-   Dealers Forum (
-   -   FloryPB Freak Boring Service (

Paintballer50505 10-02-2013 11:44 PM

FloryPB Freak Boring Service
My lathe is currently down I will let you know when I get the spindle fixed. I need to find a set of bearings for this old lathe which are not a standard size unfortunately

Sorry for the inconvenience will resume operation after I get the lathe back up and running correctly


I am starting up my freak boring service again, I have done this in small amounts in the past but now that I have some time at night after work I would like to get this going more often.

I will only accept aluminum barrels at this time.
Show me a picture of the barrel before sending it to make sure I can put it in my fixture.

Proof of work, I use a reamer instead of a boring bar followed by a flex hone just to make sure its nice and smooth and there are no little burs still in the barrel.

Now for the good news

Price $20 per barrel + Return Shipping meaning whatever it cost you to get it to me add it to the $20 and I will send it back the same way I receive it.

I guarantee my work

I will guarantee same week turnaround or its free, unless unforeseen complications, IE my house burns down, my lathe breaks, etc.

Also all freak inserts will fit your barrel after I bore it and your barrel will not get destroyed or I will buy the barrel for whatever the market value is.

I also reserve the right to send any barrel back that I feel cannot be freak bored correctly with my setup, or if the barrel itself cannot be freak bored for reasons of being to thin afterwards or out of round.

chopper duke 10-03-2013 12:36 AM

Can you do Javelins?

Paintballer50505 10-03-2013 07:37 AM


Originally Posted by chopper duke (Post 2815013)
Can you do Javelins?

I'm pretty confident that my setup can take the javelins taper

markcheb 10-03-2013 08:13 AM


Paintballer50505 10-03-2013 08:29 AM


fishballer06 10-03-2013 03:31 PM

Any discount for sending in multiple barrels?

Paintballer50505 10-03-2013 03:54 PM


Originally Posted by fishballer06 (Post 2815382)
Any discount for sending in multiple barrels?

Shipping won't cost more, my price is setup to give people a discount by shipping multiple barrels. If its a large sum like 10 or more we can work on a further discounted price

AbeShip 10-03-2013 10:20 PM

Pictures of lathe/set up? :). Just to oogle over!

PBLife 10-03-2013 11:20 PM

How about an Axe and Bob Long .693 gen 3 Timmy barrel?

Paintballer50505 10-03-2013 11:28 PM


Originally Posted by laxpro69 (Post 2815657)
Pictures of lathe/set up? :). Just to oogle over!

She is a good old gal

I use a reamer with a stop. The black piece is delrin to prevent scratching when the edge of the barrel touches. I have a bigger stop for phantom barrels, that one on there is for the normal bore. I have a few flex hones I use afterwards to clean up any burrs that could possibly be there.

There is a bit more going on inside my chuck but I will leave you guys to guess what is going on in there centers it, dampens it and prevents tapered barrels from wanting to move:p

All times are GMT -4. The time now is 07:20 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC