mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 04-25-2012, 10:43 PM   #1 (permalink)
MCB Member
 
Cale's Avatar
 
Join Date: Apr 2008
Location: Champaign, IL

Fan of EMR
CCM Fan
Brass N Wood Fan
RTP Fan
Issues with DSP trigger. Suggestions?

I picked up a DSP frame and duckslide right before SPE. I had some velocity issues on the field, and was breaking my gun down. I heard a 'pop!' and realized I had taken it apart with the hammer cocked.

This caused my trigger return spring and trigger stop to pop out. I reassembled the frame from instructions in the video posted online, but I'm having trouble keeping the spring and trigger stop in place. After several squeezes, the trigger pull becomes rough, and the spring and stop eventually dislodge.

Does anyone have any advice? The spring doesn't show any signs of damage/bending from my gaff. Neither do any of the other components.

I'm considering taking a small ball style dremmel bit and creating a relief in the frame for the return spring to rest in. (I'd do this with a proper mill, not with a dremmel tool.)

My other thought was to drill and tap the back of the trigger for an adjustable trigger stop. The stop would have to be very small, given the width of the trigger itself. I'm not too hot on this one, especially since Dukie doesn't even want to do this on the new batch.

Anyone else having an issue like this? Any other advice?
__________________

My feedback
Cale is offline   Reply With Quote
Old 04-25-2012, 11:17 PM   #2 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
Quote:
Originally Posted by Cale View Post
I picked up a DSP frame and duckslide right before SPE. I had some velocity issues on the field, and was breaking my gun down. I heard a 'pop!' and realized I had taken it apart with the hammer cocked.

This caused my trigger return spring and trigger stop to pop out. I reassembled the frame from instructions in the video posted online, but I'm having trouble keeping the spring and trigger stop in place. After several squeezes, the trigger pull becomes rough, and the spring and stop eventually dislodge.

Does anyone have any advice? The spring doesn't show any signs of damage/bending from my gaff. Neither do any of the other components.

I'm considering taking a small ball style dremmel bit and creating a relief in the frame for the return spring to rest in. (I'd do this with a proper mill, not with a dremmel tool.)

My other thought was to drill and tap the back of the trigger for an adjustable trigger stop. The stop would have to be very small, given the width of the trigger itself. I'm not too hot on this one, especially since Dukie doesn't even want to do this on the new batch.

Anyone else having an issue like this? Any other advice?
Put the spring and pin in place. Pull the trigger slightly. You will notice the back rotated up a tiny amount. Hold it there and push the pin and spring back down to the bottom. Cut end of the spring towards the back iirc.

New triggers with an integral pin are made. I just need to debur them before I send them out. Plus I need to get the front sites compete for the slides so i can ship everything at once.
__________________
DSGs are in stock
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Dukie

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 03:22 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC