Buy, Sell, Trade

[Altec]

All items are custom built in house at the Alternator shop.
All Items are one off, or limited short run. Some more limited then others. Make sure to check the item descriptions.
All items are shipped USPS Priority Mail with Delivery Confirmation. If you prefer another shipping service or shipping class please message me.
Money Order, or Paypal. If that is not a option, feel free to message me!

To place a order post in this thread, message, or email me at Altecster>At<Gmail.com . Please put "Alternator" in the title if emailing. Provide what item you want, your address, and your payment method.

Product Name: Alternator Barrel Loudener
Price $25 shipped
Description: Add that extra "AH MY EARS" to your marker. They are setup to be used on 7/8" OD barrels. They are made undersized to give a snug fit. If you find the fit is to tight to get on, get some 220grit sand paper, and sand the inside the loudener. Remember, its easier to take material off then it is to put it back on! They are made of Delrin making them super light. Unlike some other loudeners that are like strapping a weight to the barrel of your marker. Get all the effect without changing the feel of your marker! I also have three blanks ready for custom sizing. message me for more info!
Picture('s)

7/8" loudeners left: 5
Blanks left: 3

Barrel fitting service: If you have a barrel that is not a straight OD, I can cut the OD of the barrel down around the tip to fit the loudener. Please message for more info!


Product Name: Mini Barrel Loudener/Barrel Tip
Price $20 shipped
Description: A lower profile version of the bigger Alternator Loudener. Gives a slight change to the sound signature without going full bore. Nothing significant, just a slight tone change. They have some slight scuffing from lying in my parts box. Made of Delrin. 1" 1/8" OD 2" 15/16" long.
Picture('s)

Oversized 7/8" loudeners left: 1
7/8" loudeners left: 1

Feedback:
Altec Feedback

[IkeUSMC]

I'm interested if you still have these.

PM'd.

[Altec]

Originally Posted by IkeUSMC

I'm interested if you still have these.

PM'd.

Replied! Thank you!

[ZooPaint]

would you be able to make a video comparison (with/without the loudener?)

[skipjack289]

They are just as loud as an AA Intimidator.
I have both for my Automag and both produce a loud crack that annoy people around me, and it signals my teammates as to where I am.

[Altec]

Originally Posted by ZooPaint

would you be able to make a video comparison (with/without the loudener?)

I don't really think I can. All I have is a crappy camera that is going to want to auto-adjust the volumes to make it sound "right." I wish I had a Db meter. Skipjack is right though. You do see...errr...hear quite a difference. They can make your marker a good bit louder.

Originally Posted by skipjack289

They are just as loud as an AA Intimidator.
I have both for my Automag and both produce a loud crack that annoy people around me, and it signals my teammates as to where I am.

Hey Skipjack, your Sniper is pretty much done. I've been spending the last month trying to find a freaking screw! I don't think there is one in MD... So I'm gonna order one from McMaster.

[IkeUSMC]

As a new owner of one of these loudeners, I can tell you they are as loud as anything else I've heard. Buddy of mine has an AA Intimidator, this is as loud, if not louder. Also a bit lighter on the front end of your gun.

I put it on a short, un-ported Trracer barrel and it is comparable to firing a .22 inside. Very nice loud, crack to it.

Plus, the press fit is nicer than having to use set-screws on your barrel.

Just my two cents.

-Ike

[Altec]

Mine is 2.45oz, the AA Timmy is 4.50oz. I use one of my loudeners on my old blowback with a 14" barrel, and with the extra leverage, you really notice a difference. I barely notice mine compared to others. That one is also my "blank" prototype, so it doesn't have the extra material taken off.

[skipjack289]

Originally Posted by Altec

Hey Skipjack, your Sniper is pretty much done. I've been spending the last month trying to find a freaking screw! I don't think there is one in MD... So I'm gonna order one from McMaster.

Take your time. And thanks for the update.

[BigT4203]

Altec, pm'ed you.