mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 04-17-2014, 09:36 PM   #11 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
I suppose its the middle of the night over there now so will hear back tommorrow morning over here.

If you have removed both screws and definately installed the short one in the bolt, check to see where the velocity screw is set. Iv you have an eva remove the grip and tell me what the gap is between the black piece and the silver piece. If you do not, remove the grip and see how far the setscrew is screwed into the bottom hole in the back of the body. It should be nearly flush with the pocket where the grip fits.

After that, what are you using for a barrel?
__________________
DSGs are in stock
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Old 04-18-2014, 10:21 AM   #12 (permalink)
Bad Brothers
 
Join Date: Mar 2012
Location: France

Quote:
Originally Posted by Mar View Post
winner of the internet for 2014!

merci mon grand! J'ai bien rit!
Sorry friend, my English is not very good and I use google translation to communicate. But apparently you like making fun and if it could make you laugh, well you better.



Hello Dukie, you're not talking about these 2 screws ? I never touched the 2 screws





If you speak of others, here is how they are mounted.



Thank you very much
__________________

Last edited by Romchou; 04-18-2014 at 10:30 AM.
Romchou is offline   Reply With Quote
Old 04-18-2014, 10:40 AM   #13 (permalink)
Bad Brothers
 
Join Date: Mar 2012
Location: France

Otherwise behind I do not have a screw to adjust the velocity. There is an iron plate instead and velocity is set on the side.

__________________
Romchou is offline   Reply With Quote
Old 04-18-2014, 02:02 PM   #14 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
Quote:
Originally Posted by Romchou View Post
Sorry friend, my English is not very good and I use google translation to communicate. But apparently you like making fun and if it could make you laugh, well you better.



Hello Dukie, you're not talking about these 2 screws ? I never touched the 2 screws

http://img4.hostingpics.net/pics/791769IMG5531.jpg

http://img4.hostingpics.net/pics/987003IMG5532.jpg

If you speak of others, here is how they are mounted.

http://img4.hostingpics.net/pics/356346IMG5533.jpg

Thank you very much
The bottom photo. PERFECt!

Quote:
Originally Posted by Romchou View Post
Otherwise behind I do not have a screw to adjust the velocity. There is an iron plate instead and velocity is set on the side.

http://img4.hostingpics.net/pics/967430IMG5528.jpg
WOW! that is all wrong!

the black piece should be approximately 3mm from the silver piece ( not 15mm). Your paint is way too small or way too large for your barrel. Get a freak barrel or something similar and match it to your paint. That is not right at all !
__________________
DSGs are in stock
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Old 04-19-2014, 11:03 AM   #15 (permalink)
Bad Brothers
 
Join Date: Mar 2012
Location: France

Not the part that was loose from trying to make the Velocity down. Normally it was like that.



Another question for maintenance must use oil or grease ?
__________________
Romchou is offline   Reply With Quote
Old 04-19-2014, 11:16 AM   #16 (permalink)
It's All In The Reflexes.
 
Crimson Death's Avatar
 
Join Date: Nov 2008
Location: Clayton, NJ
Send a message via AIM to Crimson Death

CCM Fan
Brass N Wood Fan
oil.
Crimson Death is offline   Reply With Quote
Old 04-19-2014, 12:53 PM   #17 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
Quote:
Originally Posted by Romchou View Post
Not the part that was loose from trying to make the Velocity down. Normally it was like that.

http://img4.hostingpics.net/pics/381388IMG5534.jpg

Another question for maintenance must use oil or grease ?
The way you had that set in the first photo would increase the velocity. The second photo is correct. Towards the front increase velocity, towards the back decreases velocity. Clockwise turning increase, counterclockwise decreases.

Oil on the hammer. No grease.

What velocity are you at when it is set as shown in the last photo?
__________________
DSGs are in stock
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Old 04-21-2014, 07:48 AM   #18 (permalink)
Bad Brothers
 
Join Date: Mar 2012
Location: France

On my last test I had the first 299, second 280, third 260 and Velocity tumbled with each shot. I do not know what it may come. I'll disassemble whole, all things clean and lubricate all good and I would do tests
__________________
Romchou is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Dukie

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 05:41 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC