butch Active Member Join Date: Apr 2006 Posts: 369	Shartley- Thanks that means alot coming from the stock class Guru Mark- Thanks man, always nice to hear shtuff like that Cleric- I can't say as i have done a holster for a squall, in fact have only done my Sydarm a 3774 (I think thats the name...) and a customized PGP. I am positive I can make a holster for any sized marker you'd want, I would need the gun to work with however.

04-13-2006, 12:01 AM	#6 (permalink)
Butch Active Member Join Date: Apr 2006 Posts: 369	I am willing to take trades, preferably the brass kind, or anything that catches my eye. I can tool the following: Skull & crossbones Anarchy symbol yin/yang skull rose celtic knot Pretty much anything you can come up with, I don't charge more foor tooling and can carve the name of you or your gun into the holster for personalizing it.

04-16-2006, 01:30 PM	#8 (permalink)
Butch Active Member Join Date: Apr 2006 Posts: 369	I haven't done a tac8 as of yet, but I am 100% positive that I can make a holster for it.

04-29-2006, 11:56 PM	#9 (permalink)
Butch Active Member Join Date: Apr 2006 Posts: 369	K&P has been kind enough to let me put my work on his site. Please send inquiries there, but i will check here as well. http://www.kpcustoms.net/KPCS/forumdisplay.php?f=76 -Kris "Butch" Gross

06-05-2006, 06:09 PM	#10 (permalink)
Butch Active Member Join Date: Apr 2006 Posts: 369	Nobody interested? I need pics of my SC harness up here...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search