|Dealers Forum Paintball Dealer? Having a Special? Let us know here.|
| ||Thread Tools||Search this Thread|
|10-17-2014, 02:26 AM||#15 (permalink)|
Join Date: Mar 2011
Location: Calgary, AB
I typically carry one extra tube and give them 1 ball from it.
I'm an *** like that.
|07-24-2015, 12:26 PM||#19 (permalink)|
Hello, very interested in the SLPS kit. I love tinkering with my halfblocked sniper and am currently trying to run as low pressure as possible while maintaining consistency of 285 +/- 5fps (mainly paint inconsistency). I was wondering if you've noticed any change in velocity consistency when using the spring kit? Also I am curious what is the diameter of the Valve spring? I guess inner diameter.
I am current running the ccm lower tube kit. According to what I've read, at least the hammer spring is softer, but the Valve spring is incompatible. I was looking into the check-it or palmers valve stems that should work with it.
Let me know
|07-24-2015, 06:18 PM||#20 (permalink)|
I like Guns and Cigars.
Join Date: Jul 2008
I haven't heard about consistency issues, so the answer is no. Paint and your reg will have a far greater effect on that.
The ID is .305". I've heard people say they don't work with CCM valve stems, but all you'd have to do is manipulate the one end of the spring to fit onto the valve stem.
|Thread Tools||Search this Thread|