mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   DIY Tech (http://www.mcarterbrown.com/forums/diy-tech/)
-   -   007 piercing pin substitute (http://www.mcarterbrown.com/forums/diy-tech/134564-007-piercing-pin-substitute.html)

Smiley 09-17-2010 04:01 AM

007 piercing pin substitute
 
Seems like someone is always looking for a 007 pierce pin.
I am sure the are getting harder to find.I compared an original to a CCI pin noting the cup and the shoulder were very close.Without modifing the 007 valve there isn't enough room for an adapter so I modified the CCI pin(always mod the cheaper part first)
The CCI pin is about 1/16" shorter from the shoulder to the cup but there are just enough extra threads on the plunger screw to still have full thread engagement with the frame.

http://www.paintballcity.org/images/.../007pin002.jpg
http://www.paintballcity.org/images/.../007pin003.jpg
http://www.paintballcity.org/images/.../007pin009.jpg
http://www.paintballcity.org/images/.../007pin007.jpg
http://www.paintballcity.org/images/.../007pin005.jpg
http://www.paintballcity.org/images/.../007pin019.jpg
http://www.paintballcity.org/images/.../007pin018.jpg

If it should ever break off a 5/64" allen wrench fits inside the valve, you used blue locktite right ?
http://www.paintballcity.org/images/.../007pin024.jpg
http://www.paintballcity.org/images/.../007pin023.jpg
http://www.paintballcity.org/images/.../007pin022.jpg

http://www.paintballcity.org/images/.../007pin014.jpg
http://www.paintballcity.org/images/.../007pin016.jpg
http://www.paintballcity.org/images/.../007pin017.jpg
http://www.paintballcity.org/images/.../007pin012.jpg

melkson 09-17-2010 05:49 AM

VERY nice work!

snaparen 10-01-2010 02:32 PM

This is so good maybe it should be stickied

Greenmtnphantom 10-01-2010 02:42 PM

Quote:

Originally Posted by snaparen (Post 1490170)
This is so good maybe it should be stickied

I second that.

Great work.

russc 10-01-2010 04:42 PM

That would be perfect for the ASP vintage section...

jhyan 10-02-2010 12:15 AM

That. Is. Sweet!

Oh, and is your 007 bored for freak inserts? Nice. Been thinking of looking into that for awhile.

Smiley 10-02-2010 12:48 AM

Quote:

Originally Posted by jhyan (Post 1490748)
That. Is. Sweet!

Oh, and is your 007 bored for freak inserts? Nice. Been thinking of looking into that for awhile.

That's not a freak insert it's just a brass lined barrel.

Greenmtnphantom 01-22-2011 12:01 PM

For what it's worth, if you don't have the means to do this mod yourself. Nelson is still selling the 007 pins.

paintman161 01-29-2013 04:25 PM

I did this to my stock 007 pin and it worked like a charm!

pghp8ntballer 02-04-2013 06:06 PM

How on earth are you drilling the set screw? What sized drill bit? All my small bits are toast. I have tried a regular steel and a stainless screw but can hardly get 1/16" deep. I got the pierce pin drilled and tapped though.


All times are GMT -4. The time now is 10:40 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC