Paintball

[madrox68]

OK this gun is clean and I have checked all the o-ring, however when you pull the trigger the noid clicks but it doesn't shoot, the only way to get it to shoot is to hit the back cap de-gas for a few seconds and then it might fire about 3-4 shots, I say might as it doesn't shoot every time you do this. Any idea's? Its not the battery. And the board is a stock board reset to factory settings. Noid issue is my only thought?

[river031403]

Originally Posted by madrox68

OK this gun is clean and I have checked all the o-ring, however when you pull the trigger the noid clicks but it doesn't shoot, the only way to get it to shoot is to hit the back cap de-gas for a few seconds and then it might fire about 3-4 shots, I say might as it doesn't shoot every time you do this. Any idea's? Its not the battery. And the board is a stock board reset to factory settings. Noid issue is my only thought?

sounds like you have roll back issue.
1st remove bolt
then place bolt back in chamber/breach area make sure it is all the way forward pushing the bolt forward until it stops use finger or squeegie then air it up and try that should be solved let me know