mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   Dealers Forum (http://www.mcarterbrown.com/forums/dealers-forum/)
-   -   Precision Powder - Custom Marker Refinishing (http://www.mcarterbrown.com/forums/dealers-forum/241132-precision-powder-custom-marker-refinishing.html)

Precision Powder 09-02-2013 06:23 PM

Precision Powder - Custom Marker Refinishing
 
Let me start with a quick introduction, my name is Roger and I own Precision Powder. I offer custom powder coating, custom ceramic coating, media blasting, and chemical stripping. While I mainly deal in the automotive/motorcycle and construction industries, paintball guns, and custom chameleons/colors are my specialty.


Where powder coating is better than anodizing:
1) I can produce colors that anodizing is not capable of producing, ever
2) I can produce finishes that anodizing is not capable of producing, ever
3) Powder coating offers serious protection again stretches and dings. if you scratch anodizing you also are stretching the metal
4) Powder coating can produce truly metallic colors with color shifting flakes and pearls
5) Powder coating can be stripped an indefinite amount of times without effecting the metal
6) Powder coating can be applied to any metal not just aluminum
7) Powder coating can be applied to cast metals where anodizing can only be applied to billet aluminum. While this does not directly apply to paintball its a handy piece of information to know.

Two important things to keep in mind:
1) Powder coating is an external coating only, it will not be applied to interior parts of the marker, those will be taped and plugged off. If your marker is already anodized I will clean it up and go directly over it as there is no reason to remove it unless it is a very poor job.
2) Despite the ridiculous myth your marker will NOT be noticeably heavier, we are talking fractions of an ounce maybe.


While I'm here I'd like to address the cost factor, pricing of powder coating is difficult as it is based on a number of different factors: number of coats, size of the object, number of pieces, existing condition, finish requested, and custom finishes/colors. Prices for a full marker can range anywhere from $100 for a simple one color job to $350-400 for something completely custom with multiple layers, custom flakes, custom pearls, or other effects.

Things to note about the finishes, because powder coating is a dry application things like an acid wash is not possible (yet, working on some things to make this happen). Splashes are possible just not something I typically do. Fades are possible but are difficult on this scale so I do not typically offer them on paintball markers. However finishes such as: metallics, veins, rivers, textures, wrinkles, chameleon, candy, matte, glossy, cast, and pearls are available. These effects can be compounded when I use more than one on the same part.


While I'm on the topic of finishes, custom finishes will always be a one off job. I will NEVER repeat a finish for someone if i have already done it for someone else. Its important to me that each custom job stays unique. I will do something close, or something of the same concept but please do not ask me to copy something I have already done because I will not do it.

Now on to some pictures, here are a few of the custom finishes I have done.

Custom metallic wine red candy, with a metallic charcoal

https://fbcdn-sphotos-g-a.akamaihd.n...40959922_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...89727591_n.jpg






Orange with gold pearl, with a chameleon purple -> blue flake

https://sphotos-a.xx.fbcdn.net/hphot...81745021_n.jpg

https://sphotos-b.xx.fbcdn.net/hphot...96221482_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.n...18073799_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.n...09403924_n.jpg




Completely custom chameleon finish with multiple sized flakes.
https://sphotos-a.xx.fbcdn.net/hphot...06235105_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...12006173_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.n...46601950_n.jpg

https://sphotos-a.xx.fbcdn.net/hphot...77433431_n.jpg

https://fbcdn-sphotos-e-a.akamaihd.n...27618403_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.n...16854210_n.jpg


Custom flat transparent purple
https://fbcdn-sphotos-d-a.akamaihd.n...57498937_n.jpg



Custom purple flake intended to be black out of direct sunlight but sparkle purple in the sun.
https://sphotos-a-lga.xx.fbcdn.net/h...28819387_n.jpg

https://fbcdn-sphotos-a-a.akamaihd.n...77026376_n.jpg


https://fbcdn-sphotos-b-a.akamaihd.n...44983259_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.n...13902795_n.jpg

https://fbcdn-sphotos-b-a.akamaihd.n...20961440_n.jpg



Custom pearl white with a custom blue pearl
https://fbcdn-sphotos-a-a.akamaihd.n...20392663_n.jpg

https://fbcdn-sphotos-d-a.akamaihd.n...64268027_n.jpg



Custom flat brown miniature texture
https://sphotos-b-iad.xx.fbcdn.net/h...54865641_n.jpg

https://sphotos-b-iad.xx.fbcdn.net/h...33638030_n.jpg


Custom metallic navy blue with a heavy custom dark blue flake, and a custom blue pearl white
https://sphotos-b-iad.xx.fbcdn.net/h...61178276_n.jpg

https://sphotos-b-iad.xx.fbcdn.net/h...94163789_n.jpg



Gloss black with custom holographic flake
https://sphotos-b-iad.xx.fbcdn.net/h...39617867_n.jpg

https://sphotos-b-iad.xx.fbcdn.net/h...67858515_n.jpg





Its also worth mentioning for those of you that want the truest tactical finish for anyone running scenarios I do offer a full line of ceramic coating. These coatings are applied at .001" and are good up to 1800 degrees.

https://sphotos-a-lga.xx.fbcdn.net/h...65888782_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.n...21453263_n.jpg

https://sphotos-b-lga.xx.fbcdn.net/h...88812290_n.jpg

https://sphotos-b-lga.xx.fbcdn.net/h...35498315_n.jpg













If anyone has any questions feel free to post them here.

SlvrDragon50 09-02-2013 07:01 PM

Woooaaaah. Incredible quality. Would you be willing to powder coat a part off a turn table? Should be fairly easy.

Precision Powder 09-02-2013 07:13 PM

Quote:

Originally Posted by SlvrDragon50 (Post 2793935)
Woooaaaah. Incredible quality. Would you be willing to powder coat a part off a turn table? Should be fairly easy.

Thank you, I refuse to let anything walk out the door that is not perfect.

I can most certainly do anything you would like. The only to requirements it needs to meet: not be magnesium and fit in my 6x6x4' oven.

turbowagonman 09-02-2013 07:30 PM

Looks very cool!

I may send you a pm down the road once I get a project gun close enough. Very cool though.

artguy63 09-02-2013 07:34 PM

I've done some powdercoating in my day and have a few questions.

1. I'm assuming the finish only goes on the exterior portions of the gun?

2. If it does go everywhere, how much will it effect the tolerances?

3. Do you have a color palette that you order from, or is it basically anything we want?

Thanks

Precision Powder 09-02-2013 07:43 PM

Quote:

Originally Posted by artguy63 (Post 2793958)
I've done some powdercoating in my day and have a few questions.

1. I'm assuming the finish only goes on the exterior portions of the gun?

2. If it does go everywhere, how much will it effect the tolerances?

3. Do you have a color palette that you order from, or is it basically anything we want?

Thanks


1. Its an exterior coating ONLY, how ever once the gun it assembled you will not see any of the original finish.

2. See number one.

3. Pretty much anything you want.

wd3d 09-02-2013 08:03 PM

Sending you a PM

pghp8ntballer 09-02-2013 09:56 PM

How does the powder coat affect threads? When threading parts in, will they be snug, rough, or cause the powder coat to chip?

Precision Powder 09-02-2013 09:57 PM

Quote:

Originally Posted by pghp8ntballer (Post 2794020)
How does the powder coat affect threads? When threading parts in, will they be snug, rough, or cause the powder coat to chip?

Please see above pictures and comments.

Those areas do not get coated. They are masked off prior to coating.

karni-collector 09-02-2013 10:05 PM

dear sweet lord, those pics completely changed my opinions on powder coating!!

Subscribed!!!.... and do you have a Facebook page?


All times are GMT -4. The time now is 03:53 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC