|DIY Tech Specific Tech How-To's for Customizing your Gun|
| ||Thread Tools||Search this Thread|
|12-30-2010, 04:38 PM||#1 (permalink)|
Join Date: Dec 2010
Location: Petawawa Ontario
Classic mag back bottle adapter stuck
Good'ay, I've recently gotten a classic mag which had a bottomline and back bottle ASA. The allen screw heads seem to be mostly stripped and I can't remove the back bottle.
I know about heating and that stripped machine screw removers are avaliable. I don't want to damage the ASA by heating it but it could be loctited?
I was also thinking of dremeling a slot into the screws and attempting to remove them with a slotted screwdriver. Has anyone dealt with stripped allen screws like this before?
Last edited by LGswift; 12-30-2010 at 04:44 PM.
|12-30-2010, 04:53 PM||#2 (permalink)|
Join Date: Nov 2008
Location: british columbia
I use a drill with a 5/16 drill bit to get those pesky stripped screws unattached.
It's not cold till the sweat on your hands freezes to
your hockey stick
forever looking for my beloved mag sm00431
|Thread Tools||Search this Thread|