ECAP Pump Kits Turn that beater cocker to a pump

BigOldSkool · 10-22-2008, 10:35 PM

Ive been messing around with a style to produce for a kit that isnt something you would normally see on a pump that was both eye pleasing and functional.

I wanted a one piece pump that would incorperate my "White Fish" Plate concept for pumping with two fingers and anti slip so you could use the pump and not slip off even in the worst of situations..... Rain, snow, way brittle ultra evil dripping out of the porting on your barrel and fouling up your pump

(NPPL Humor). I also didnt want a big horkin piece of delrin on the nose of the gun wieghing things down...

With out much ado...

They are available for the following
- Pre 2k spec - $25.00
- 2k Spec - $35.00 (Should have one made up sooner or later.)
- Trilogy Kits - $25.00 (DIY ram mount cutting or send it in for and Ill mill it off for $5) Trilogy kits come from ECAP with a return spring. Can also be had in deluxe for another $5 bucks as well.
- Pump only for WGP spec pump rods - $15.00
- EconMini Ecap Kits - $40, you will need to send your gun, and front block in to me though. (2k+ minis only)

The 2k spec basic kits rods will be aluminum and polished and the pre 2k stainless steel.

Trilogy Kit with some extra milling... Can be had for $5 extra on any pump kit available.. This one is going out on a CIWF gun

Trilogy Deluxe Kit... Pump design not available as its a one off for a charity game I was part off and will never be copied again. This will add another pump stabalizing arm to your pre-existing dead three way port..... No twist and gives your Low budget pump that high budget anti-twist awsomeness

ECONO-MINI Kits!!

Why spend the money for a fancy kit when all the part you need to have a mini cocker are right in front of you.. I came up with this idea for the kid a while back for a local customer, I liked it so much Im going to offer it... Gun show is Weekendballers here.

You will need to send your gun and what ever front block you want to have milled up for pump use in to me and Ill do all the work to de-cockerfy it!

Not just cockers either! Sheridans!!!!!!

- Kp-2 - $60 do to the time involved making the cuts
- PGP - $20
- 4 inch sheridan style pump regular style - $30 please specify if you need a cut out for a trigger frame..

ECAP Coming soons....

- Mini Kits http://i65.photobucket.com/albums/h2...Picture229.jpg
- Deluxe kits
- One of Factory sponsored players designed snipers... CIWF One offs! They will be built and super tuned and sold only after they proved they are super guns.
- More more more more.

99GenX · 10-22-2008, 10:37 PM

Great looking kit Big!

foughtwolf · 10-22-2008, 10:40 PM

Is the top one based off of a Sheridan pump handle with some sort of insert?

EDDAKA · 10-22-2008, 10:45 PM

How is the clearance on them? Will they fit any barrel?

BigOldSkool · 10-22-2008, 10:52 PM

Quote:

Originally Posted by foughtwolf

Is the top one based off of a Sheridan pump handle with some sort of insert?

No the front 1.5 inches of the kit is hollow... These are all made from stock not pre-existing stuff.

As for clearance...

They are speced of the widest barrel I have on hand which is the old sniper one barrel which is just a hair over 1 inch OD... If your worried about freak kits Ill look into it..

But as it is right now they will clean every barrel Ive tossed on it.. even an old one piece smartparts.

EDDAKA · 10-22-2008, 11:08 PM

Quote:

Originally Posted by BigOldSkool

If your worried about freak kits Ill look into it.

Yeah, thats actually what i was thinking about.

Rickfactor2 · 10-22-2008, 11:10 PM

It would be even cooler if you could rig up a laser inside the pump handle. Even cooler still if it would only activate when the pump handle was all the way forward.

Nice job btw.

Ryantuomi · 10-22-2008, 11:13 PM

PM'ing you.

Cunha · 10-22-2008, 11:20 PM

I like the pump handle. Looks a bit funny when you cant see the detail, but the knurling and ribs look fantastic when you realize they are there.

BigOldSkool · 10-23-2008, 12:23 AM

Quote:

Originally Posted by Rickfactor2

It would be even cooler if you could rig up a laser inside the pump handle. Even cooler still if it would only activate when the pump handle was all the way forward.

Nice job btw.

If you can find a laser less then 1 inch ID ,I can more then likely figure it out.

10-22-2008, 10:35 PM	#1 (permalink)
BigOldSkool MCB Member Join Date: Jul 2006 Location: Deer Park, NY	ECAP Pump Kits Turn that beater cocker to a pump Ive been messing around with a style to produce for a kit that isnt something you would normally see on a pump that was both eye pleasing and functional. I wanted a one piece pump that would incorperate my "White Fish" Plate concept for pumping with two fingers and anti slip so you could use the pump and not slip off even in the worst of situations..... Rain, snow, way brittle ultra evil dripping out of the porting on your barrel and fouling up your pump (NPPL Humor). I also didnt want a big horkin piece of delrin on the nose of the gun wieghing things down... With out much ado... They are available for the following - Pre 2k spec - $25.00 - 2k Spec - $35.00 (Should have one made up sooner or later.) - Trilogy Kits - $25.00 (DIY ram mount cutting or send it in for and Ill mill it off for $5) Trilogy kits come from ECAP with a return spring. Can also be had in deluxe for another $5 bucks as well. - Pump only for WGP spec pump rods - $15.00 - EconMini Ecap Kits - $40, you will need to send your gun, and front block in to me though. (2k+ minis only) The 2k spec basic kits rods will be aluminum and polished and the pre 2k stainless steel. Trilogy Kit with some extra milling... Can be had for $5 extra on any pump kit available.. This one is going out on a CIWF gun Trilogy Deluxe Kit... Pump design not available as its a one off for a charity game I was part off and will never be copied again. This will add another pump stabalizing arm to your pre-existing dead three way port..... No twist and gives your Low budget pump that high budget anti-twist awsomeness ECONO-MINI Kits!! Why spend the money for a fancy kit when all the part you need to have a mini cocker are right in front of you.. I came up with this idea for the kid a while back for a local customer, I liked it so much Im going to offer it... Gun show is Weekendballers here. You will need to send your gun and what ever front block you want to have milled up for pump use in to me and Ill do all the work to de-cockerfy it! Not just cockers either! Sheridans!!!!!! - Kp-2 - $60 do to the time involved making the cuts - PGP - $20 - 4 inch sheridan style pump regular style - $30 please specify if you need a cut out for a trigger frame.. ECAP Coming soons.... - Mini Kits http://i65.photobucket.com/albums/h2...Picture229.jpg - Deluxe kits - One of Factory sponsored players designed snipers... CIWF One offs! They will be built and super tuned and sold only after they proved they are super guns. - More more more more. __________________ RIP - Ed "BigDaddy" Roth and "Indian" Larry "Reading APG does not make you an airtech" Wild Geese - Coney Isand White Fish - Brotrocity - ECA BOS's Feedback! What Serial Number Is Your Cocker? WTB Last edited by BigOldSkool; 04-02-2009 at 02:06 AM.

10-22-2008, 10:37 PM	#2 (permalink)
99GenX Pseudo-Agg Join Date: Apr 2006 Location: > 9000	Great looking kit Big! __________________ Sincerely, Me

10-22-2008, 10:40 PM	#3 (permalink)
foughtwolf (V) (o,,,o) (V) WOOP WOOP Join Date: Apr 2007 Location: Springfield, MO	Is the top one based off of a Sheridan pump handle with some sort of insert? __________________ The dog is loose again. It is not sleeping. It is not lazy. It's coming for you It's very hungry. And it's Very angry. This is the tenth line of my signature

10-22-2008, 11:10 PM	#7 (permalink)
Rickfactor2 Blue resistance movement. Join Date: Nov 2006	It would be even cooler if you could rig up a laser inside the pump handle. Even cooler still if it would only activate when the pump handle was all the way forward. Nice job btw. __________________ -------------------------------------------------------------------------------------------------------------------- How to post on any forum. It puts the hands in the air or its gets the paint again. â€œSix men came to kill me one time. The best of 'em carried this. It's a Callahan full-bore autolock, customized trigger, double cartridge, thourough-gage. This is my very favorite gun.â€ - Jayne

10-22-2008, 11:13 PM	#8 (permalink)
Ryantuomi STICKERS! Join Date: Apr 2008 Location: Thunder Bay, Ontario	PM'ing you. __________________ STICKERS! FEEDBACK: EBAY MCB Pballcanada

10-22-2008, 10:45 PM	#4 (permalink)
EDDAKA Yngling Half troll Join Date: Jul 2008 Location: East Texas	How is the clearance on them? Will they fit any barrel?

10-22-2008, 11:20 PM	#9 (permalink)
Cunha Post Whore Join Date: Apr 2006 Location: Monterey, CA	I like the pump handle. Looks a bit funny when you cant see the detail, but the knurling and ribs look fantastic when you realize they are there. __________________ "...as if adding zeroes could produce a sum"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search