Buy, Sell, Trade

[Oregon HG]

Originally Posted by Mespllingesnogud

Have you ever done something like the limbs of a bow? I know you said that flexible things such as rubber could have problems, and I'm curious if the flexing while being drawn back would be a problem.

Ya it is fine on bows! I actually worked for Bowtech for 5 years and was a supervisor in their dipping facility prior to starting this company. It is the same process used by almost every bow and firearms manufacture that camo's their equipment!

[Oregon HG]

Originally Posted by Drachen

Question on how you'd do something like a Tippmann 98? If I sent you just the two halfs of the body, what would be done to keep the graphics on the outside of the body only? Or would that not be much of a problem?

What about a bowling ball? Do you know if there could be any durability problems with a bowling ball?

When you say the outside, I assume you mean out of the threads and other holes? I plug all the holes, look in the review section on the review of the gun I just finished! It shows the steps I take in plugging and thru the finished product.

As for a Bowling ball, Novel idea, but I don't think it would hold up to being used! The clear they use on bowling balls is a different type of urethane coating....

[Delasgirl]

Ahhhh!! Totally cool. I want. Need to finish setting up marker. Grrr.

[blackrain]

Mike,
I think what Drachen was asking is keeping the film out of the inside of each half. 98s,A5 and other tippmann guns are two part bodies. Alot of folks do an internal polish on the inside. Here are some example pictures that I took off the A5OG:

A5 body together:


A5 body split open with inside polish:


So basically I think he's asking how will this avoid being touched.
Later,
Blackrain

[Oregon HG]

Originally Posted by blackrain

Mike,
I think what Drachen was asking is keeping the film out of the inside of each half. 98s,A5 and other tippmann guns are two part bodies. Alot of folks do an internal polish on the inside. Here are some example pictures that I took off the A5OG:

A5 body together:
http://img.photobucket.com/albums/v3...f/877a03bd.jpg

A5 body split open with inside polish:
http://img.photobucket.com/albums/v3...uff/Sand10.jpg

So basically I think he's asking how will this avoid being touched.
Later,
Blackrain

gotcha! Looks like some good ole' 3M 2" masking tape should do the job nicely!

[blackrain]

Later,
Blackrain

[Lt. head-shot]

k so im getting a marker (sterling to be exact) in a trade and i want it to be dipped. it has one large body (similar to blackrain's gun), a trigger frame, an asa and a barrel (2 piece i think). i would also like my 3.5 oz dipped.

since this is 6 pieces, does that mean its gonna be double what 3 pieces are? so $130?

and what color is the one you posted earlier for splatttt, the one that looks like snake skin.

ill pm you tmrw with my horrible photoshop job.

[Mnofstl007]

i have a 2k4 prostock i decided to pimp out and am debating between ano, gold plating, or maybe this.

Im lookin for a blue/black/white pattern maybe the skulls. But is there any way for you to message me with ALL of your patterns that are blue or have blue in them? i looked at ur gallery but i have seen posts on here that arent in your gallery so i was just wondering.

[Aronmsmith1987]

nice to see this offered I have done some of this myself see my Real Tree Camo Tank the best to you and your buisness AronMsmith1987

[Drachen]

Yes, that's exactly what I was talking about Blackrain. Thanks!

I'll be getting a couple of quotes from you in the near future