|DIY Tech Specific Tech How-To's for Customizing your Gun|
| ||Thread Tools||Search this Thread|
|03-01-2013, 10:09 AM||#1 (permalink)|
Join Date: Sep 2012
Location: Great Britain
diy trip wire mine
Trying to make some props for our next game
Then i stumbled accross paintball land mines.
I will be making some of these.
But i would like to make either paint or powder trip wire mine.
Hopefully sombody can help me.
But normally my posts just go south then just get lost.
|03-01-2013, 10:46 AM||#2 (permalink)|
There's a few on instructables.com. I've always been a bit iffy about leaving pressurized chambers around the field, but here's one that uses surgical tubing -> surgical tubing paint mine
|03-01-2013, 10:53 AM||#3 (permalink)|
Join Date: Dec 2008
Location: Houston, TX
Check your game rules if you haven't already. Our producers have varying rules on trip wires and unattended/remote devices. I think one allows breakable wires.
I've often wanted to make an electronic skunk from a garage door safety beam. Set it to spray a mixture of paint and cheap cologne. Then there's no doubt who was hit. In our games though, I would just as likely catch someone on my own team.
Reffing near a red base one night, I started a blue player on an "hold" objective. I watched as another blue player strolled up and barrel tagged the first blue player and continued the hold. It was a bit cocked up, but I gave them credit for it.
What is fairly handy are ground planted motion sensor lights around the base at night. Harmless to your team, but lots of fun when the opposition steps into them.
some things are stickier than others
|03-01-2013, 10:54 AM||#4 (permalink)|
Join Date: Aug 2012
Location: Calgary, Alberta
DVLCHLD on a5og.net makes great tripmines and sells them for cheap on eBay. If you contact him he may be able to arrange shipping across the pond.
My new "pod-mine"
|Thread Tools||Search this Thread|