| ||Thread Tools||Search this Thread|
|03-28-2007, 02:28 PM||#1 (permalink)|
Join Date: Jan 2007
Location: Clarksburg, MD (might as well be DC)
Need some help
I'm looking to sell my DM LCD which currently has the Freeflow Anderson Board in it. It came that way and has the stock board as well and I was just wondering where everything hooks up on the stock board since I seem to have 1 too many wiring harnesses coming from the marker itself. I know red-and-black is the battery cable, and I've got 2 white wires leading off of the solenoid. And then a large wiring harness with several black wires leading out of it. What goes where?
The reason I ask is that I figure I can get more out of the board sold separately than in the marker.
|03-29-2007, 03:12 AM||#2 (permalink)|
Join Date: Aug 2006
The extra wiring harness is the eye harness. If the eyes were added aftermarket then the stock board you have probably does not have an eye slot. If its a Dye lcd (as in a true dye not gen-e lcd) then the eye harness will plug into the spare slot just behind the micro switch. That being said the gen-e lcd's also had this slot however they did not have the ace programing so the eyes wont work even if pluged into that slot (this is only true with the gen-e lcd boards)
|Thread Tools||Search this Thread|