mcarterbrown.com  

Reply
 
Thread Tools Search this Thread
Old 04-15-2014, 01:01 PM   #1 (permalink)
Bad Brothers
 
Join Date: Mar 2012
Location: France

Problem with my DSG

Hello, I have a problem with my DSG

I shoot just 10 balls:

1st shot: 290 fps, even when trying to lower the velocity,
2nd shot: 280 fps
3rd shot: 260 fps
4th shot: 220 fps
5th shot: 180 fps
6th shot: 160 fps
7th shooting 120 fps
and it continued to plummet ...

I did the test with 5 or 6 sparclettes by adjusting the velocity each time and always the same.

What could be the problem?

Thank you.
__________________
Romchou is offline   Reply With Quote
Old 04-15-2014, 05:31 PM   #2 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
Quote:
Originally Posted by Romchou View Post
Hello, I have a problem with my DSG

I shoot just 10 balls:

1st shot: 290 fps, even when trying to lower the velocity,
2nd shot: 280 fps
3rd shot: 260 fps
4th shot: 220 fps
5th shot: 180 fps
6th shot: 160 fps
7th shooting 120 fps
and it continued to plummet ...

I did the test with 5 or 6 sparclettes by adjusting the velocity each time and always the same.

What could be the problem?

Thank you.
Make sure there is a valve spring inside. Or you have the screws mixed up and the wrong one in the bolt and the velocity cranked extremely high. Ie the air line through the bolt is nearly completely blocked by the screw.

Those are the only things i can think of.
__________________
DSGs are in stock
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Old 04-16-2014, 04:31 AM   #3 (permalink)
Bad Brothers
 
Join Date: Mar 2012
Location: France

Quote:
Originally Posted by dukie View Post
Make sure there is a valve spring inside. Or you have the screws mixed up and the wrong one in the bolt and the velocity cranked extremely high. Ie the air line through the bolt is nearly completely blocked by the screw.

Those are the only things i can think of.
Ok thank you. By cons I do not see it screw you speak?
__________________
Romchou is offline   Reply With Quote
Old 04-16-2014, 12:31 PM   #4 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
the one in the bolt, one in the hammer, one holding in the feedtube. make sure the short one is in the bolt or you block airflow
__________________
DSGs are in stock
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Old 04-16-2014, 02:25 PM   #5 (permalink)
Bad Brothers
 
Join Date: Mar 2012
Location: France

Ok thank you I'll check. although normally everything should be in place because I've never touched these screws. It is brand new.
__________________
Romchou is offline   Reply With Quote
Old 04-16-2014, 03:38 PM   #6 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
Quote:
Originally Posted by Romchou View Post
Ok thank you I'll check. although normally everything should be in place because I've never touched these screws. It is brand new.
you had to remove.them both to assemble it. you probably switched them when you did it. thats when it usually happens.
__________________
DSGs are in stock
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Old 04-17-2014, 10:37 AM   #7 (permalink)
Bad Brothers
 
Join Date: Mar 2012
Location: France

We should not even talk then screw. You talk about what screws. For one I think you're talking about, they were already assembled
__________________
Romchou is offline   Reply With Quote
Old 04-17-2014, 10:44 AM   #8 (permalink)
Mar
All nail Drum!
 
Mar's Avatar
 
Join Date: Aug 2006
Location: town of Wantmorevaj

Fan of EMR
CCM Fan
Brass N Wood Fan
Palmers Fan
Quote:
Originally Posted by Romchou View Post
We should not even talk then screw.


winner of the internet for 2014!

merci mon grand! J'ai bien rit!
__________________
http://www.mcarterbrown.com/forums/f...-feedback.html

Quote:
Originally Posted by matteekay View Post
Naw, MAr's special. He's like Brad Pitt or George Clooney or something... totally cool to be a little gay for him
Quote:
Originally Posted by Drum View Post
Anyone not wanting to BE Mar is doing it wrong.
Mar is offline   Reply With Quote
Old 04-17-2014, 12:45 PM   #9 (permalink)
more gooder
 
dukie's Avatar
 
Join Date: Apr 2008
Location: Kitchener, Ontario

Fan of EMR
CCM Fan
Quote:
Originally Posted by Romchou View Post
We should not even talk then screw. You talk about what screws. For one I think you're talking about, they were already assembled
that is impossible.

you have to remove the bolt acrew and the pump guide scew to assemble it when you remove it from the box.

trust me i have packed and assembled a few of these.
__________________
DSGs are in stock
My Feedback
first strike pez dispensers in stock - pm me!
dukie is offline   Reply With Quote
Old 04-17-2014, 09:27 PM   #10 (permalink)
It's All In The Reflexes.
 
Crimson Death's Avatar
 
Join Date: Nov 2008
Location: Clayton, NJ
Send a message via AIM to Crimson Death

CCM Fan
Brass N Wood Fan
/popcorn
Crimson Death is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » Dukie

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 04:32 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC