New Noxx55 products - AGD sight rail and CF springfeed adapter

noxx55 · 01-31-2008, 06:26 PM

Made these for a current mag rifle and Chem-X had asked about the sight rail. Here they are:

CF Springfeed adapter (would work best on a ULE body)-

These will be priced as follows
Less than 12" $65+shipping
Longer than 12" $85+shipping

AGD sight rail -

Originally made this as a longbow adapter for the ULE body. Works great for that but can also be used as a sight rail. The one shown is ~2.5" in length and a weaver rail is cut into the top. The weaver rail can be made any length desired. Standard is 2.5", Add $5 for every extra inch of weaver rail desired.

$30+shipping

01-31-2008, 06:26 PM	#1 (permalink)
noxx55 Working on it!!! Join Date: Apr 2006 Location: Meridian, Idaho	New Noxx55 products - AGD sight rail and CF springfeed adapter Made these for a current mag rifle and Chem-X had asked about the sight rail. Here they are: CF Springfeed adapter (would work best on a ULE body)- These will be priced as follows Less than 12" $65+shipping Longer than 12" $85+shipping AGD sight rail - Originally made this as a longbow adapter for the ULE body. Works great for that but can also be used as a sight rail. The one shown is ~2.5" in length and a weaver rail is cut into the top. The weaver rail can be made any length desired. Standard is 2.5", Add $5 for every extra inch of weaver rail desired. $30+shipping __________________ Wading through a mess, But I am moving forward...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search